The Reference Clock Source has been lost. No host
intervention is needed for this occurance. The switch
will automatically switch the clock mode to the next
available clock source.
Parsed from file Excel.MIB.txt
Company: None
Module: EXCEL-SWITCH-MIB
The Reference Clock Source has been lost. No host
intervention is needed for this occurance. The switch
will automatically switch the clock mode to the next
available clock source.
Parsed from file EXCEL-SWITCH-MIB.mib
Module: EXCEL-SWITCH-MIB
Vendor: Lucent Technologies
Module: EXCEL-SWITCH-MIB
[Automatically extracted from oidview.com]
excelClockSourceLostTrap NOTIFICATION-TYPE OBJECTS { excelSysLastAlarmRefClockSrc, excelSysLastAlarmNode, excelSysLastAlarmSeverity } STATUS current DESCRIPTION "The Reference Clock Source has been lost. No host intervention is needed for this occurance. The switch will automatically switch the clock mode to the next available clock source." ::= { excelTraps 37 }
excelClockSourceLostTrap NOTIFICATION-TYPE OBJECTS { excelSysLastAlarmRefClockSrc, excelSysLastAlarmNode, excelSysLastAlarmSeverity } STATUS current DESCRIPTION "The Reference Clock Source has been lost. No host intervention is needed for this occurance. The switch will automatically switch the clock mode to the next available clock source." ::= { excelTraps 37 }
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.1751.1.67.0.1 | excelCardUpTrap | 0 | 0 | This trap is sent when a card is recognized by the matrix for the first time. |
1.3.6.1.4.1.1751.1.67.0.2 | excelCardDownTrap | 0 | 0 | This trap is sent when a card goes out of service, is removed or for some reason is no longer recognized by the matrix. |
1.3.6.1.4.1.1751.1.67.0.3 | excelCardActiveTrap | 0 | 0 | This trap is sent after a switchover has occured from the standby to active card. excelDeviceCardSlotIndex will indicate the slo… |
1.3.6.1.4.1.1751.1.67.0.4 | excelFaultLoggedTrap | 0 | 0 | This trap is sent when a fault has occurred on a card. The slot number of the card on which a fault occurred is bound to the trap. |
1.3.6.1.4.1.1751.1.67.0.5 | excelRingUpTrap | 0 | 0 | This trap is sent when an Exnet ring comes up. |
1.3.6.1.4.1.1751.1.67.0.6 | excelRingDownTrap | 0 | 0 | This trap is sent when an Exnet ring goes down. |
1.3.6.1.4.1.1751.1.67.0.7 | excelSystemBusyTrap | 0 | 0 | If the system is in a Busy Condition, then the matrix EX/CPU is flooded with messages. All incoming calls will be ignored until t… |
1.3.6.1.4.1.1751.1.67.0.8 | excelSystemBusyWarningTrap | 0 | 0 | System Busy Warning state. |
1.3.6.1.4.1.1751.1.67.0.9 | excelSystemBusyClearedTrap | 0 | 0 | The System Busy condition on the switch has cleared. |
1.3.6.1.4.1.1751.1.67.0.10 | excelClockModeChangeTrap | 0 | 0 | This trap occurs when the clock mode was automatically switched or reference clock sources have been lost. The switch will automa… |
1.3.6.1.4.1.1751.1.67.0.11 | excelDSPResourceBlockTrap | 0 | 0 | This trap is sent when a DSP resource Block has occurred. |
1.3.6.1.4.1.1751.1.67.0.12 | excelDSPFuncNotCfgTrap | 0 | 0 | DSP Resource Function type not configured. |
1.3.6.1.4.1.1751.1.67.0.13 | excelDSPMgmtInconsistentTrap | 0 | 0 | DSP resource management inconsistent. |
1.3.6.1.4.1.1751.1.67.0.14 | excelDldTimeoutTrap | 0 | 0 | Download record timeout. |
1.3.6.1.4.1.1751.1.67.0.15 | excelRANUnAvailableTrap | 0 | 0 | Recorded announcement requested is no longer available in the system. |
1.3.6.1.4.1.1751.1.67.0.16 | excelResourceUtilThreshTrap | 0 | 0 | excelResourceUtilThreshtrap |
1.3.6.1.4.1.1751.1.67.0.17 | excelCardNotSuppTrap | 0 | 0 | Card type not supported. |
