If mplsTunnelIsIf is set to true, then this value
contains the LSR-assigned ifIndex which
corresponds to an entry in the interfaces table.
Otherwise this variable should contain the value
of zero indicating that a valid ifIndex was not
assigned to this tunnel interface.
Parsed from file MPLS-TE-MIB.mib
Module: MPLS-TE-MIB
If mplsTunnelIsIf is set to true, then this value
contains the LSR-assigned ifIndex which
corresponds to an entry in the interfaces table.
Otherwise this variable should contain the value
of zero indicating that a valid ifIndex was not
assigned to this tunnel interface.
mplsTunnelIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If mplsTunnelIsIf is set to true, then this value
contains the LSR-assigned ifIndex which
corresponds to an entry in the interfaces table.
Otherwise this variable should contain the value
of zero indicating that a valid ifIndex was not
assigned to this tunnel interface."
REFERENCE
"RFC 2233 - The Interfaces Group MIB using SMIv2,
McCloghrie, K., and F. Kastenholtz, Nov. 1997"
View at oid-info.com
If mplsTunnelIsIf is set to true, then this value
contains the LSR-assigned ifIndex which corresponds
to an entry in the interfaces table. Otherwise
this variable should contain the value of zero
indicating that a valid ifIndex was not assigned to
this tunnel interface.
Parsed from file mpls-te.mib.txt
Company: None
Module: MPLS-TE-MIB
If mplsTunnelIsIf is set to true, then this value
contains the LSR-assigned ifIndex which
corresponds to an entry in the interfaces table.
Otherwise this variable should contain the value
of zero indicating that a valid ifIndex was not
assigned to this tunnel interface.
mplsTunnelIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "If mplsTunnelIsIf is set to true, then this value contains the LSR-assigned ifIndex which corresponds to an entry in the interfaces table. Otherwise this variable should contain the value of zero indicating that a valid ifIndex was not assigned to this tunnel interface." REFERENCE "RFC 2233 - The Interfaces Group MIB using SMIv2, McCloghrie, K., and F. Kastenholtz, Nov. 1997" ::= { mplsTunnelEntry 8 }
mplsTunnelIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero ACCESS read-only STATUS mandatory DESCRIPTION "If mplsTunnelIsIf is set to true, then this value contains the LSR-assigned ifIndex which corresponds to an entry in the interfaces table. Otherwise this variable should contain the value of zero indicating that a valid ifIndex was not assigned to this tunnel interface." REFERENCE "RFC 2233 - The Interfaces Group MIB using SMIv2, McCloghrie, K., and F. Kastenholtz, Nov. 1997" ::= { mplsTunnelEntry 8 }
Automatically extracted from Cisco "SNMP v2 MIBs".
mplsTunnelIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "If mplsTunnelIsIf is set to true, then this value contains the LSR-assigned ifIndex which corresponds to an entry in the interfaces table. Otherwise this variable should contain the value of zero indicating that a valid ifIndex was not assigned to this tunnel interface." REFERENCE "RFC 2233 - The Interfaces Group MIB using SMIv2, McCloghrie, K., and F. Kastenholtz, Nov. 1997" ::= { mplsTunnelEntry 8 }
mplsTunnelIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "If mplsTunnelIsIf is set to true, then this value contains the LSR-assigned ifIndex which corresponds to an entry in the interfaces table. Otherwise this variable should contain the value of zero indicating that a valid ifIndex was not assigned to this tunnel interface." REFERENCE "RFC 2233 - The Interfaces Group MIB using SMIv2, McCloghrie, K., and F. Kastenholtz, Nov. 1997" ::= { mplsTunnelEntry 8 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.3.95.2.2.1.1 | mplsTunnelIndex | 0 | 0 | Uniquely identifies this row. |
| 1.3.6.1.3.95.2.2.1.2 | mplsTunnelInstance | 0 | 0 | Uniquely identifies an instance of a tunnel. It is useful to identify multiple instances of tunnels for the purposes of backup an… |
| 1.3.6.1.3.95.2.2.1.3 | mplsTunnelIngressLSRId | 0 | 0 | The purpose of this object is to uniquely identity a tunnel within a network. When the MPLS signalling protoocol is rsvp(2) this … |
| 1.3.6.1.3.95.2.2.1.4 | mplsTunnelEgressLSRId | 0 | 0 | Specifies the egress LSR Id. |
| 1.3.6.1.3.95.2.2.1.5 | mplsTunnelName | 0 | 0 | The canonical name assigned to the tunnel. This name can be used to refer to the tunnel on the LSRs console port. If mplsTunnel… |
| 1.3.6.1.3.95.2.2.1.6 | mplsTunnelDescr | 0 | 0 | A textual string containing information about the tunnel. If there is no description this object contains a zero length string. |
| 1.3.6.1.3.95.2.2.1.7 | mplsTunnelIsIf | 0 | 0 | Denotes whether or not this tunnel corresponds to an interface represented in the interfaces group table. Note that if this varia… |
