OID reference

coordCorrectionMode

1.3.6.1.4.1.1206.4.2.1.4.2

Description

Full description and source information

Identification

Identifier and names

Parent: 1.3.6.1.4.1.1206.4.2.1.4 (coord)
Node code: 2
Node name: coordCorrectionMode
Category: SNMP management object
Numeric OID: 1.3.6.1.4.1.1206.4.2.1.4.2
URN notation: urn:oid:1.3.6.1.4.1.1206.4.2.1.4.2

ASN.1, OID-IRI and named path variants

ASN.1 notation

{1 3 6 1 4 1 1206 4 2 1 4 2}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) coordCorrectionMode(2)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) coordCorrectionMode(2)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) coordCorrectionMode(2)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) coordCorrectionMode(2)}
{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) coordCorrectionMode(2)}
{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) coordCorrectionMode(2)}
{iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) coordCorrectionMode(2)}
{iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) coordCorrectionMode(2)}
{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) coordCorrectionMode(2)}
{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) coordCorrectionMode(2)}
{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) coordCorrectionMode(2)}
{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) coordCorrectionMode(2)}
{iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) coordCorrectionMode(2)}
{iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) coordCorrectionMode(2)}
{iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) coordCorrectionMode(2)}
{iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) asc(1) coord(4) coordCorrectionMode(2)}

OID-IRI notation

/1/3/6/1/4/1/1206/4/2/1/4/2
/ISO/Identified-Organization/6/1/4/1/1206/4/2/1/4/2
/ISO/3/6/1/4/1/1206/4/2/1/4/2

Named path variants

/iso/identified-organization/dod/internet/private/enterprise/1206/transportation/devices/asc/coord/coordCorrectionMode
/iso/identified-organization/dod/internet/private/enterprise/nema/transportation/devices/asc/coord/coordCorrectionMode
/iso/identified-organization/dod/internet/private/enterprises/1206/transportation/devices/asc/coord/coordCorrectionMode
/iso/identified-organization/dod/internet/private/enterprises/nema/transportation/devices/asc/coord/coordCorrectionMode
/iso/identified-organization/dod/internet/private/ldap-enterprise/1206/transportation/devices/asc/coord/coordCorrectionMode
/iso/identified-organization/dod/internet/private/ldap-enterprise/nema/transportation/devices/asc/coord/coordCorrectionMode
/iso/identified-organization/dod/internet/private/vendor-objects/1206/transportation/devices/asc/coord/coordCorrectionMode
/iso/identified-organization/dod/internet/private/vendor-objects/nema/transportation/devices/asc/coord/coordCorrectionMode
/iso/org/dod/internet/private/enterprise/1206/transportation/devices/asc/coord/coordCorrectionMode
/iso/org/dod/internet/private/enterprise/nema/transportation/devices/asc/coord/coordCorrectionMode
/iso/org/dod/internet/private/enterprises/1206/transportation/devices/asc/coord/coordCorrectionMode
/iso/org/dod/internet/private/enterprises/nema/transportation/devices/asc/coord/coordCorrectionMode
/iso/org/dod/internet/private/ldap-enterprise/1206/transportation/devices/asc/coord/coordCorrectionMode
/iso/org/dod/internet/private/ldap-enterprise/nema/transportation/devices/asc/coord/coordCorrectionMode
/iso/org/dod/internet/private/vendor-objects/1206/transportation/devices/asc/coord/coordCorrectionMode
/iso/org/dod/internet/private/vendor-objects/nema/transportation/devices/asc/coord/coordCorrectionMode
Additional combinations skipped.

SNMP properties

Value type: INTEGER
Maximum access defined by MIB: read-write
Status in MIB: mandatory, optional

Definitions may combine these properties differently.