1.3.6.1.4.1.1751.1.67.0.18 | excelCardDldCorruptTrap | 0 | 0 | Card Download is corrupt |
1.3.6.1.4.1.1751.1.67.0.19 | excelCardNotRecTrap | 0 | 0 | Card type not recognized |
1.3.6.1.4.1.1751.1.67.0.20 | excelCardCfgResetTrap | 0 | 0 | Card's Configuration has been reset to defaults. |
1.3.6.1.4.1.1751.1.67.0.21 | excelCardConnMapFailTrap | 0 | 0 | Connection Map Failure. |
1.3.6.1.4.1.1751.1.67.0.22 | excelCardNoSWTrap | 0 | 0 | Software does not have download for card. |
1.3.6.1.4.1.1751.1.67.0.23 | excelCardNoALawTrap | 0 | 0 | Card does not support A-law encoding format. |
1.3.6.1.4.1.1751.1.67.0.24 | excelCardRevNotSuppTrap | 0 | 0 | Card revision not supported by system software revision. |
1.3.6.1.4.1.1751.1.67.0.25 | excelEthernetErrTrap | 0 | 0 | The switch determines the integrity of the host link by monitoring host ACKs to Poll messages. If two consecutive Poll messages a… |
1.3.6.1.4.1.1751.1.67.0.26 | excelNoFanTrayTrap | 0 | 0 | No fan tray installed |
1.3.6.1.4.1.1751.1.67.0.27 | excelExnetACommFailTrap | 0 | 0 | Exnet Port A - Communication failure |
1.3.6.1.4.1.1751.1.67.0.28 | excelExnetBCommFailTrap | 0 | 0 | Exnet Port B - Communication failure |
1.3.6.1.4.1.1751.1.67.0.29 | excelExnetAFiberFailTrap | 0 | 0 | Exnet Port A - Fiber laser failure |
1.3.6.1.4.1.1751.1.67.0.30 | excelExnetBFiberFailTrap | 0 | 0 | Exnet Port B - Fiber laser failure |
1.3.6.1.4.1.1751.1.67.0.31 | excelEXSAPITrap | 0 | 0 | This EXS Node is not using the extended API. |
1.3.6.1.4.1.1751.1.67.0.32 | excelEXSConfTSTrap | 0 | 0 | excelEXSConftSTrap |
1.3.6.1.4.1.1751.1.67.0.33 | excelEXSSCbusMasterChangedTrap | 0 | 0 | The master of the SCbus that the Excel EXNET Connect card represented by excelExnetConnectIndex resides on has changed. |
1.3.6.1.4.1.1751.1.67.0.34 | excelEXSSCbusFailureTrap | 0 | 0 | The SCbus that the Excel EXNET Connect card represented by excelExnetConnectIndex resides has failed. |
1.3.6.1.4.1.1751.1.67.0.35 | excelSS7NetCongestionTrap | 0 | 0 | SS7 Signaling Network traffic has reached congested levels. |
1.3.6.1.4.1.1751.1.67.0.36 | excelSS7RemISUPUnavailTrap | 0 | 0 | SS7 Remote ISUP unavailable. |
1.3.6.1.4.1.1751.1.67.0.38 | excelClockSourceLostClearedTrap | 0 | 0 | The Reference Clock Source has been reestablished automatically by the switch. |
1.3.6.1.4.1.1751.1.67.0.39 | excelNoSupportDSPFuncTrap | 0 | 0 | Hardware cannot support function type. |
1.3.6.1.4.1.1751.1.67.0.40 | excelPartialMessageReceivedTrap | 0 | 0 | Partial message received. |
1.3.6.1.4.1.1751.1.67.0.41 | excelUnackedMsgTrap | 0 | 0 | Unacknowledged Message. |
1.3.6.1.4.1.1751.1.67.0.42 | excelNodeIDAlreadyExistsTrap | 0 | 0 | Node ID Already Exists. |
1.3.6.1.4.1.1751.1.67.0.43 | excelInvalidMsgLenTrap | 0 | 0 | Invalid Message Length. |
1.3.6.1.4.1.1751.1.67.0.44 | excelLogSpanIDExistsTrap | 0 | 0 | Logical span ID already exists on another node. |
1.3.6.1.4.1.1751.1.67.0.45 | excelNodeUpTrap | 0 | 0 | This trap is sent when the Agent recognizes a new node in the system. |
1.3.6.1.4.1.1751.1.67.0.46 | excelNodeDownTrap | 0 | 0 | This trap is sent when the Agent has lost connectivity to the switch. |
1.3.6.1.4.1.1751.1.67.0.47 | excelSubagentConnect | 0 | 0 | This trap is sent when the subagent process successfully connects with the master agent. |
1.3.6.1.4.1.1751.1.67.0.48 | excelSwitchConnect | 0 | 0 | This trap is sent when the subagent process successfully connects to the switch interface process. |
1.3.6.1.4.1.1751.1.67.0.49 | excelSwitchLossConnectivity | 0 | 0 | This trap is sent when the subagent process detects a loss of connectivity with the switch interface process |
