Recorded announcement requested is no longer available in the
system.
Parsed from file Excel.MIB.txt
Company: None
Module: EXCEL-SWITCH-MIB
Recorded announcement requested is no longer available in the
system.
Parsed from file EXCEL-SWITCH-MIB.mib
Module: EXCEL-SWITCH-MIB
Vendor: Lucent Technologies
Module: EXCEL-SWITCH-MIB
[Automatically extracted from oidview.com]
excelRANUnAvailableTrap NOTIFICATION-TYPE OBJECTS {excelSysLastAlarmNode , excelSysLastAlarmSeverity } STATUS current DESCRIPTION "Recorded announcement requested is no longer available in the system." ::= { excelTraps 15 }
excelRANUnAvailableTrap NOTIFICATION-TYPE OBJECTS {excelSysLastAlarmNode , excelSysLastAlarmSeverity } STATUS current DESCRIPTION "Recorded announcement requested is no longer available in the system." ::= { excelTraps 15 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.1751.1.67.0.1 | excelCardUpTrap | 0 | 0 | This trap is sent when a card is recognized by the matrix for the first time. |
| 1.3.6.1.4.1.1751.1.67.0.2 | excelCardDownTrap | 0 | 0 | This trap is sent when a card goes out of service, is removed or for some reason is no longer recognized by the matrix. |
| 1.3.6.1.4.1.1751.1.67.0.3 | excelCardActiveTrap | 0 | 0 | This trap is sent after a switchover has occured from the standby to active card. excelDeviceCardSlotIndex will indicate the slo… |
| 1.3.6.1.4.1.1751.1.67.0.4 | excelFaultLoggedTrap | 0 | 0 | This trap is sent when a fault has occurred on a card. The slot number of the card on which a fault occurred is bound to the trap. |
| 1.3.6.1.4.1.1751.1.67.0.5 | excelRingUpTrap | 0 | 0 | This trap is sent when an Exnet ring comes up. |
| 1.3.6.1.4.1.1751.1.67.0.6 | excelRingDownTrap | 0 | 0 | This trap is sent when an Exnet ring goes down. |
| 1.3.6.1.4.1.1751.1.67.0.7 | excelSystemBusyTrap | 0 | 0 | If the system is in a Busy Condition, then the matrix EX/CPU is flooded with messages. All incoming calls will be ignored until t… |
| 1.3.6.1.4.1.1751.1.67.0.8 | excelSystemBusyWarningTrap | 0 | 0 | System Busy Warning state. |
| 1.3.6.1.4.1.1751.1.67.0.9 | excelSystemBusyClearedTrap | 0 | 0 | The System Busy condition on the switch has cleared. |
| 1.3.6.1.4.1.1751.1.67.0.10 | excelClockModeChangeTrap | 0 | 0 | This trap occurs when the clock mode was automatically switched or reference clock sources have been lost. The switch will automa… |
| 1.3.6.1.4.1.1751.1.67.0.11 | excelDSPResourceBlockTrap | 0 | 0 | This trap is sent when a DSP resource Block has occurred. |
| 1.3.6.1.4.1.1751.1.67.0.12 | excelDSPFuncNotCfgTrap | 0 | 0 | DSP Resource Function type not configured. |
| 1.3.6.1.4.1.1751.1.67.0.13 | excelDSPMgmtInconsistentTrap | 0 | 0 | DSP resource management inconsistent. |
| 1.3.6.1.4.1.1751.1.67.0.14 | excelDldTimeoutTrap | 0 | 0 | Download record timeout. |
| 1.3.6.1.4.1.1751.1.67.0.16 | excelResourceUtilThreshTrap | 0 | 0 | excelResourceUtilThreshtrap |
| 1.3.6.1.4.1.1751.1.67.0.17 | excelCardNotSuppTrap | 0 | 0 | Card type not supported. |
| 1.3.6.1.4.1.1751.1.67.0.18 | excelCardDldCorruptTrap | 0 | 0 | Card Download is corrupt |