Compare 3 source variants

Variant 1 — NTCIP published standard MIB annexes (reviewed modules)

Value type: INTEGER
Maximum access defined by MIB: read-write
Status in MIB: mandatory

Variant 2 — NTCIP published standard MIB annexes (reviewed modules)

Value type: INTEGER
Maximum access defined by MIB: read-write
Status in MIB: mandatory

Variant 3 — NTCIP published standard MIB annexes (reviewed modules)

Value type: INTEGER
Maximum access defined by MIB: read-write
Status in MIB: optional

Enumerated values

Numbers refer to source variants above. Each value is shown only for variants that define it.

Value	Name	Source variants
1	other	1, 2, 3
2	dwell	1, 2, 3
3	shortway	1, 2, 3
4	addOnly	1, 2, 3
5	subtractOnly	1

Using this OID with SNMP

At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.

snmpget [connection options] DEVICE .1.3.6.1.4.1.1206.4.2.1.4.2.0

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Published definitions

Available source records contain 4 distinct definitions; some records may not include a definition.

Show 4 published definitions

coordCorrectionMode · mandatory

coordCorrectionMode   OBJECT-TYPE
      SYNTAX INTEGER { other (1),
            dwell (2),
            shortway (3),
            addOnly (4),
            subtractOnly (5) }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION "<Definition> This object defines the Coord Correction
            Mode. The possible modes are:
            other: the coordinator establishes a new offset by a mechanism
            not defined in this standard.
            dwell: when changing offset, the coordinator shall establish a
            new offset by dwelling in the coord phase(s) until the desired
            offset is reached.
            shortway (Smooth): when changing offset, the coordinator shall
            establish a new offset by adding or subtracting to/from the
            timings in a manner that limits the cycle change. This operation
            is performed in a device specific manner.
            addOnly: when changing offset, the coordinator shall establish a
            new offset by adding to the timings in a manner that limits the
            cycle change. This operation is performed in a device specific
            manner.
            subtractOnly: when changing offset, the coordinator shall
            establish a new offset by subtracting from the timings in a
            manner that limits the cycle change. This operation is performed
            in a device specific manner.
      <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.4.2"
::= { coord 2 }

coordCorrectionMode · mandatory

coordCorrectionMode OBJECT-TYPE

        SYNTAX INTEGER { other (1),
                               dwell (2),
                               shortway (3),
                               addOnly (4) }
        ACCESS read-write
        STATUS mandatory
        DESCRIPTION
           "This object defines the Coord Correction Mode. The possible modes are:
              other; the coordinator establishes a new offset by a mechanism not defined in this
                       standard.

TS 3.5-1996
       

                  dwell; when changing offset, the coordinator shall establish a new offset by dwelling in
                          the coord phase(s) until the desired offset is reached.
                  shortway (Smooth); when changing offset, the coordinator shall establish a new offset by
                          adding or subtracting to/from the timings in a manner that limits the cycle
                          change. This operation is performed in a device specific manner.
                  addOnly; when changing offset, the coordinator shall establish a new offset by adding to
                          the timings in a manner that limits the cycle change. This operation is performed
                          in a device specific manner."
::= { coord 2 }

coordCorrectionMode · mandatory

coordCorrectionMode   OBJECT-TYPE
      SYNTAX INTEGER { other (1),
            dwell (2),
            shortway (3),
            addOnly (4),
            subtractOnly (5) }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION "<Definition> This object defines the Coord Correction
            Mode. The possible modes are:
            other: the coordinator establishes a new offset by a mechanism
            not defined in this standard.
            dwell: when changing offset, the coordinator shall establish a
            new offset by dwelling in the coord phase(s) until the desired
            offset is reached.
            shortway (Smooth): when changing offset, the coordinator shall
            establish a new offset by adding or subtracting to/from the
            timings in a manner that limits the cycle change. This operation
            is performed in a device specific manner.
            addOnly: when changing offset, the coordinator shall establish a
            new offset by adding to the timings in a manner that limits the
            cycle change. This operation is performed in a device specific
            manner.
            subtractOnly: when changing offset, the coordinator shall
            establish a new offset by subtracting from the timings in a
            manner that limits the cycle change. This operation is performed
            in a device specific manner.
      <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.4.2
      <Object Type> P"
::= { coord 2 }

coordCorrectionMode · optional

coordCorrectionMode   OBJECT-TYPE
   SYNTAX   INTEGER { other (1),
                      dwell (2),
                      shortway (3),
                      addOnly (4) }
   ACCESS   read-write
   STATUS   optional
   DESCRIPTION
      "<Definition> This object defines the Coord Correction
       Mode. The possible modes are:
         other: the coordinator establishes a new offset by
            a mechanism not defined in this standard.
         dwell: when changing offset, the coordinator shall
            establish a new offset by dwelling in the coord
            phase(s) until the desired offset is reached.




