The purpose of this object is to uniquely identity
a tunnel within a network. When the MPLS
signalling protoocol is rsvp(2) this value should
mimic the Extended Tunnel Id field in the Session
object. When the MPLS signalling protoocol is
crldp(3) this value should mimic the Ingress LSR
Router ID field in the LSPID TLV object.
Parsed from file MPLS-TE-MIB.mib
Module: MPLS-TE-MIB
The purpose of this object is to uniquely identity
a tunnel within a network. When the MPLS
signalling protoocol is rsvp(2) this value should
mimic the Extended Tunnel Id field in the Session
object. When the MPLS signalling protoocol is
crldp(3) this value should mimic the Ingress LSR
Router ID field in the LSPID TLV object.
mplsTunnelIngressLSRId OBJECT-TYPE
SYNTAX MplsLsrId
MAX-ACCESS not-accessible
-- NOTE:
-- The max access of this object at the time of implementation
-- of this MIB was accessible-for-notify. This was to allow
-- this index to be included in the notifications. This causes
-- some MIB compilers to fail. This has been changed in the
-- latest version of the Internet draft, but the agent implementation
-- still reflects the older version.
STATUS current
DESCRIPTION
"The purpose of this object is to uniquely identity
a tunnel within a network. When the MPLS
signalling protoocol is rsvp(2) this value should
mimic the Extended Tunnel Id field in the Session
object. When the MPLS signalling protoocol is
crldp(3) this value should mimic the Ingress LSR
Router ID field in the LSPID TLV object."
REFERENCE
"1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
Awduche et al, Internet Draft
2. Constraint-Based LSP Setup using LDP, Jamoussi,
Internet Draft
July 2000."
View at oid-info.com
The purpose of this object is to uniquely identity a
tunnel within a network. When the MPLS signalling
protoocol is rsvp(2) this value SHOULD mimic the
Extended Tunnel Id field in the SESSION object.
When the MPLS signalling protoocol is crldp(3) this
value SHOULD mimic the Ingress LSR Router ID field
in the LSPID TLV object.
Parsed from file mpls-te.mib.txt
Company: None
Module: MPLS-TE-MIB
The purpose of this object is to uniquely identity
a tunnel within a network. When the MPLS
signalling protoocol is rsvp(2) this value should
mimic the Extended Tunnel Id field in the Session
object. When the MPLS signalling protoocol is
crldp(3) this value should mimic the Ingress LSR
Router ID field in the LSPID TLV object.
mplsTunnelIngressLSRId OBJECT-TYPE SYNTAX MplsLsrId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The purpose of this object is to uniquely identity a tunnel within a network. When the MPLS signalling protoocol is rsvp(2) this value should mimic the Extended Tunnel Id field in the Session object. When the MPLS signalling protoocol is crldp(3) this value should mimic the Ingress LSR Router ID field in the LSPID TLV object." REFERENCE "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al, Internet Draft
, August 2000., 2. Constraint-Based LSP Setup using LDP, Jamoussi, Internet Draft , July 2000." ::= { mplsTunnelEntry 3 }
mplsTunnelIngressLSRId OBJECT-TYPE SYNTAX MplsLsrId ACCESS not-accessible STATUS mandatory DESCRIPTION "The purpose of this object is to uniquely identity a tunnel within a network. When the MPLS signalling protoocol is rsvp(2) this value should mimic the Extended Tunnel Id field in the Session object. When the MPLS signalling protoocol is crldp(3) this value should mimic the Ingress LSR Router ID field in the LSPID TLV object." REFERENCE "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al, Internet Draft
, August 2000., 2. Constraint-Based LSP Setup using LDP, Jamoussi, Internet Draft , July 2000." ::= { mplsTunnelEntry 3 }
Automatically extracted from Cisco "SNMP v2 MIBs".
