This variable represents the line build out in dB.
Sources for this description
MIBdepot
Parsed from DS1-MIB.txt · riverstone · DS1-MIB
OID reference
1.3.6.1.3.2.6.1.100
This variable represents the line build out in dB.
Identification
{1 3 6 1 3 2 6 1 100}
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Parsed from DS1-MIB.txt · riverstone · DS1-MIB
Historical records
dsx1LineBuildOut OBJECT-TYPE
SYNTAX INTEGER {
zero(1),
minus7pt5(2),
minus15(3),
minus22pt5(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable represents the line build out in dB."
::= { dsx1ConfigEntry 100 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.3.2.6.1.1 | dsx1LineIndex | 0 | 0 | This object should be made equal to ifIndex. The next paragraph describes its previous usage. Making the object equal to ifIndex… |
| 1.3.6.1.3.2.6.1.2 | dsx1IfIndex | 0 | 0 | This value for this object is equal to the value of ifIndex from the Interfaces table of MIB II (RFC 1213). |
| 1.3.6.1.3.2.6.1.3 | dsx1TimeElapsed | 0 | 0 | The number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reas… |
| 1.3.6.1.3.2.6.1.4 | dsx1ValidIntervals | 0 | 0 | The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought on… |
| 1.3.6.1.3.2.6.1.5 | dsx1LineType | 0 | 0 | This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits… |
| 1.3.6.1.3.2.6.1.6 | dsx1LineCoding | 0 | 0 | This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its charac… |
| 1.3.6.1.3.2.6.1.7 | dsx1SendCode | 0 | 0 | This variable indicates what type of code is being sent across the DS1 interface by the device. Setting this variable causes the … |
| 1.3.6.1.3.2.6.1.8 | dsx1CircuitIdentifier | 0 | 0 | This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. |
| 1.3.6.1.3.2.6.1.9 | dsx1LoopbackConfig | 0 | 0 | This variable represents the desired loopback configuration of the DS1 interface. Agents supporting read/write access should ret… |
| 1.3.6.1.3.2.6.1.10 | dsx1LineStatus | 0 | 0 | This variable indicates the Line Status of the interface. It contains loopback, failure, received 'alarm' and transmitted 'alarm… |
| 1.3.6.1.3.2.6.1.11 | dsx1SignalMode | 0 | 0 | 'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that DS1 Robbed Bit Sig- naling i… |
| 1.3.6.1.3.2.6.1.12 | dsx1TransmitClockSource | 0 | 0 | The source of Transmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTimin… |
| 1.3.6.1.3.2.6.1.13 | dsx1Fdl | 0 | 0 | This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties. Set any bits that are appro… |
| 1.3.6.1.3.2.6.1.14 | dsx1InvalidIntervals | 0 | 0 | The number of intervals in the range from 0 to dsx1ValidIntervals for which no data is available. This object will typically be … |
| 1.3.6.1.3.2.6.1.15 | dsx1LineLength | 0 | 0 | The length of the ds1 line in meters. This objects provides information for line build out circuitry. This object is only useful… |
| 1.3.6.1.3.2.6.1.16 | dsx1LineStatusLastChange | 0 | 0 | The value of MIB II's sysUpTime object at the time this DS1 entered its current line status state. If the current state was ente… |
| 1.3.6.1.3.2.6.1.17 | dsx1LineStatusChangeTrapEnable | 0 | 0 | Indicates whether dsx1LineStatusChange traps should be generated for this interface. |
| 1.3.6.1.3.2.6.1.18 | dsx1LoopbackStatus | 0 | 0 | This variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks establi… |
| 1.3.6.1.3.2.6.1.19 | dsx1Ds1ChannelNumber | 0 | 0 | This variable represents the channel number of the DS1/E1 on its parent Ds2/E2 or DS3/E3. A value of 0 indicated this DS1/E1 doe… |
| 1.3.6.1.3.2.6.1.20 | dsx1Channelization | 0 | 0 | Indicates whether this ds1/e1 is channelized or unchannelized. The value of enabledDs0 indicates that this is a DS1 channelized … |
| 1.3.6.1.3.2.6.1.21 | dsx1LineMode | 0 | 0 | This setting puts the T1 framer into either long-haul (CSU) mode or short-haul (DSU) mode. |
| 1.3.6.1.3.2.6.1.23 | dsx1LineImpedance | 0 | 0 | Nominal line impedance. For T1 and J1 lines, the value is typically balanced100ohms(3). For E1 lines, the value is typically un… |
| 1.3.6.1.3.2.6.1.101 | dsx1PerformanceReport | 0 | 0 | If the value is ds1Mib, then statistics are kept for this interface. |