OID reference

dsx1LineStatus

1.3.6.1.3.2.6.1.10

Description

This variable indicates the Line Status of the interface. It contains loopback, failure, received 'alarm' and transmitted 'alarms information. The dsx1LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. dsx1NoAlarm must be set if and …

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.3.2.6.1 (dsx1ConfigEntry)
Node code
10
Node name
dsx1LineStatus
Numeric OID
1.3.6.1.3.2.6.1.10
URN notation
urn:oid:1.3.6.1.3.2.6.1.10
Type
OBJECT-TYPE
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 3 2 6 1 10}

  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) t1Carrier(2) dsx1ConfigTable(6) dsx1ConfigEntry(1) dsx1LineStatus(10)}
  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) ds1(2) dsx1ConfigTable(6) dsx1ConfigEntry(1) dsx1LineStatus(10)}
  • {iso(1) org(3) dod(6) internet(1) experimental(3) t1Carrier(2) dsx1ConfigTable(6) dsx1ConfigEntry(1) dsx1LineStatus(10)}
  • {iso(1) org(3) dod(6) internet(1) experimental(3) ds1(2) dsx1ConfigTable(6) dsx1ConfigEntry(1) dsx1LineStatus(10)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) experimental(3) t1Carrier(2) dsx1ConfigTable(6) dsx1ConfigEntry(1) dsx1LineStatus(10)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) experimental(3) ds1(2) dsx1ConfigTable(6) dsx1ConfigEntry(1) dsx1LineStatus(10)}
  • {iso(1) iso-organization(3) dod(6) internet(1) experimental(3) t1Carrier(2) dsx1ConfigTable(6) dsx1ConfigEntry(1) dsx1LineStatus(10)}
  • {iso(1) iso-organization(3) dod(6) internet(1) experimental(3) ds1(2) dsx1ConfigTable(6) dsx1ConfigEntry(1) dsx1LineStatus(10)}
OID-IRI notation
  • /1/3/6/1/3/2/6/1/10
  • /ISO/Identified-Organization/6/1/3/2/6/1/10
  • /ISO/3/6/1/3/2/6/1/10
Named path variants
  • /iso/identified-organization/dod/internet/experimental/t1Carrier/dsx1ConfigTable/dsx1ConfigEntry/dsx1LineStatus
  • /iso/identified-organization/dod/internet/experimental/ds1/dsx1ConfigTable/dsx1ConfigEntry/dsx1LineStatus
  • /iso/identified-organization/dod/internet/experimental/T1-Carrier/dsx1ConfigTable/dsx1ConfigEntry/dsx1LineStatus
  • /iso/org/dod/internet/experimental/t1Carrier/dsx1ConfigTable/dsx1ConfigEntry/dsx1LineStatus
  • /iso/org/dod/internet/experimental/ds1/dsx1ConfigTable/dsx1ConfigEntry/dsx1LineStatus
  • /iso/org/dod/internet/experimental/T1-Carrier/dsx1ConfigTable/dsx1ConfigEntry/dsx1LineStatus
  • /iso/iso-identified-organization/dod/internet/experimental/t1Carrier/dsx1ConfigTable/dsx1ConfigEntry/dsx1LineStatus
  • /iso/iso-identified-organization/dod/internet/experimental/ds1/dsx1ConfigTable/dsx1ConfigEntry/dsx1LineStatus
  • /iso/iso-identified-organization/dod/internet/experimental/T1-Carrier/dsx1ConfigTable/dsx1ConfigEntry/dsx1LineStatus
  • /iso/iso-organization/dod/internet/experimental/t1Carrier/dsx1ConfigTable/dsx1ConfigEntry/dsx1LineStatus
  • /iso/iso-organization/dod/internet/experimental/ds1/dsx1ConfigTable/dsx1ConfigEntry/dsx1LineStatus
  • /iso/iso-organization/dod/internet/experimental/T1-Carrier/dsx1ConfigTable/dsx1ConfigEntry/dsx1LineStatus

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

This variable indicates the Line Status of the
interface. It contains loopback, failure,
received 'alarm' and transmitted 'alarms
information.

