OID reference

systemSyncControl

1.3.6.1.4.1.1206.4.2.1.4.15

Description

<Definition> This object is used to establish the system reference point for the Called System Pattern by providing the current position in the system pattern cycle (0-254 sec). The device shall recognize a write to this object as a command to establish the time until the next system reference point. Thereafter, the s…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.1206.4.2.1.4 (coord)
Node code
15
Node name
systemSyncControl
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.1206.4.2.1.4.15
URN notation
urn:oid:1.3.6.1.4.1.1206.4.2.1.4.15
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 1206 4 2 1 4 15}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) systemSyncControl(15)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) systemSyncControl(15)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) systemSyncControl(15)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) systemSyncControl(15)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) systemSyncControl(15)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) systemSyncControl(15)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) systemSyncControl(15)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) systemSyncControl(15)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) systemSyncControl(15)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) systemSyncControl(15)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) systemSyncControl(15)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) systemSyncControl(15)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) systemSyncControl(15)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) systemSyncControl(15)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) systemSyncControl(15)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) systemSyncControl(15)}
OID-IRI notation
  • /1/3/6/1/4/1/1206/4/2/1/4/15
  • /ISO/Identified-Organization/6/1/4/1/1206/4/2/1/4/15
  • /ISO/3/6/1/4/1/1206/4/2/1/4/15
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/1206/transportation/devices/asc/coord/systemSyncControl
  • /iso/identified-organization/dod/internet/private/enterprise/nema/transportation/devices/asc/coord/systemSyncControl
  • /iso/identified-organization/dod/internet/private/enterprises/1206/transportation/devices/asc/coord/systemSyncControl
  • /iso/identified-organization/dod/internet/private/enterprises/nema/transportation/devices/asc/coord/systemSyncControl
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/1206/transportation/devices/asc/coord/systemSyncControl
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/nema/transportation/devices/asc/coord/systemSyncControl
  • /iso/identified-organization/dod/internet/private/vendor-objects/1206/transportation/devices/asc/coord/systemSyncControl
  • /iso/identified-organization/dod/internet/private/vendor-objects/nema/transportation/devices/asc/coord/systemSyncControl
  • /iso/org/dod/internet/private/enterprise/1206/transportation/devices/asc/coord/systemSyncControl
  • /iso/org/dod/internet/private/enterprise/nema/transportation/devices/asc/coord/systemSyncControl
  • /iso/org/dod/internet/private/enterprises/1206/transportation/devices/asc/coord/systemSyncControl
  • /iso/org/dod/internet/private/enterprises/nema/transportation/devices/asc/coord/systemSyncControl
  • /iso/org/dod/internet/private/ldap-enterprise/1206/transportation/devices/asc/coord/systemSyncControl
  • /iso/org/dod/internet/private/ldap-enterprise/nema/transportation/devices/asc/coord/systemSyncControl
  • /iso/org/dod/internet/private/vendor-objects/1206/transportation/devices/asc/coord/systemSyncControl
  • /iso/org/dod/internet/private/vendor-objects/nema/transportation/devices/asc/coord/systemSyncControl
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
mandatory, optional

Definitions may combine these properties differently.

Compare 2 source variants

Variant 1 — NTCIP published standard MIB annexes (reviewed modules)

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
mandatory
Allowed ranges
0–255

Variant 2 — NTCIP published standard MIB annexes (reviewed modules)

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
optional
Allowed ranges
0–255

Using this OID with SNMP

At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.

snmpget [connection options] DEVICE .1.3.6.1.4.1.1206.4.2.1.4.15.0

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 4 distinct definitions; some records may not include a definition.

Show 4 published definitions

systemSyncControl · mandatory

systemSyncControl   OBJECT-TYPE
      SYNTAX INTEGER (0..255)
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION "<Definition> This object is used to establish the system
            reference point for the Called System Pattern by providing the
            current position in the system pattern cycle (0-254 sec). The
            device shall recognize a write to this object as a command to
            establish the time until the next system reference point.
            Thereafter, the system reference point shall be assumed to occur
            at a frequency equal to the patternCycleTime.

               When the value in the object is 255, the system REFERENCE point
               shall be referenced to the local Time Base in accordance with its
               programming.