                                                                                        

                      
       

         shortway (Smooth): when changing offset, the
            coordinator shall establish a new offset by
            adding or subtracting to/from the timings in a
            manner that limits the cycle change. This
            operation is performed in a device specific
            manner.
         addOnly: when changing offset, the coordinator
            shall establish a new offset by adding to the
            timings in a manner that limits the cycle
            change. This operation is performed in a device
            specific manner.
       <DescriptiveName> NTCIP-1202::ASC.coordCorrectionMode
       <DataConceptType> Data Element"
::= { coord 2 }

Meaning

Descriptions

4 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

<Definition> This object defines the Coord Correction Mode. The possible modes are: other: the coordinator establishes a new offset by a mechanism not defined in this standard. dwell: when changing offset, the coordinator shall establish a new offset by dwelling in the coord phase(s) until the desired offset is reached. shortway (Smooth): when changing offset, the coordinator shall establish a new offset by adding or subtracting to/from the timings in a manner that limits the cycle change. This operation is performed in a device specific manner. addOnly: when changing offset, the coordinator shall establish a new offset by adding to the timings in a manner that limits the cycle change. This operation is performed in a device specific manner. subtractOnly: when changing offset, the coordinator shall establish a new offset by subtracting from the timings in a manner that limits the cycle change. This operation is performed in a device specific manner. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.4.2

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Description 2

This object defines the Coord Correction Mode. The possible modes are: other; the coordinator establishes a new offset by a mechanism not defined in this standard. TS 3.5-1996 dwell; when changing offset, the coordinator shall establish a new offset by dwelling in the coord phase(s) until the desired offset is reached. shortway (Smooth); when changing offset, the coordinator shall establish a new offset by adding or subtracting to/from the timings in a manner that limits the cycle change. This operation is performed in a device specific manner. addOnly; when changing offset, the coordinator shall establish a new offset by adding to the timings in a manner that limits the cycle change. This operation is performed in a device specific manner.

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Description 3

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Description 4

<Definition> This object defines the Coord Correction Mode. The possible modes are: other: the coordinator establishes a new offset by a mechanism not defined in this standard. dwell: when changing offset, the coordinator shall establish a new offset by dwelling in the coord phase(s) until the desired offset is reached. shortway (Smooth): when changing offset, the coordinator shall establish a new offset by adding or subtracting to/from the timings in a manner that limits the cycle change. This operation is performed in a device specific manner. addOnly: when changing offset, the coordinator shall establish a new offset by adding to the timings in a manner that limits the cycle change. This operation is performed in a device specific manner. <DescriptiveName> NTCIP-1202::ASC.coordCorrectionMode <DataConceptType> Data Element

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Evidence

Source records

4 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 1

coordCorrectionMode · mandatoryNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: mandatory.