mplsTunnelIngressLSRId OBJECT-TYPE SYNTAX MplsLsrIdentifier MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The purpose of this object is to uniquely identity a tunnel within a network. When the MPLS signalling protoocol is rsvp(2) this value SHOULD mimic the Extended Tunnel Id field in the SESSION object. When the MPLS signalling protoocol is crldp(3) this value SHOULD mimic the Ingress LSR Router ID field in the LSPID TLV object." REFERENCE "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al, Internet Draft
, February 2001., 2. Constraint-Based LSP Setup using LDP, Jamoussi, Internet Draft , February 2001." ::= { mplsTunnelEntry 3 }
mplsTunnelIngressLSRId OBJECT-TYPE SYNTAX MplsLsrId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The purpose of this object is to uniquely identity a tunnel within a network. When the MPLS signalling protoocol is rsvp(2) this value should mimic the Extended Tunnel Id field in the Session object. When the MPLS signalling protoocol is crldp(3) this value should mimic the Ingress LSR Router ID field in the LSPID TLV object." REFERENCE "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al, Internet Draft
, August 2000., 2. Constraint-Based LSP Setup using LDP, Jamoussi, Internet Draft , July 2000." ::= { mplsTunnelEntry 3 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.3.95.2.2.1.1 | mplsTunnelIndex | 0 | 0 | Uniquely identifies this row. |
1.3.6.1.3.95.2.2.1.2 | mplsTunnelInstance | 0 | 0 | Uniquely identifies an instance of a tunnel. It is useful to identify multiple instances of tunnels for the purposes of backup an… |
1.3.6.1.3.95.2.2.1.4 | mplsTunnelEgressLSRId | 0 | 0 | Specifies the egress LSR Id. |
1.3.6.1.3.95.2.2.1.5 | mplsTunnelName | 0 | 0 | The canonical name assigned to the tunnel. This name can be used to refer to the tunnel on the LSRs console port. If mplsTunnel… |
1.3.6.1.3.95.2.2.1.6 | mplsTunnelDescr | 0 | 0 | A textual string containing information about the tunnel. If there is no description this object contains a zero length string. |
1.3.6.1.3.95.2.2.1.7 | mplsTunnelIsIf | 0 | 0 | Denotes whether or not this tunnel corresponds to an interface represented in the interfaces group table. Note that if this varia… |
1.3.6.1.3.95.2.2.1.8 | mplsTunnelIfIndex | 0 | 0 | If mplsTunnelIsIf is set to true, then this value contains the LSR-assigned ifIndex which corresponds to an entry in the interfac… |
1.3.6.1.3.95.2.2.1.9 | mplsTunnelXCPointer | 0 | 0 | This variable points to a row in the mplsXCTable. This table identifies the segments that compose this tunnel, their characterist… |
1.3.6.1.3.95.2.2.1.10 | mplsTunnelSignallingProto | 0 | 0 | The signaling protocol, if any, which was used to setup this tunnel. |
1.3.6.1.3.95.2.2.1.11 | mplsTunnelSetupPrio | 0 | 0 | Indicates the setup priority of this tunnel. |
1.3.6.1.3.95.2.2.1.12 | mplsTunnelHoldingPrio | 0 | 0 | Indicates the holding priority for this tunnel. |
1.3.6.1.3.95.2.2.1.13 | mplsTunnelSessionAttributes | 0 | 0 | This bitmask indicates optional session values for this tunnel. The following describes these bitfields: fastRerouteThis flag ind… |
1.3.6.1.3.95.2.2.1.14 | mplsTunnelOwner | 0 | 0 | Indicates which protocol created and is responsible for managing this tunnel. Values rsvp(2) and crldp(3) should not be used at t… |
1.3.6.1.3.95.2.2.1.15 | mplsTunnelLocalProtectInUse | 0 | 0 | Indicates that the local repair mechanism is in use to maintain this tunnel (usually in the face of an outage of the link it was … |