The dsx1LineStatus is a bit map represented as a
sum, therefore, it can represent multiple failures
(alarms) and a LoopbackState simultaneously.

dsx1NoAlarm must be set if and only if no other
flag is set.

If the dsx1loopbackState bit is set, the loopback
in effect can be determined from the
dsx1loopbackConfig object.
The various bit positions are:
1 dsx1NoAlarm No alarm present
2 dsx1RcvFarEndLOF Far end LOF (a.k.a., Yellow Alarm)
4 dsx1XmtFarEndLOF Near end sending LOF Indication
8 dsx1RcvAIS Far end sending AIS
16 dsx1XmtAIS Near end sending AIS
32 dsx1LossOfFrame Near end LOF (a.k.a., Red Alarm)
64 dsx1LossOfSignal Near end Loss Of Signal
128 dsx1LoopbackState Near end is looped
256 dsx1T16AIS E1 TS16 AIS
512 dsx1RcvFarEndLOMF Far End Sending TS16 LOMF
1024 dsx1XmtFarEndLOMF Near End Sending TS16 LOMF
2048 dsx1RcvTestCode Near End detects a test code
4096 dsx1OtherFailure any line status not defined here
8192 dsx1UnavailSigState Near End in Unavailable Signal
State
16384 dsx1NetEquipOOS Carrier Equipment Out of Service
32768 dsx1RcvPayloadAIS DS2 Payload AIS
65536 dsx1Ds2PerfThreshold DS2 Performance Threshold
Exceeded
Sources for this description

MIBdepot

Parsed from DS1-MIB.txt · riverstone · DS1-MIB

Historical records

Additional source information

Information from MIBdepot
dsx1LineStatus OBJECT-TYPE
          SYNTAX  INTEGER (1..131071)
          MAX-ACCESS  read-only
          STATUS  current
          DESCRIPTION


                 "This variable indicates the Line Status of the
                 interface.  It contains loopback, failure,
                 received 'alarm' and transmitted 'alarms
                 information.

                 The dsx1LineStatus is a bit map represented as a
                 sum, therefore, it can represent multiple failures
                 (alarms) and a LoopbackState simultaneously.

                 dsx1NoAlarm must be set if and only if no other
                 flag is set.

                 If the dsx1loopbackState bit is set, the loopback
                 in effect can be determined from the
                 dsx1loopbackConfig object.
       The various bit positions are:
      1     dsx1NoAlarm           No alarm present
      2     dsx1RcvFarEndLOF      Far end LOF (a.k.a., Yellow Alarm)
      4     dsx1XmtFarEndLOF      Near end sending LOF Indication
      8     dsx1RcvAIS            Far end sending AIS
     16     dsx1XmtAIS            Near end sending AIS
     32     dsx1LossOfFrame       Near end LOF (a.k.a., Red Alarm)
     64     dsx1LossOfSignal      Near end Loss Of Signal
    128     dsx1LoopbackState     Near end is looped
    256     dsx1T16AIS            E1 TS16 AIS
    512     dsx1RcvFarEndLOMF     Far End Sending TS16 LOMF
   1024     dsx1XmtFarEndLOMF     Near End Sending TS16 LOMF
   2048     dsx1RcvTestCode       Near End detects a test code
   4096     dsx1OtherFailure      any line status not defined here
   8192     dsx1UnavailSigState   Near End in Unavailable Signal
                                  State
  16384     dsx1NetEquipOOS       Carrier Equipment Out of Service
  32768     dsx1RcvPayloadAIS     DS2 Payload AIS
  65536     dsx1Ds2PerfThreshold  DS2 Performance Threshold
                                  Exceeded"
     ::= { dsx1ConfigEntry 10 }

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6)

Defense Communication Agency

Current Registration Authority (inferred from ancestor 1.3.6.1.3)