Names: coordCorrectionMode

Technical details

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "coordCorrectionMode",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "dwell",
    "(",
    "2",
    ")",
    ",",
    "shortway",
    "(",
    "3",
    ")",
    ",",
    "addOnly",
    "(",
    "4",
    ")",
    ",",
    "subtractOnly",
    "(",
    "5",
    ")",
    "}",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition> This object defines the Coord Correction Mode. The possible modes are: other: the coordinator establishes a new offset by a mechanism not defined in this standard. dwell: when changing offset, the coordinator shall establish a new offset by dwelling in the coord phase(s) until the desired offset is reached. shortway (Smooth): when changing offset, the coordinator shall establish a new offset by adding or subtracting to/from the timings in a manner that limits the cycle change. This operation is performed in a device specific manner. addOnly: when changing offset, the coordinator shall establish a new offset by adding to the timings in a manner that limits the cycle change. This operation is performed in a device specific manner. subtractOnly: when changing offset, the coordinator shall establish a new offset by subtracting from the timings in a manner that limits the cycle change. This operation is performed in a device specific manner. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.4.2\"",
    "::=",
    "{",
    "coord",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "dwell",
            2
          ],
          [
            "shortway",
            3
          ],
          [
            "addOnly",
            4
          ],
          [
            "subtractOnly",
            5
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition> This object defines the Coord Correction Mode. The possible modes are: other: the coordinator establishes a new offset by a mechanism not defined in this standard. dwell: when changing offset, the coordinator shall establish a new offset by dwelling in the coord phase(s) until the desired offset is reached. shortway (Smooth): when changing offset, the coordinator shall establish a new offset by adding or subtracting to/from the timings in a manner that limits the cycle change. This operation is performed in a device specific manner. addOnly: when changing offset, the coordinator shall establish a new offset by adding to the timings in a manner that limits the cycle change. This operation is performed in a device specific manner. subtractOnly: when changing offset, the coordinator shall establish a new offset by subtracting from the timings in a manner that limits the cycle change. This operation is performed in a device specific manner. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.4.2"
    ],
    null,
    null,
    null,
    null
  ]
}

NTCIP published standard MIB annexes (reviewed modules) · Publisher's source file: NTCIP 1202 v03A, Object Definitions for Actuated Signal Controllers (ASC) Interface Published May 2019 — original PDF · Official record
Module: NTCIP1202-v03

See published definition above
Module imports
```
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['IpAddress', 'Counter', 'null'], 'RFC1213-MIB': ['DisplayString', 'ifIndex'], 'NTCIP8004v02': ['OwnerString', 'OerString', 'devices']}
```
Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004v02. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP-1202v0328A.pdf — NTCIP1202-v03 (MIB transcription)
Related source files and packages:
Show more related files and packages
- NTCIP8004-NEMA.mib — ITE namespace dependency
- NTCIP8004-Transportation.mib — ITE namespace dependency

Records for description 2NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 2

coordCorrectionMode · mandatoryNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: mandatory.

Names: coordCorrectionMode

Technical details

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "coordCorrectionMode",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "dwell",
    "(",
    "2",
    ")",
    ",",
    "shortway",
    "(",
    "3",
    ")",
    ",",
    "addOnly",
    "(",
    "4",
    ")",
    "}",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"This object defines the Coord Correction Mode. The possible modes are: other; the coordinator establishes a new offset by a mechanism not defined in this standard. TS 3.5-1996 dwell; when changing offset, the coordinator shall establish a new offset by dwelling in the coord phase(s) until the desired offset is reached. shortway (Smooth); when changing offset, the coordinator shall establish a new offset by adding or subtracting to/from the timings in a manner that limits the cycle change. This operation is performed in a device specific manner. addOnly; when changing offset, the coordinator shall establish a new offset by adding to the timings in a manner that limits the cycle change. This operation is performed in a device specific manner.\"",
    "::=",
    "{",
    "coord",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "dwell",
            2
          ],
          [
            "shortway",
            3
          ],
          [
            "addOnly",
            4
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "This object defines the Coord Correction Mode. The possible modes are: other; the coordinator establishes a new offset by a mechanism not defined in this standard. TS 3.5-1996 dwell; when changing offset, the coordinator shall establish a new offset by dwelling in the coord phase(s) until the desired offset is reached. shortway (Smooth); when changing offset, the coordinator shall establish a new offset by adding or subtracting to/from the timings in a manner that limits the cycle change. This operation is performed in a device specific manner. addOnly; when changing offset, the coordinator shall establish a new offset by adding to the timings in a manner that limits the cycle change. This operation is performed in a device specific manner."
    ],
    null,
    null,
    null,
    null
  ]
}