| 1.3.6.1.4.1.1751.1.67.0.19 | excelCardNotRecTrap | 0 | 0 | Card type not recognized |
| 1.3.6.1.4.1.1751.1.67.0.20 | excelCardCfgResetTrap | 0 | 0 | Card's Configuration has been reset to defaults. |
| 1.3.6.1.4.1.1751.1.67.0.21 | excelCardConnMapFailTrap | 0 | 0 | Connection Map Failure. |
| 1.3.6.1.4.1.1751.1.67.0.22 | excelCardNoSWTrap | 0 | 0 | Software does not have download for card. |
| 1.3.6.1.4.1.1751.1.67.0.23 | excelCardNoALawTrap | 0 | 0 | Card does not support A-law encoding format. |
| 1.3.6.1.4.1.1751.1.67.0.24 | excelCardRevNotSuppTrap | 0 | 0 | Card revision not supported by system software revision. |
| 1.3.6.1.4.1.1751.1.67.0.25 | excelEthernetErrTrap | 0 | 0 | The switch determines the integrity of the host link by monitoring host ACKs to Poll messages. If two consecutive Poll messages a… |
| 1.3.6.1.4.1.1751.1.67.0.26 | excelNoFanTrayTrap | 0 | 0 | No fan tray installed |
| 1.3.6.1.4.1.1751.1.67.0.27 | excelExnetACommFailTrap | 0 | 0 | Exnet Port A - Communication failure |
| 1.3.6.1.4.1.1751.1.67.0.28 | excelExnetBCommFailTrap | 0 | 0 | Exnet Port B - Communication failure |
| 1.3.6.1.4.1.1751.1.67.0.29 | excelExnetAFiberFailTrap | 0 | 0 | Exnet Port A - Fiber laser failure |
| 1.3.6.1.4.1.1751.1.67.0.30 | excelExnetBFiberFailTrap | 0 | 0 | Exnet Port B - Fiber laser failure |
| 1.3.6.1.4.1.1751.1.67.0.31 | excelEXSAPITrap | 0 | 0 | This EXS Node is not using the extended API. |
| 1.3.6.1.4.1.1751.1.67.0.32 | excelEXSConfTSTrap | 0 | 0 | excelEXSConftSTrap |
| 1.3.6.1.4.1.1751.1.67.0.33 | excelEXSSCbusMasterChangedTrap | 0 | 0 | The master of the SCbus that the Excel EXNET Connect card represented by excelExnetConnectIndex resides on has changed. |
| 1.3.6.1.4.1.1751.1.67.0.34 | excelEXSSCbusFailureTrap | 0 | 0 | The SCbus that the Excel EXNET Connect card represented by excelExnetConnectIndex resides has failed. |
| 1.3.6.1.4.1.1751.1.67.0.35 | excelSS7NetCongestionTrap | 0 | 0 | SS7 Signaling Network traffic has reached congested levels. |
| 1.3.6.1.4.1.1751.1.67.0.36 | excelSS7RemISUPUnavailTrap | 0 | 0 | SS7 Remote ISUP unavailable. |
| 1.3.6.1.4.1.1751.1.67.0.37 | excelClockSourceLostTrap | 0 | 0 | The Reference Clock Source has been lost. No host intervention is needed for this occurance. The switch will automatically switc… |
| 1.3.6.1.4.1.1751.1.67.0.38 | excelClockSourceLostClearedTrap | 0 | 0 | The Reference Clock Source has been reestablished automatically by the switch. |
| 1.3.6.1.4.1.1751.1.67.0.39 | excelNoSupportDSPFuncTrap | 0 | 0 | Hardware cannot support function type. |
| 1.3.6.1.4.1.1751.1.67.0.40 | excelPartialMessageReceivedTrap | 0 | 0 | Partial message received. |
| 1.3.6.1.4.1.1751.1.67.0.41 | excelUnackedMsgTrap | 0 | 0 | Unacknowledged Message. |
| 1.3.6.1.4.1.1751.1.67.0.42 | excelNodeIDAlreadyExistsTrap | 0 | 0 | Node ID Already Exists. |
| 1.3.6.1.4.1.1751.1.67.0.43 | excelInvalidMsgLenTrap | 0 | 0 | Invalid Message Length. |
| 1.3.6.1.4.1.1751.1.67.0.44 | excelLogSpanIDExistsTrap | 0 | 0 | Logical span ID already exists on another node. |
