Available source records contain 4 distinct definitions; some records may not include a definition.
Show 4 published definitions
patternTableType · optional
patternTableType OBJECT-TYPE
SYNTAX INTEGER { other (1),
patterns (2),
offset3 (3),
offset5 (4) }
ACCESS read-only
STATUS optional
DESCRIPTION
"<Definition> This object provides information about
any special organizational structure required for
the pattern table. The defined structures are as
follows:
other: The pattern table setup is not described
in this standard, refer to device manual.
patterns: Each row of the pattern table
represents a unique pattern and has no
dependencies on other rows.
offset3: The pattern table is organized into
plans which have three offsets. Each plan
uses three consecutive rows. Only
patternOffsetTime and patternSequenceNumber
values may vary between each of the three rows.
Plan 1 is contained in rows 1, 2 and 3, Plan 2
is contained in rows 4, 5 and 6, Plan 3 is in
rows 7, 8 and 9, etc.
offset5: The pattern table is organized into
plans which have five offsets. Each plan
occupies five consecutive rows. Only
patternOffsetTime and patternSequenceNumber
values may vary between each of the rows.
Plan 1 is contained in rows 1, 2, 3, 4 and
5, Plan 2 is contained in rows 6, 7, 8, 9 and
10, Plan 3 is contained in rows 11, 12, 13, 14
and 15, etc.
<DescriptiveName> NTCIP-1202::ASC.patternTableType
<DataConceptType> Data Element"
REFERENCE
"NEMA TS 2 Clause 3.6.2.1 and 3.6.2.2"
::= { coord 6 }patternTableType · mandatory
patternTableType OBJECT-TYPE
SYNTAX INTEGER { other (1),
patterns (2),
offset3 (3),
offset5 (4) }
ACCESS read-only
STATUS mandatory
DESCRIPTION "<Definition> This object provides information about any
special organizational structure required for the pattern table.
The defined structures are as follows:
other: The pattern table setup is not described in this standard,
refer to device manual.
patterns: Each row of the pattern table represents a unique
pattern and has no dependencies on other rows.
offset3: The pattern table is organized into plans which have
three offsets. Each plan uses three consecutive rows. Only
patternOffsetTime and patternSequenceNumber values may vary
between each of the three rows. Plan 1 is contained in rows 1, 2
and 3, Plan 2 is contained in rows 4, 5 and 6, Plan 3 is in rows
7, 8 and 9, etc.
offset5: The pattern table is organized into plans which have
five offsets. Each plan occupies five consecutive rows. Only
patternOffsetTime and patternSequenceNumber values may vary
between each of the rows. Plan 1 is contained in rows 1, 2, 3, 4
and 5, Plan 2 is contained in rows 6, 7, 8, 9 and 10, Plan 3 is
contained in rows 11, 12, 13, 14 and 15, etc.
<Object Identifier> 1.3.6.1.4.1.1206.4.2.1.4.6"
REFERENCE "NEMA TS 2 Clause 3.6.2.1 and 3.6.2.2"
::= { coord 6 }patternTableType · mandatory
patternTableType OBJECT-TYPE
SYNTAX INTEGER { other (1),
patterns (2),
offset3 (3),
offset5 (4) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object provides information about any special organizational structure required for the
pattern table. The defined structures are as follows:
other - The pattern table setup is not described in this standard, refer to device
manual.
patterns - Each row of the pattern table represents a unique pattern and has no
dependencies on other rows.
offset3 - The pattern table is organized into plans which have three offsets. Each plan
uses three consecutive rows. Only the offsetTime value may vary between
each of the three rows. Plan 1 is contained in rows 1, 2 and 3, Plan 2 is
contained in rows 4, 5 and 6, Plan 3 is in rows 7, 8 and 9, etc..
offset5 - The pattern table is organized into plans which have five offsets. Each plan
occupies five consecutive rows. Only the offsetTime value may vary between
each of the rows. Plan 1 is contained in rows 1, 2, 3, 4 and 5, Plan 2 is
contained in rows , 6,7, 8, 9 and 10, Plan 3 is contained in rows 11, 12, 13, 14
and 15, etc..."
REFERENCE
"NEMA TS 2 Clause 3.6.2.1 and 3.6.2.2"
::= { coord 6 }patternTableType · mandatory
patternTableType OBJECT-TYPE
SYNTAX INTEGER { other (1),
patterns (2),
offset3 (3),
offset5 (4) }
ACCESS read-only
STATUS mandatory
DESCRIPTION "<Definition> This object provides information about any
special organizational structure required for the pattern table.
The defined structures are as follows:
other: The pattern table setup is not described in this standard,
refer to device manual.
patterns: Each row of the pattern table represents a unique
pattern and has no dependencies on other rows.
offset3: The pattern table is organized into plans which have
three offsets. Each plan uses three consecutive rows. Only
patternOffsetTime and patternSequenceNumber values may vary
between each of the three rows. Plan 1 is contained in rows 1, 2
and 3, Plan 2 is contained in rows 4, 5 and 6, Plan 3 is in rows
7, 8 and 9, etc.
offset5: The pattern table is organized into plans which have
five offsets. Each plan occupies five consecutive rows. Only
patternOffsetTime and patternSequenceNumber values may vary
between each of the rows. Plan 1 is contained in rows 1, 2, 3, 4
and 5, Plan 2 is contained in rows 6, 7, 8, 9 and 10, Plan 3 is
contained in rows 11, 12, 13, 14 and 15, etc.
<Object Identifier> 1.3.6.1.4.1.1206.4.2.1.4.6
<Object Type> S"
REFERENCE "NEMA TS 2 Clause 3.6.2.1 and 3.6.2.2"
::= { coord 6 }