NTCIP published standard MIB annexes (reviewed modules) · Publisher's source file: NTCIP 1202 v01, Object Definitions for Actuated Traffic Signal Controller (ASC) Units) Published January 2005 (superceded by NTCIP 1202 v02) — original PDF · Official record
Module: ASC_MIB1

See published definition above
Module imports
```
{'TMIB': ['devices']}
```
Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: TMIB. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP1202v0107d.pdf — ASC_MIB1 (MIB transcription)
Related source files and packages:
- NTCIP 1202 v01, Object Definitions for Actuated Traffic Signal Controller (ASC) Units) Published January 2005 (superceded by NTCIP 1202 v02) — original PDF

Records for description 3NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 3

coordCorrectionMode · mandatoryNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: mandatory.

Names: coordCorrectionMode

Technical details

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "coordCorrectionMode",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "dwell",
    "(",
    "2",
    ")",
    ",",
    "shortway",
    "(",
    "3",
    ")",
    ",",
    "addOnly",
    "(",
    "4",
    ")",
    ",",
    "subtractOnly",
    "(",
    "5",
    ")",
    "}",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition> This object defines the Coord Correction Mode. The possible modes are: other: the coordinator establishes a new offset by a mechanism not defined in this standard. dwell: when changing offset, the coordinator shall establish a new offset by dwelling in the coord phase(s) until the desired offset is reached. shortway (Smooth): when changing offset, the coordinator shall establish a new offset by adding or subtracting to/from the timings in a manner that limits the cycle change. This operation is performed in a device specific manner. addOnly: when changing offset, the coordinator shall establish a new offset by adding to the timings in a manner that limits the cycle change. This operation is performed in a device specific manner. subtractOnly: when changing offset, the coordinator shall establish a new offset by subtracting from the timings in a manner that limits the cycle change. This operation is performed in a device specific manner. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.4.2 <Object Type> P\"",
    "::=",
    "{",
    "coord",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "dwell",
            2
          ],
          [
            "shortway",
            3
          ],
          [
            "addOnly",
            4
          ],
          [
            "subtractOnly",
            5
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition> This object defines the Coord Correction Mode. The possible modes are: other: the coordinator establishes a new offset by a mechanism not defined in this standard. dwell: when changing offset, the coordinator shall establish a new offset by dwelling in the coord phase(s) until the desired offset is reached. shortway (Smooth): when changing offset, the coordinator shall establish a new offset by adding or subtracting to/from the timings in a manner that limits the cycle change. This operation is performed in a device specific manner. addOnly: when changing offset, the coordinator shall establish a new offset by adding to the timings in a manner that limits the cycle change. This operation is performed in a device specific manner. subtractOnly: when changing offset, the coordinator shall establish a new offset by subtracting from the timings in a manner that limits the cycle change. This operation is performed in a device specific manner. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.4.2 <Object Type> P"
    ],
    null,
    null,
    null,
    null
  ]
}

NTCIP published standard MIB annexes (reviewed modules) · Publisher's source file: NTCIP 1202 v03b NTCIP 1202 v02, Object Definitions for Actuated Traffic Signal Controller (ASC) Units – version 03b Published October 2023 — original PDF · Official record
Module: NTCIP1202-v03

See published definition above
Module imports
```
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['IpAddress', 'Counter', 'null'], 'RFC1213-MIB': ['DisplayString', 'ifIndex'], 'NTCIP8004v02': ['OwnerString', 'OerString', 'devices']}
```
Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004v02. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP-1202v03.35e-aspublished.pdf — NTCIP1202-v03 (MIB transcription)
Related source files and packages:
- NTCIP 1202 v03b NTCIP 1202 v02, Object Definitions for Actuated Traffic Signal Controller (ASC) Units – version 03b Published October 2023 — original PDF

Records for description 4NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 4

coordCorrectionMode · optionalNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: optional.