            This CU must maintain an accuracy of 0.1 seconds based on the
            receipt of the SET packet. The device shall reset this object to
            ZERO when in BACKUP Mode. A write to this object shall reset the
            Backup timer to ZERO (see unitBackupTime).
      <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.4.15
      <Unit> second"
::= { coord 15 }

systemSyncControl · mandatory

systemSyncControl OBJECT-TYPE
         SYNTAX INTEGER (0..255)
         ACCESS read-write
         STATUS mandatory
         DESCRIPTION
             "This object is used to set the current System Sync Cycle Timer in the Unit to a Value 0 to
             255. The device shall recognize a write to this object as a command to set the timer equal to
             the value in the object. The Sync Cycle Timer counts up from 0. When the value in the
             object is 255, the System Sync Cycle Timer shall be referenced to the local Time Base in
             accordance with its programming.
             This CU must maintain an accuracy of 0.1 seconds based on the receipt of the SET packet.
             The value of this object is ignored when in BACKUP Mode.
             A write to this object shall reset the BACKUP timer to ZERO."
::= { coord 15 }

systemSyncControl · optional

systemSyncControl   OBJECT-TYPE
   SYNTAX   INTEGER (0..255)
   ACCESS   read-write
   STATUS   optional
   DESCRIPTION
      "<Definition> This object is used to establish the
       system reference point for the Called System Pattern
       by providing the current position in the system
       pattern cycle (0-254 sec). The device shall
       recognize a write to this object as a command to
       establish the time until the next system reference
       point. Thereafter, the system reference point shall
       be assumed to occur at a frequency equal to the
       patternCycleTime.

         When the value in the object is 255, the system
         reference point shall be referenced to the local
         Time Base in accordance with its programming.

       This CU must maintain an accuracy of 0.1 seconds
       based on the receipt of the SET packet.
       The device shall reset this object to ZERO when in
       BACKUP Mode. A write to this object shall reset the
       Backup timer to ZERO (see unitBackupTime).
       <DescriptiveName> NTCIP-1202::ASC.systemSyncControl
       <DataConceptType> Data Element
       <Unit> second"
::= { coord 15 }

systemSyncControl · mandatory

systemSyncControl   OBJECT-TYPE
      SYNTAX INTEGER (0..255)
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION "<Definition> This object is used to establish the system
            reference point for the Called System Pattern by providing the
            current position in the system pattern cycle (0-254 sec). The
            device shall recognize a write to this object as a command to
            establish the time until the next system reference point.
            Thereafter, the system reference point shall be assumed to occur
            at a frequency equal to the patternCycleTime.

                 When the value in the object is 255, the system REFERENCE point
                 shall be referenced to the local Time Base in accordance with its
                 programming.

            This CU must maintain an accuracy of 0.1 seconds based on the
            receipt of the SET packet. The device shall reset this object to
            ZERO when in BACKUP Mode. A write to this object shall reset the
            Backup timer to ZERO (see unitBackupTime).
      <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.4.15
      <Object Type> P
      <Unit> second"
::= { coord 15 }

Meaning

Descriptions

4 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

<Definition> This object is used to establish the system reference point for the Called System Pattern by providing the current position in the system pattern cycle (0-254 sec). The device shall recognize a write to this object as a command to establish the time until the next system reference point. Thereafter, the system reference point shall be assumed to occur at a frequency equal to the patternCycleTime. When the value in the object is 255, the system REFERENCE point shall be referenced to the local Time Base in accordance with its programming. This CU must maintain an accuracy of 0.1 seconds based on the receipt of the SET packet. The device shall reset this object to ZERO when in BACKUP Mode. A write to this object shall reset the Backup timer to ZERO (see unitBackupTime). <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.4.15 <Unit> second

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Description 2

This object is used to set the current System Sync Cycle Timer in the Unit to a Value 0 to 255. The device shall recognize a write to this object as a command to set the timer equal to the value in the object. The Sync Cycle Timer counts up from 0. When the value in the object is 255, the System Sync Cycle Timer shall be referenced to the local Time Base in accordance with its programming. This CU must maintain an accuracy of 0.1 seconds based on the receipt of the SET packet. The value of this object is ignored when in BACKUP Mode. A write to this object shall reset the BACKUP timer to ZERO.

