pktcSigPulseSignalDuration OBJECT-TYPE
Beacham, et al. Standards Track [Page 23]
SYNTAX Unsigned32 (0..5000)
UNITS "Milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object specifies the pulse duration for each
signal type. In addition, the MTA must accept the values
in the incremental steps specific for each signal type.
The following table defines the default values and the
incremental steps for this object depending on the signal
type:
pktcSigPulseSignaltype Default (ms) Increment (ms)
initialRing 200 50
pulseLoopClose 200 10
pulseLoopOpen 200 10
enableMeterPulse 150 10
meterPulseBurst 150 10
pulseNoBattery 200 10
pulseNormalPolarity 200 10
pulseReducedBattery 200 10
pulseReversePolarity 200 10
An attempt to set this object to a value that does not
fall on one of the increment boundaries, or on the wrong
increment boundary for the specific signal type, will
result in an \inconsistentValue\ error."
REFERENCE
"ETSI-EN-300-324-1 Specification"
View at oid-info.com
This object specifies the pulse duration for each
signal type. In addition, the MTA must accept the values
in the incremental steps specific for each signal type.
The following table defines the default values and the
incremental steps for this object depending on the signal
type:
pktcSigPulseSignaltype Default (ms) Increment (ms)
initialRing 200 50
pulseLoopClose 200 10
pulseLoopOpen 200 10
enableMeterPulse 150 10
meterPulseBurst 150 10
pulseNoBattery 200 10
pulseNormalPolarity 200 10
pulseReducedBattery 200 10
pulseReversePolarity 200 10
An attempt to set this object to a value that does not
fall on one of the increment boundaries, or on the wrong
increment boundary for the specific signal type, will
result in an 'inconsistentValue' error.
Parsed from file rfc5098-PacketCable__IPCablecom-NCS-Signaling.mib.txt
Company: None
Module: PKTC-IETF-SIG-MIB
This object specifies the pulse duration for each
signal type. In addition, the MTA must accept the values
in the incremental steps specific for each signal type.
The following table defines the default values and the
incremental steps for this object depending on the signal
type:
pktcSigPulseSignaltype Default (ms) Increment (ms)
initialRing 200 50
pulseLoopClose 200 10
pulseLoopOpen 200 10
enableMeterPulse 150 10
meterPulseBurst 150 10
pulseNoBattery 200 10
pulseNormalPolarity 200 10
pulseReducedBattery 200 10
pulseReversePolarity 200 10
An attempt to set this object to a value that does not
fall on one of the increment boundaries, or on the wrong
increment boundary for the specific signal type, will
result in an 'inconsistentValue' error.
Parsed from file PKTC-IETF-SIG-MIB.mib
Module: PKTC-IETF-SIG-MIB
Automatically extracted from RFC5098
pktcSigPulseSignalDuration OBJECT-TYPE SYNTAX Unsigned32 (0..5000) UNITS "Milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION " This object specifies the pulse duration for each signal type. In addition, the MTA must accept the values in the incremental steps specific for each signal type. The following table defines the default values and the incremental steps for this object depending on the signal type: pktcSigPulseSignaltype Default (ms) Increment (ms) initialRing 200 50 pulseLoopClose 200 10 pulseLoopOpen 200 10 enableMeterPulse 150 10 meterPulseBurst 150 10 pulseNoBattery 200 10 pulseNormalPolarity 200 10 pulseReducedBattery 200 10 pulseReversePolarity 200 10 An attempt to set this object to a value that does not fall on one of the increment boundaries, or on the wrong increment boundary for the specific signal type, will result in an 'inconsistentValue' error." REFERENCE "ETSI-EN-300-324-1 Specification" ::= {pktcSigPulseSignalEntry 4 }
pktcSigPulseSignalDuration OBJECT-TYPE SYNTAX Unsigned32 (0..5000) UNITS "Milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION " This object specifies the pulse duration for each signal type. In addition, the MTA must accept the values in the incremental steps specific for each signal type. The following table defines the default values and the incremental steps for this object depending on the signal type: pktcSigPulseSignaltype Default (ms) Increment (ms) initialRing 200 50 pulseLoopClose 200 10 pulseLoopOpen 200 10 enableMeterPulse 150 10 meterPulseBurst 150 10 pulseNoBattery 200 10 pulseNormalPolarity 200 10 pulseReducedBattery 200 10 pulseReversePolarity 200 10 An attempt to set this object to a value that does not fall on one of the increment boundaries, or on the wrong increment boundary for the specific signal type, will result in an 'inconsistentValue' error." REFERENCE "ETSI-EN-300-324-1 Specification" ::= {pktcSigPulseSignalEntry 4 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.169.1.1.20.1.1 | pktcSigPulseSignalType | 0 | 0 | There are nine types of international pulse signals. These signals are defined as follows: initial ring pulse loop close pulse loo… |
| 1.3.6.1.2.1.169.1.1.20.1.2 | pktcSigPulseSignalFrequency | 0 | 0 | This object is only applicable to the initialRing, enableMeterPulse, and meterPulseBurst signal types. This object identifies th… |
| 1.3.6.1.2.1.169.1.1.20.1.3 | pktcSigPulseSignalDbLevel | 0 | 0 | This object is only applicable to the enableMeterPulse and meterPulseBurst signal types. This is the decibel level for each freq… |
| 1.3.6.1.2.1.169.1.1.20.1.5 | pktcSigPulseSignalPulseInterval | 0 | 0 | This object specifies the repeat interval, or the period, for each signal type. In addition, the MTA must accept the values in t… |
| 1.3.6.1.2.1.169.1.1.20.1.6 | pktcSigPulseSignalRepeatCount | 0 | 0 | pktcSigPulseSignalRepeatCount OBJECT-TYPE SYNTAX Unsigned32 (1..50) MAX-ACCESS read-write STATUS current DESCRIPTION " This obj… |