Internet Assigned Numbers Authority

Siblings (23)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.3.2.6.1.1 dsx1LineIndex00 This object should be made equal to ifIndex. The
next paragraph describes its previous usage.
Making the object equal to ifIndex…
1.3.6.1.3.2.6.1.2 dsx1IfIndex00 This value for this object is equal to the value
of ifIndex from the Interfaces table of MIB II
(RFC 1213).
1.3.6.1.3.2.6.1.3 dsx1TimeElapsed00 The number of seconds that have elapsed since
the beginning of the near end current error-
measurement period. If, for some reas…
1.3.6.1.3.2.6.1.4 dsx1ValidIntervals00 The number of previous near end intervals for
which data was collected. The value will be
96 unless the interface was brought on…
1.3.6.1.3.2.6.1.5 dsx1LineType00 This variable indicates the variety of DS1
Line implementing this circuit. The type of
circuit affects the number of bits…
1.3.6.1.3.2.6.1.6 dsx1LineCoding00 This variable describes the variety of Zero Code


Suppression used on this interface, which in turn
affects a number of its charac…
1.3.6.1.3.2.6.1.7 dsx1SendCode00 This variable indicates what type of code is
being sent across the DS1 interface by the device.
Setting this variable causes the …
1.3.6.1.3.2.6.1.8 dsx1CircuitIdentifier00 This variable contains the transmission vendor's
circuit identifier, for the purpose of
facilitating troubleshooting.
1.3.6.1.3.2.6.1.9 dsx1LoopbackConfig00 This variable represents the desired loopback
configuration of the DS1 interface. Agents
supporting read/write access should ret…
1.3.6.1.3.2.6.1.11 dsx1SignalMode00 'none' indicates that no bits are reserved for
signaling on this channel.

'robbedBit' indicates that DS1 Robbed Bit Sig-
naling i…
1.3.6.1.3.2.6.1.12 dsx1TransmitClockSource00 The source of Transmit Clock.
'loopTiming' indicates that the recovered re-
ceive clock is used as the transmit clock.

'localTimin…
1.3.6.1.3.2.6.1.13 dsx1Fdl00 This bitmap describes the use of the facili-
ties data link, and is the sum of the capabili-
ties. Set any bits that are appro…
1.3.6.1.3.2.6.1.14 dsx1InvalidIntervals00 The number of intervals in the range from 0 to
dsx1ValidIntervals for which no data is
available. This object will typically be …
1.3.6.1.3.2.6.1.15 dsx1LineLength00 The length of the ds1 line in meters. This
objects provides information for line build out
circuitry. This object is only useful…
1.3.6.1.3.2.6.1.16 dsx1LineStatusLastChange00 The value of MIB II's sysUpTime object at the
time this DS1 entered its current line status
state. If the current state was ente…
1.3.6.1.3.2.6.1.17 dsx1LineStatusChangeTrapEnable00 Indicates whether dsx1LineStatusChange traps
should be generated for this interface.
1.3.6.1.3.2.6.1.18 dsx1LoopbackStatus00 This variable represents the current state of the
loopback on the DS1 interface. It contains
information about loopbacks establi…
1.3.6.1.3.2.6.1.19 dsx1Ds1ChannelNumber00 This variable represents the channel number of


the DS1/E1 on its parent Ds2/E2 or DS3/E3. A
value of 0 indicated this DS1/E1 doe…
1.3.6.1.3.2.6.1.20 dsx1Channelization00 Indicates whether this ds1/e1 is channelized or
unchannelized. The value of enabledDs0 indicates
that this is a DS1 channelized …
1.3.6.1.3.2.6.1.21 dsx1LineMode00 This setting puts the T1 framer into either
long-haul (CSU) mode or short-haul (DSU) mode.
1.3.6.1.3.2.6.1.23 dsx1LineImpedance00 Nominal line impedance. For T1 and J1 lines, the
value is typically balanced100ohms(3). For E1
lines, the value is typically un…
1.3.6.1.3.2.6.1.100 dsx1LineBuildOut00 This variable represents the line build out in dB.
1.3.6.1.3.2.6.1.101 dsx1PerformanceReport00 If the value is ds1Mib, then statistics are kept for
this interface.