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Description 3

<Definition> This object is used to establish the system reference point for the Called System Pattern by providing the current position in the system pattern cycle (0-254 sec). The device shall recognize a write to this object as a command to establish the time until the next system reference point. Thereafter, the system reference point shall be assumed to occur at a frequency equal to the patternCycleTime. When the value in the object is 255, the system reference point shall be referenced to the local Time Base in accordance with its programming. This CU must maintain an accuracy of 0.1 seconds based on the receipt of the SET packet. The device shall reset this object to ZERO when in BACKUP Mode. A write to this object shall reset the Backup timer to ZERO (see unitBackupTime). <DescriptiveName> NTCIP-1202::ASC.systemSyncControl <DataConceptType> Data Element <Unit> second

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Description 4

<Definition> This object is used to establish the system reference point for the Called System Pattern by providing the current position in the system pattern cycle (0-254 sec). The device shall recognize a write to this object as a command to establish the time until the next system reference point. Thereafter, the system reference point shall be assumed to occur at a frequency equal to the patternCycleTime. When the value in the object is 255, the system REFERENCE point shall be referenced to the local Time Base in accordance with its programming. This CU must maintain an accuracy of 0.1 seconds based on the receipt of the SET packet. The device shall reset this object to ZERO when in BACKUP Mode. A write to this object shall reset the Backup timer to ZERO (see unitBackupTime). <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.4.15 <Object Type> P <Unit> second

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Evidence

Source records

4 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 1

systemSyncControl · mandatoryNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: mandatory.

Names: systemSyncControl

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "systemSyncControl",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition> This object is used to establish the system reference point for the Called System Pattern by providing the current position in the system pattern cycle (0-254 sec). The device shall recognize a write to this object as a command to establish the time until the next system reference point. Thereafter, the system reference point shall be assumed to occur at a frequency equal to the patternCycleTime. When the value in the object is 255, the system REFERENCE point shall be referenced to the local Time Base in accordance with its programming. This CU must maintain an accuracy of 0.1 seconds based on the receipt of the SET packet. The device shall reset this object to ZERO when in BACKUP Mode. A write to this object shall reset the Backup timer to ZERO (see unitBackupTime). <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.4.15 <Unit> second\"",
    "::=",
    "{",
    "coord",
    "15",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition> This object is used to establish the system reference point for the Called System Pattern by providing the current position in the system pattern cycle (0-254 sec). The device shall recognize a write to this object as a command to establish the time until the next system reference point. Thereafter, the system reference point shall be assumed to occur at a frequency equal to the patternCycleTime. When the value in the object is 255, the system REFERENCE point shall be referenced to the local Time Base in accordance with its programming. This CU must maintain an accuracy of 0.1 seconds based on the receipt of the SET packet. The device shall reset this object to ZERO when in BACKUP Mode. A write to this object shall reset the Backup timer to ZERO (see unitBackupTime). <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.4.15 <Unit> second"
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 2NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 2

systemSyncControl · mandatoryNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: mandatory.

Names: systemSyncControl

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "systemSyncControl",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"This object is used to set the current System Sync Cycle Timer in the Unit to a Value 0 to 255. The device shall recognize a write to this object as a command to set the timer equal to the value in the object. The Sync Cycle Timer counts up from 0. When the value in the object is 255, the System Sync Cycle Timer shall be referenced to the local Time Base in accordance with its programming. This CU must maintain an accuracy of 0.1 seconds based on the receipt of the SET packet. The value of this object is ignored when in BACKUP Mode. A write to this object shall reset the BACKUP timer to ZERO.\"",
    "::=",
    "{",
    "coord",
    "15",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "This object is used to set the current System Sync Cycle Timer in the Unit to a Value 0 to 255. The device shall recognize a write to this object as a command to set the timer equal to the value in the object. The Sync Cycle Timer counts up from 0. When the value in the object is 255, the System Sync Cycle Timer shall be referenced to the local Time Base in accordance with its programming. This CU must maintain an accuracy of 0.1 seconds based on the receipt of the SET packet. The value of this object is ignored when in BACKUP Mode. A write to this object shall reset the BACKUP timer to ZERO."
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 3NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 3

systemSyncControl · optionalNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: optional.