Names: coordCorrectionMode

Technical details

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "coordCorrectionMode",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "dwell",
    "(",
    "2",
    ")",
    ",",
    "shortway",
    "(",
    "3",
    ")",
    ",",
    "addOnly",
    "(",
    "4",
    ")",
    "}",
    "ACCESS",
    "read-write",
    "STATUS",
    "optional",
    "DESCRIPTION",
    "\"<Definition> This object defines the Coord Correction Mode. The possible modes are: other: the coordinator establishes a new offset by a mechanism not defined in this standard. dwell: when changing offset, the coordinator shall establish a new offset by dwelling in the coord phase(s) until the desired offset is reached. shortway (Smooth): when changing offset, the coordinator shall establish a new offset by adding or subtracting to/from the timings in a manner that limits the cycle change. This operation is performed in a device specific manner. addOnly: when changing offset, the coordinator shall establish a new offset by adding to the timings in a manner that limits the cycle change. This operation is performed in a device specific manner. <DescriptiveName> NTCIP-1202::ASC.coordCorrectionMode <DataConceptType> Data Element\"",
    "::=",
    "{",
    "coord",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "dwell",
            2
          ],
          [
            "shortway",
            3
          ],
          [
            "addOnly",
            4
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "optional"
    ],
    [
      "DESCRIPTION",
      "<Definition> This object defines the Coord Correction Mode. The possible modes are: other: the coordinator establishes a new offset by a mechanism not defined in this standard. dwell: when changing offset, the coordinator shall establish a new offset by dwelling in the coord phase(s) until the desired offset is reached. shortway (Smooth): when changing offset, the coordinator shall establish a new offset by adding or subtracting to/from the timings in a manner that limits the cycle change. This operation is performed in a device specific manner. addOnly: when changing offset, the coordinator shall establish a new offset by adding to the timings in a manner that limits the cycle change. This operation is performed in a device specific manner. <DescriptiveName> NTCIP-1202::ASC.coordCorrectionMode <DataConceptType> Data Element"
    ],
    null,
    null,
    null,
    null
  ]
}

NTCIP published standard MIB annexes (reviewed modules) · Publisher's source file: NTCIP 1202 v02, Object Definitions for Actuated Traffic Signal Controller (ASC) Units – version 02 Published November 2005 — original PDF · Official record
Module: NTCIP1202-200x

See published definition above
Module imports
```
{'TMIB-II': ['OwnerString', 'devices'], 'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['Counter']}
```
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: TMIB-II. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP1202v0219f.pdf — NTCIP1202-200x (MIB transcription)
Related source files and packages:
- NTCIP 1202 v02, Object Definitions for Actuated Traffic Signal Controller (ASC) Units – version 02 Published November 2005 — original PDF

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.1206)

Schopp Bruce J.

Siblings (15)

OID	Name	Direct children	Descendants
1.3.6.1.4.1.1206.4.2.1.4.1	coordOperationalMode	0	0
1.3.6.1.4.1.1206.4.2.1.4.3	coordMaximumMode	0	0
1.3.6.1.4.1.1206.4.2.1.4.4	coordForceMode	0	0
1.3.6.1.4.1.1206.4.2.1.4.5	maxPatterns	0	0
1.3.6.1.4.1.1206.4.2.1.4.6	patternTableType	0	0
1.3.6.1.4.1.1206.4.2.1.4.7	patternTable	1	9
1.3.6.1.4.1.1206.4.2.1.4.8	maxSplits	0	0
1.3.6.1.4.1.1206.4.2.1.4.9	splitTable	1	7
1.3.6.1.4.1.1206.4.2.1.4.10	coordPatternStatus	0	0
1.3.6.1.4.1.1206.4.2.1.4.11	localFreeStatus	0	0
1.3.6.1.4.1.1206.4.2.1.4.12	coordCycleStatus	0	0
1.3.6.1.4.1.1206.4.2.1.4.13	coordSyncStatus	0	0
1.3.6.1.4.1.1206.4.2.1.4.14	systemPatternControl	0	0
1.3.6.1.4.1.1206.4.2.1.4.15	systemSyncControl	0	0
1.3.6.1.4.1.1206.4.2.1.4.16	unitCoordSyncPoint	0	0