| 1.3.6.1.4.1.1751.1.67.0.45 | excelNodeUpTrap | 0 | 0 | This trap is sent when the Agent recognizes a new node in the system. |
| 1.3.6.1.4.1.1751.1.67.0.46 | excelNodeDownTrap | 0 | 0 | This trap is sent when the Agent has lost connectivity to the switch. |
| 1.3.6.1.4.1.1751.1.67.0.47 | excelSubagentConnect | 0 | 0 | This trap is sent when the subagent process successfully connects with the master agent. |
| 1.3.6.1.4.1.1751.1.67.0.48 | excelSwitchConnect | 0 | 0 | This trap is sent when the subagent process successfully connects to the switch interface process. |
| 1.3.6.1.4.1.1751.1.67.0.49 | excelSwitchLossConnectivity | 0 | 0 | This trap is sent when the subagent process detects a loss of connectivity with the switch interface process |
| 1.3.6.1.4.1.1751.1.67.0.50 | excelSpanCarrierGroupAlarm | 0 | 0 | This trap is generated when the switch detects a Carrier Group Alarm for more then some customer configured time. |
| 1.3.6.1.4.1.1751.1.67.0.51 | excelSpanExcessiveSlips | 0 | 0 | This trap will occur when the switch detects an abnormally high number of slips occurring |
| 1.3.6.1.4.1.1751.1.67.0.52 | excelSpanJ1Failure | 0 | 0 | Generic J1 failure |
| 1.3.6.1.4.1.1751.1.67.0.53 | excelLineCardBusy | 0 | 0 | This trap will occur when the line card exceeds it's final traffic threshold level |
| 1.3.6.1.4.1.1751.1.67.0.54 | excelLineCardApproachBusy | 0 | 0 | This trap will occur when the line card reaches it's initial traffic threshold level |
| 1.3.6.1.4.1.1751.1.67.0.55 | excelLowMemory | 0 | 0 | This trap will occur when memory usage on the line card exceeds the defined threshold level |
| 1.3.6.1.4.1.1751.1.67.0.56 | excelCardStatusChange | 0 | 0 | This trap will occur on any generic card status change |
| 1.3.6.1.4.1.1751.1.67.0.57 | excelLowMemoryCleared | 0 | 0 | This trap will occur when memory usage on the line card returns below the defined threshold level |
| 1.3.6.1.4.1.1751.1.67.0.58 | excelGenericEvent | 0 | 0 | This trap will occur when an undefined event is received |
| 1.3.6.1.4.1.1751.1.67.0.59 | excelSubrateSwitchOver | 0 | 0 | None |
| 1.3.6.1.4.1.1751.1.67.0.60 | excelSwitchOverInterrupt | 0 | 0 | The D-channel has gone from being In Service to Out Of Service |
| 1.3.6.1.4.1.1751.1.67.0.61 | excelSwitchOverSuccess | 0 | 0 | The controller switchover was successful. The new D channel is now the controller |
| 1.3.6.1.4.1.1751.1.67.0.62 | excelSwitchOverFailure | 0 | 0 | The controller switchover failed. The existing D channel is still controlling the D channel |
| 1.3.6.1.4.1.1751.1.67.0.63 | excelBackupDiagnostics | 0 | 0 | Information Alarm when the state of the D channel changes |
| 1.3.6.1.4.1.1751.1.67.0.64 | excelSCbusMasterChange | 0 | 0 | The local bus clock master has changed e.g. If the EXNET Connect is configured to be the local (SC/MVIP) clock master and another… |
| 1.3.6.1.4.1.1751.1.67.0.65 | excelSCBusFail | 0 | 0 | This event occurs wheneve a matrix has lost contact with a remote SS7 card that is controlling CIC's that are located on that node |
| ... | ||||