1.3.6.1.3.95.2.2.1.16 | mplsTunnelResourcePointer | 0 | 0 | This variable represents a pointer to the traffic parameter specification for this tunnel. This value may point at an entry in t… |
1.3.6.1.3.95.2.2.1.17 | mplsTunnelInstancePriority | 0 | 0 | This value indicates which priority, in descending order, with 0 indicating the lowest priority, within a group of tunnel instanc… |
1.3.6.1.3.95.2.2.1.18 | mplsTunnelHopTableIndex | 0 | 0 | Index into the mplsTunnelHopTable entry that specifies the explicit route hops for this tunnel. |
1.3.6.1.3.95.2.2.1.19 | mplsTunnelARHopTableIndex | 0 | 0 | Index into the mplsTunnelARHopTable entry that specifies the actual hops traversed by the tunnel. |
1.3.6.1.3.95.2.2.1.20 | mplsTunnelCHopTableIndex | 0 | 0 | Index into the mplsTunnelCHopTable entry that specifies the computed hops traversed by the tunnel. |
1.3.6.1.3.95.2.2.1.21 | mplsTunnelPrimaryInstance | 0 | 0 | Specifies the instance index of the primary instance of this tunnel. |
1.3.6.1.3.95.2.2.1.22 | mplsTunnelPrimaryTimeUp | 0 | 0 | Specifies the total time the primary instance of this tunnel has been active. The primary instance of this tunnel is defined in mp… |
1.3.6.1.3.95.2.2.1.23 | mplsTunnelPathChanges | 0 | 0 | Specifies the number of times the paths has changed for this tunnel. |
1.3.6.1.3.95.2.2.1.24 | mplsTunnelLastPathChange | 0 | 0 | Specifies the time since the last path change for this tunnel. |
1.3.6.1.3.95.2.2.1.25 | mplsTunnelCreationTime | 0 | 0 | Specifies the value of SysUpTime when the first instance of this tunnel came into existence. |
1.3.6.1.3.95.2.2.1.26 | mplsTunnelStateTransitions | 0 | 0 | Specifies the number of times the state of this tunnel instance has changed. |
1.3.6.1.3.95.2.2.1.27 | mplsTunnelIncludeAnyAffinity | 0 | 0 | A link satisfies the include-any constraint if and only if the constraint is zero, or the link and the constraint have a resource… |
1.3.6.1.3.95.2.2.1.28 | mplsTunnelIncludeAllAffinity | 0 | 0 | A link satisfies the include-all constraint if and only if the link contains all of the adminstrative groups specified in the con… |
1.3.6.1.3.95.2.2.1.29 | mplsTunnelExcludeAllAffinity | 0 | 0 | A link satisfies the exclude-all constraint if and only if the link contains none of the adminstrative groups specifie in the con… |
1.3.6.1.3.95.2.2.1.30 | mplsTunnelPathInUse | 0 | 0 | This value denotes the configured path that was chosen for this tunnel. This value reflects the secondary index into the TunnelHo… |
1.3.6.1.3.95.2.2.1.31 | mplsTunnelRole | 0 | 0 | This value signifies the role that this tunnel entry/instance represents. This value MUST be set to head(1) at the originating po… |
1.3.6.1.3.95.2.2.1.32 | mplsTunnelTotalUpTime | 0 | 0 | This value represents the aggregate up time for all instances of this tunnel, if available. If this value is unavailable, it MUST… |
1.3.6.1.3.95.2.2.1.33 | mplsTunnelInstanceUpTime | 0 | 0 | This value identifies the total time that this tunnel instance's operStatus has been Up(1). |
1.3.6.1.3.95.2.2.1.34 | mplsTunnelAdminStatus | 0 | 0 | Indicates the desired operational status of this tunnel. |
1.3.6.1.3.95.2.2.1.35 | mplsTunnelOperStatus | 0 | 0 | Indicates the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individ… |
1.3.6.1.3.95.2.2.1.36 | mplsTunnelRowStatus | 0 | 0 | This variable is used to create, modify, and/or delete a row in this table. |
1.3.6.1.3.95.2.2.1.37 | mplsTunnelStorageType | 0 | 0 | This variable indicates the storage type for this object. |