OID reference

dsx1SendCode

1.3.6.1.3.2.6.1.7

Description

This variable indicates what type of code is being sent across the DS1 interface by the device. Setting this variable causes the interface to send the code requested. The values mean: dsx1SendNoCode sending looped or normal data dsx1SendLineCode sending a request for a line loopback dsx1SendPayloadCode sending a reque…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.3.2.6.1 (dsx1ConfigEntry)
Node code
7
Node name
dsx1SendCode
Numeric OID
1.3.6.1.3.2.6.1.7
URN notation
urn:oid:1.3.6.1.3.2.6.1.7
Type
OBJECT-TYPE
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 3 2 6 1 7}

  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) t1Carrier(2) dsx1ConfigTable(6) dsx1ConfigEntry(1) dsx1SendCode(7)}
  • {iso(1) identified-organization(3) dod(6) internet(1) experimental(3) ds1(2) dsx1ConfigTable(6) dsx1ConfigEntry(1) dsx1SendCode(7)}
  • {iso(1) org(3) dod(6) internet(1) experimental(3) t1Carrier(2) dsx1ConfigTable(6) dsx1ConfigEntry(1) dsx1SendCode(7)}
  • {iso(1) org(3) dod(6) internet(1) experimental(3) ds1(2) dsx1ConfigTable(6) dsx1ConfigEntry(1) dsx1SendCode(7)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) experimental(3) t1Carrier(2) dsx1ConfigTable(6) dsx1ConfigEntry(1) dsx1SendCode(7)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) experimental(3) ds1(2) dsx1ConfigTable(6) dsx1ConfigEntry(1) dsx1SendCode(7)}
  • {iso(1) iso-organization(3) dod(6) internet(1) experimental(3) t1Carrier(2) dsx1ConfigTable(6) dsx1ConfigEntry(1) dsx1SendCode(7)}
  • {iso(1) iso-organization(3) dod(6) internet(1) experimental(3) ds1(2) dsx1ConfigTable(6) dsx1ConfigEntry(1) dsx1SendCode(7)}
OID-IRI notation
  • /1/3/6/1/3/2/6/1/7
  • /ISO/Identified-Organization/6/1/3/2/6/1/7
  • /ISO/3/6/1/3/2/6/1/7
Named path variants
  • /iso/identified-organization/dod/internet/experimental/t1Carrier/dsx1ConfigTable/dsx1ConfigEntry/dsx1SendCode
  • /iso/identified-organization/dod/internet/experimental/ds1/dsx1ConfigTable/dsx1ConfigEntry/dsx1SendCode
  • /iso/identified-organization/dod/internet/experimental/T1-Carrier/dsx1ConfigTable/dsx1ConfigEntry/dsx1SendCode
  • /iso/org/dod/internet/experimental/t1Carrier/dsx1ConfigTable/dsx1ConfigEntry/dsx1SendCode
  • /iso/org/dod/internet/experimental/ds1/dsx1ConfigTable/dsx1ConfigEntry/dsx1SendCode
  • /iso/org/dod/internet/experimental/T1-Carrier/dsx1ConfigTable/dsx1ConfigEntry/dsx1SendCode
  • /iso/iso-identified-organization/dod/internet/experimental/t1Carrier/dsx1ConfigTable/dsx1ConfigEntry/dsx1SendCode
  • /iso/iso-identified-organization/dod/internet/experimental/ds1/dsx1ConfigTable/dsx1ConfigEntry/dsx1SendCode
  • /iso/iso-identified-organization/dod/internet/experimental/T1-Carrier/dsx1ConfigTable/dsx1ConfigEntry/dsx1SendCode
  • /iso/iso-organization/dod/internet/experimental/t1Carrier/dsx1ConfigTable/dsx1ConfigEntry/dsx1SendCode
  • /iso/iso-organization/dod/internet/experimental/ds1/dsx1ConfigTable/dsx1ConfigEntry/dsx1SendCode
  • /iso/iso-organization/dod/internet/experimental/T1-Carrier/dsx1ConfigTable/dsx1ConfigEntry/dsx1SendCode

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

This variable indicates what type of code is
being sent across the DS1 interface by the device.
Setting this variable causes the interface to send
the code requested. The values mean:
dsx1SendNoCode
sending looped or normal data

dsx1SendLineCode
sending a request for a line loopback

dsx1SendPayloadCode
sending a request for a payload loopback

dsx1SendResetCode
sending a loopback termination request

dsx1SendQRS
sending a Quasi-Random Signal (QRS) test
pattern

dsx1Send511Pattern
sending a 511 bit fixed test pattern

dsx1Send3in24Pattern
sending a fixed test pattern of 3 bits set
in 24

dsx1SendOtherTestPattern
sending a test pattern other than those
described by this object
Sources for this description

MIBdepot

Parsed from DS1-MIB.txt · riverstone · DS1-MIB

Historical records

Additional source information

Information from MIBdepot
dsx1SendCode OBJECT-TYPE
          SYNTAX  INTEGER {
                    dsx1SendNoCode(1),
                    dsx1SendLineCode(2),
                    dsx1SendPayloadCode(3),
                    dsx1SendResetCode(4),
                    dsx1SendQRS(5),
                    dsx1Send511Pattern(6),
                    dsx1Send3in24Pattern(7),
                    dsx1SendOtherTestPattern(8)
                    }
          MAX-ACCESS  read-write
          STATUS  current
          DESCRIPTION