| 1.3.6.1.3.95.2.2.1.9 | mplsTunnelXCPointer | 0 | 0 | This variable points to a row in the mplsXCTable. This table identifies the segments that compose this tunnel, their characterist… |
| 1.3.6.1.3.95.2.2.1.10 | mplsTunnelSignallingProto | 0 | 0 | The signaling protocol, if any, which was used to setup this tunnel. |
| 1.3.6.1.3.95.2.2.1.11 | mplsTunnelSetupPrio | 0 | 0 | Indicates the setup priority of this tunnel. |
| 1.3.6.1.3.95.2.2.1.12 | mplsTunnelHoldingPrio | 0 | 0 | Indicates the holding priority for this tunnel. |
| 1.3.6.1.3.95.2.2.1.13 | mplsTunnelSessionAttributes | 0 | 0 | This bitmask indicates optional session values for this tunnel. The following describes these bitfields: fastRerouteThis flag ind… |
| 1.3.6.1.3.95.2.2.1.14 | mplsTunnelOwner | 0 | 0 | Indicates which protocol created and is responsible for managing this tunnel. Values rsvp(2) and crldp(3) should not be used at t… |
| 1.3.6.1.3.95.2.2.1.15 | mplsTunnelLocalProtectInUse | 0 | 0 | Indicates that the local repair mechanism is in use to maintain this tunnel (usually in the face of an outage of the link it was … |
| 1.3.6.1.3.95.2.2.1.16 | mplsTunnelResourcePointer | 0 | 0 | This variable represents a pointer to the traffic parameter specification for this tunnel. This value may point at an entry in t… |
| 1.3.6.1.3.95.2.2.1.17 | mplsTunnelInstancePriority | 0 | 0 | This value indicates which priority, in descending order, with 0 indicating the lowest priority, within a group of tunnel instanc… |
| 1.3.6.1.3.95.2.2.1.18 | mplsTunnelHopTableIndex | 0 | 0 | Index into the mplsTunnelHopTable entry that specifies the explicit route hops for this tunnel. |
| 1.3.6.1.3.95.2.2.1.19 | mplsTunnelARHopTableIndex | 0 | 0 | Index into the mplsTunnelARHopTable entry that specifies the actual hops traversed by the tunnel. |
| 1.3.6.1.3.95.2.2.1.20 | mplsTunnelCHopTableIndex | 0 | 0 | Index into the mplsTunnelCHopTable entry that specifies the computed hops traversed by the tunnel. |
| 1.3.6.1.3.95.2.2.1.21 | mplsTunnelPrimaryInstance | 0 | 0 | Specifies the instance index of the primary instance of this tunnel. |
| 1.3.6.1.3.95.2.2.1.22 | mplsTunnelPrimaryTimeUp | 0 | 0 | Specifies the total time the primary instance of this tunnel has been active. The primary instance of this tunnel is defined in mp… |
| 1.3.6.1.3.95.2.2.1.23 | mplsTunnelPathChanges | 0 | 0 | Specifies the number of times the paths has changed for this tunnel. |
| 1.3.6.1.3.95.2.2.1.24 | mplsTunnelLastPathChange | 0 | 0 | Specifies the time since the last path change for this tunnel. |
| 1.3.6.1.3.95.2.2.1.25 | mplsTunnelCreationTime | 0 | 0 | Specifies the value of SysUpTime when the first instance of this tunnel came into existence. |
| 1.3.6.1.3.95.2.2.1.26 | mplsTunnelStateTransitions | 0 | 0 | Specifies the number of times the state of this tunnel instance has changed. |
| 1.3.6.1.3.95.2.2.1.27 | mplsTunnelIncludeAnyAffinity | 0 | 0 | A link satisfies the include-any constraint if and only if the constraint is zero, or the link and the constraint have a resource… |
| 1.3.6.1.3.95.2.2.1.28 | mplsTunnelIncludeAllAffinity | 0 | 0 | A link satisfies the include-all constraint if and only if the link contains all of the adminstrative groups specified in the con… |
| 1.3.6.1.3.95.2.2.1.29 | mplsTunnelExcludeAllAffinity | 0 | 0 | A link satisfies the exclude-all constraint if and only if the link contains none of the adminstrative groups specifie in the con… |
| 1.3.6.1.3.95.2.2.1.30 | mplsTunnelPathInUse | 0 | 0 | This value denotes the configured path that was chosen for this tunnel. This value reflects the secondary index into the TunnelHo… |
| 1.3.6.1.3.95.2.2.1.31 | mplsTunnelRole | 0 | 0 | This value signifies the role that this tunnel entry/instance represents. This value MUST be set to head(1) at the originating po… |
| 1.3.6.1.3.95.2.2.1.32 | mplsTunnelTotalUpTime | 0 | 0 | This value represents the aggregate up time for all instances of this tunnel, if available. If this value is unavailable, it MUST… |
| 1.3.6.1.3.95.2.2.1.33 | mplsTunnelInstanceUpTime | 0 | 0 | This value identifies the total time that this tunnel instance's operStatus has been Up(1). |
| 1.3.6.1.3.95.2.2.1.34 | mplsTunnelAdminStatus | 0 | 0 | Indicates the desired operational status of this tunnel. |
| 1.3.6.1.3.95.2.2.1.35 | mplsTunnelOperStatus | 0 | 0 | Indicates the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individ… |
| 1.3.6.1.3.95.2.2.1.36 | mplsTunnelRowStatus | 0 | 0 | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.3.95.2.2.1.37 | mplsTunnelStorageType | 0 | 0 | This variable indicates the storage type for this object. |