Status in source: deprecated.
Names: recConfigCompareValue2
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"recConfigCompareValue2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"MAX-ACCESS",
"read-write",
"STATUS",
"deprecated",
"DESCRIPTION",
"\"<Definition>If the recConfigMode is set to hysteresisBound, this object specifies the second comparison value for the hysteresis. If the recConfigMode is set to greaterThanValue, smallerThanValue, or andedWithValue, this object specifies the time (in tenth of seconds, +1 tenth / -0 tenths) for which the samples used for comparison are true prior to the triggering condition becoming true. If the recConfigMode is set to onChange or periodic, the value of this object shall be ignored. The amount of time the condition istrue is measured in tenths of a second. The accuracy of this timer is limited to +1 tenth of a second and:0 tenths of a second. If the trigger is true for at least the time shown in this parameter +1 tenth of a second, the condition shall trigger a recording. It is recognized that some designs only sample the condition periodically, in which case the condition is deemed true for at least the time indicated by this object before the trigger becomes true and the trigger shall always become true if the condition is true for a duration equal to the value shown in this object plus 1 tenth of a second. <Supplanted by> ISO26048-1-CondTrigger.fdCondTriggerValue2 (ISO 26048-1) <Object Identifier> 1.3.6.1.4.1.1206.4.1.1.7.9.7.1.5\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"recConfigEntry",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"deprecated"
],
[
"DESCRIPTION",
"<Definition>If the recConfigMode is set to hysteresisBound, this object specifies the second comparison value for the hysteresis. If the recConfigMode is set to greaterThanValue, smallerThanValue, or andedWithValue, this object specifies the time (in tenth of seconds, +1 tenth / -0 tenths) for which the samples used for comparison are true prior to the triggering condition becoming true. If the recConfigMode is set to onChange or periodic, the value of this object shall be ignored. The amount of time the condition istrue is measured in tenths of a second. The accuracy of this timer is limited to +1 tenth of a second and:0 tenths of a second. If the trigger is true for at least the time shown in this parameter +1 tenth of a second, the condition shall trigger a recording. It is recognized that some designs only sample the condition periodically, in which case the condition is deemed true for at least the time indicated by this object before the trigger becomes true and the trigger shall always become true if the condition is true for a duration equal to the value shown in this object plus 1 tenth of a second. <Supplanted by> ISO26048-1-CondTrigger.fdCondTriggerValue2 (ISO 26048-1) <Object Identifier> 1.3.6.1.4.1.1206.4.1.1.7.9.7.1.5"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}