                 "This variable indicates what type of code is
                 being sent across the DS1 interface by the device.
                 Setting this variable causes the interface to send
                 the code requested.  The values mean:
           dsx1SendNoCode
                sending looped or normal data

           dsx1SendLineCode
                sending a request for a line loopback

           dsx1SendPayloadCode
                sending a request for a payload loopback

           dsx1SendResetCode
                sending a loopback termination request

           dsx1SendQRS
                sending a Quasi-Random Signal  (QRS)  test
                pattern

           dsx1Send511Pattern
                sending a 511 bit fixed test pattern

           dsx1Send3in24Pattern
                sending a fixed test pattern of 3 bits set
                in 24

           dsx1SendOtherTestPattern
                sending a test pattern  other  than  those
                described by this object"
::= { dsx1ConfigEntry 7 }

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6)

Defense Communication Agency

Current Registration Authority (inferred from ancestor 1.3.6.1.3)

Internet Assigned Numbers Authority

Siblings (23)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.3.2.6.1.1 dsx1LineIndex00 This object should be made equal to ifIndex. The
next paragraph describes its previous usage.
Making the object equal to ifIndex…
1.3.6.1.3.2.6.1.2 dsx1IfIndex00 This value for this object is equal to the value
of ifIndex from the Interfaces table of MIB II
(RFC 1213).
1.3.6.1.3.2.6.1.3 dsx1TimeElapsed00 The number of seconds that have elapsed since
the beginning of the near end current error-
measurement period. If, for some reas…
1.3.6.1.3.2.6.1.4 dsx1ValidIntervals00 The number of previous near end intervals for
which data was collected. The value will be
96 unless the interface was brought on…
1.3.6.1.3.2.6.1.5 dsx1LineType00 This variable indicates the variety of DS1
Line implementing this circuit. The type of
circuit affects the number of bits…
1.3.6.1.3.2.6.1.6 dsx1LineCoding00 This variable describes the variety of Zero Code


Suppression used on this interface, which in turn
affects a number of its charac…
1.3.6.1.3.2.6.1.8 dsx1CircuitIdentifier00 This variable contains the transmission vendor's
circuit identifier, for the purpose of
facilitating troubleshooting.
1.3.6.1.3.2.6.1.9 dsx1LoopbackConfig00 This variable represents the desired loopback
configuration of the DS1 interface. Agents
supporting read/write access should ret…
1.3.6.1.3.2.6.1.10 dsx1LineStatus00 This variable indicates the Line Status of the
interface. It contains loopback, failure,
received 'alarm' and transmitted 'alarm…
1.3.6.1.3.2.6.1.11 dsx1SignalMode00 'none' indicates that no bits are reserved for
signaling on this channel.

'robbedBit' indicates that DS1 Robbed Bit Sig-
naling i…
1.3.6.1.3.2.6.1.12 dsx1TransmitClockSource00 The source of Transmit Clock.
'loopTiming' indicates that the recovered re-
ceive clock is used as the transmit clock.

'localTimin…
1.3.6.1.3.2.6.1.13 dsx1Fdl00 This bitmap describes the use of the facili-
ties data link, and is the sum of the capabili-
ties. Set any bits that are appro…
1.3.6.1.3.2.6.1.14 dsx1InvalidIntervals00 The number of intervals in the range from 0 to
dsx1ValidIntervals for which no data is
available. This object will typically be …
1.3.6.1.3.2.6.1.15 dsx1LineLength00 The length of the ds1 line in meters. This
objects provides information for line build out
circuitry. This object is only useful…
1.3.6.1.3.2.6.1.16 dsx1LineStatusLastChange00 The value of MIB II's sysUpTime object at the
time this DS1 entered its current line status
state. If the current state was ente…
1.3.6.1.3.2.6.1.17 dsx1LineStatusChangeTrapEnable00 Indicates whether dsx1LineStatusChange traps
should be generated for this interface.
1.3.6.1.3.2.6.1.18 dsx1LoopbackStatus00 This variable represents the current state of the
loopback on the DS1 interface. It contains
information about loopbacks establi…
1.3.6.1.3.2.6.1.19 dsx1Ds1ChannelNumber00 This variable represents the channel number of


the DS1/E1 on its parent Ds2/E2 or DS3/E3. A
value of 0 indicated this DS1/E1 doe…
1.3.6.1.3.2.6.1.20 dsx1Channelization00 Indicates whether this ds1/e1 is channelized or
unchannelized. The value of enabledDs0 indicates
that this is a DS1 channelized …
1.3.6.1.3.2.6.1.21 dsx1LineMode00 This setting puts the T1 framer into either
long-haul (CSU) mode or short-haul (DSU) mode.
1.3.6.1.3.2.6.1.23 dsx1LineImpedance00 Nominal line impedance. For T1 and J1 lines, the
value is typically balanced100ohms(3). For E1
lines, the value is typically un…
1.3.6.1.3.2.6.1.100 dsx1LineBuildOut00 This variable represents the line build out in dB.
1.3.6.1.3.2.6.1.101 dsx1PerformanceReport00 If the value is ds1Mib, then statistics are kept for
this interface.