Names: systemSyncControl

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "systemSyncControl",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "ACCESS",
    "read-write",
    "STATUS",
    "optional",
    "DESCRIPTION",
    "\"<Definition> This object is used to establish the system reference point for the Called System Pattern by providing the current position in the system pattern cycle (0-254 sec). The device shall recognize a write to this object as a command to establish the time until the next system reference point. Thereafter, the system reference point shall be assumed to occur at a frequency equal to the patternCycleTime. When the value in the object is 255, the system reference point shall be referenced to the local Time Base in accordance with its programming. This CU must maintain an accuracy of 0.1 seconds based on the receipt of the SET packet. The device shall reset this object to ZERO when in BACKUP Mode. A write to this object shall reset the Backup timer to ZERO (see unitBackupTime). <DescriptiveName> NTCIP-1202::ASC.systemSyncControl <DataConceptType> Data Element <Unit> second\"",
    "::=",
    "{",
    "coord",
    "15",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "optional"
    ],
    [
      "DESCRIPTION",
      "<Definition> This object is used to establish the system reference point for the Called System Pattern by providing the current position in the system pattern cycle (0-254 sec). The device shall recognize a write to this object as a command to establish the time until the next system reference point. Thereafter, the system reference point shall be assumed to occur at a frequency equal to the patternCycleTime. When the value in the object is 255, the system reference point shall be referenced to the local Time Base in accordance with its programming. This CU must maintain an accuracy of 0.1 seconds based on the receipt of the SET packet. The device shall reset this object to ZERO when in BACKUP Mode. A write to this object shall reset the Backup timer to ZERO (see unitBackupTime). <DescriptiveName> NTCIP-1202::ASC.systemSyncControl <DataConceptType> Data Element <Unit> second"
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 4NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 4

systemSyncControl · mandatoryNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: mandatory.

Names: systemSyncControl

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "systemSyncControl",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "255",
    ")",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition> This object is used to establish the system reference point for the Called System Pattern by providing the current position in the system pattern cycle (0-254 sec). The device shall recognize a write to this object as a command to establish the time until the next system reference point. Thereafter, the system reference point shall be assumed to occur at a frequency equal to the patternCycleTime. When the value in the object is 255, the system REFERENCE point shall be referenced to the local Time Base in accordance with its programming. This CU must maintain an accuracy of 0.1 seconds based on the receipt of the SET packet. The device shall reset this object to ZERO when in BACKUP Mode. A write to this object shall reset the Backup timer to ZERO (see unitBackupTime). <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.4.15 <Object Type> P <Unit> second\"",
    "::=",
    "{",
    "coord",
    "15",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition> This object is used to establish the system reference point for the Called System Pattern by providing the current position in the system pattern cycle (0-254 sec). The device shall recognize a write to this object as a command to establish the time until the next system reference point. Thereafter, the system reference point shall be assumed to occur at a frequency equal to the patternCycleTime. When the value in the object is 255, the system REFERENCE point shall be referenced to the local Time Base in accordance with its programming. This CU must maintain an accuracy of 0.1 seconds based on the receipt of the SET packet. The device shall reset this object to ZERO when in BACKUP Mode. A write to this object shall reset the Backup timer to ZERO (see unitBackupTime). <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.4.15 <Object Type> P <Unit> second"
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.1206)

Schopp Bruce J.

Siblings (15)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.1206.4.2.1.4.1 coordOperationalMode00
1.3.6.1.4.1.1206.4.2.1.4.2 coordCorrectionMode00
1.3.6.1.4.1.1206.4.2.1.4.3 coordMaximumMode00
1.3.6.1.4.1.1206.4.2.1.4.4 coordForceMode00
1.3.6.1.4.1.1206.4.2.1.4.5 maxPatterns00
1.3.6.1.4.1.1206.4.2.1.4.6 patternTableType00
1.3.6.1.4.1.1206.4.2.1.4.7 patternTable19
1.3.6.1.4.1.1206.4.2.1.4.8 maxSplits00
1.3.6.1.4.1.1206.4.2.1.4.9 splitTable17
1.3.6.1.4.1.1206.4.2.1.4.10 coordPatternStatus00
1.3.6.1.4.1.1206.4.2.1.4.11 localFreeStatus00
1.3.6.1.4.1.1206.4.2.1.4.12 coordCycleStatus00
1.3.6.1.4.1.1206.4.2.1.4.13 coordSyncStatus00
1.3.6.1.4.1.1206.4.2.1.4.14 systemPatternControl00
1.3.6.1.4.1.1206.4.2.1.4.16 unitCoordSyncPoint00