1.3.6.1.4.1.1751.1.67.0.50 | excelSpanCarrierGroupAlarm | 0 | 0 | This trap is generated when the switch detects a Carrier Group Alarm for more then some customer configured time. |
1.3.6.1.4.1.1751.1.67.0.51 | excelSpanExcessiveSlips | 0 | 0 | This trap will occur when the switch detects an abnormally high number of slips occurring |
1.3.6.1.4.1.1751.1.67.0.52 | excelSpanJ1Failure | 0 | 0 | Generic J1 failure |
1.3.6.1.4.1.1751.1.67.0.53 | excelLineCardBusy | 0 | 0 | This trap will occur when the line card exceeds it's final traffic threshold level |
1.3.6.1.4.1.1751.1.67.0.54 | excelLineCardApproachBusy | 0 | 0 | This trap will occur when the line card reaches it's initial traffic threshold level |
1.3.6.1.4.1.1751.1.67.0.55 | excelLowMemory | 0 | 0 | This trap will occur when memory usage on the line card exceeds the defined threshold level |
1.3.6.1.4.1.1751.1.67.0.56 | excelCardStatusChange | 0 | 0 | This trap will occur on any generic card status change |
1.3.6.1.4.1.1751.1.67.0.57 | excelLowMemoryCleared | 0 | 0 | This trap will occur when memory usage on the line card returns below the defined threshold level |
1.3.6.1.4.1.1751.1.67.0.58 | excelGenericEvent | 0 | 0 | This trap will occur when an undefined event is received |
1.3.6.1.4.1.1751.1.67.0.59 | excelSubrateSwitchOver | 0 | 0 | None |
1.3.6.1.4.1.1751.1.67.0.60 | excelSwitchOverInterrupt | 0 | 0 | The D-channel has gone from being In Service to Out Of Service |
1.3.6.1.4.1.1751.1.67.0.61 | excelSwitchOverSuccess | 0 | 0 | The controller switchover was successful. The new D channel is now the controller |
1.3.6.1.4.1.1751.1.67.0.62 | excelSwitchOverFailure | 0 | 0 | The controller switchover failed. The existing D channel is still controlling the D channel |
1.3.6.1.4.1.1751.1.67.0.63 | excelBackupDiagnostics | 0 | 0 | Information Alarm when the state of the D channel changes |
1.3.6.1.4.1.1751.1.67.0.64 | excelSCbusMasterChange | 0 | 0 | The local bus clock master has changed e.g. If the EXNET Connect is configured to be the local (SC/MVIP) clock master and another… |
1.3.6.1.4.1.1751.1.67.0.65 | excelSCBusFail | 0 | 0 | This event occurs wheneve a matrix has lost contact with a remote SS7 card that is controlling CIC's that are located on that node |
1.3.6.1.4.1.1751.1.67.0.66 | excelGeneralSoftwareError | 0 | 0 | Default error message for unexpected errors. |
1.3.6.1.4.1.1751.1.67.0.67 | excelRearSlotController | 0 | 0 | Communications resources are being currently controlled by the corresponding rear slot |
1.3.6.1.4.1.1751.1.67.0.68 | excelFrontSlotController | 0 | 0 | Communications resources are being currently controlled by the corresponding front slot |
1.3.6.1.4.1.1751.1.67.0.69 | excelConnectNotification | 0 | 0 | None |
1.3.6.1.4.1.1751.1.67.0.70 | excelRouteTableUpdated | 0 | 0 | The active route table has been updated |
1.3.6.1.4.1.1751.1.67.0.71 | excelResourceGroupTableUpdated | 0 | 0 | The active resource group table has been updated |
1.3.6.1.4.1.1751.1.67.0.73 | excelOldRouteTableDeleted | 0 | 0 | A previously active routing table has been deleted |
1.3.6.1.4.1.1751.1.67.0.74 | excelRouteTableForcefullyDeleted | 0 | 0 | The active route tabel was forcefully deleted |
1.3.6.1.4.1.1751.1.67.0.75 | excelResourceGroupTableForceDelete | 0 | 0 | The active resource group table has been forcefully deleted |
1.3.6.1.4.1.1751.1.67.0.76 | excelLoadProblem | 0 | 0 | This event will occur when a problem occurs during the flash or RAM loading |
1.3.6.1.4.1.1751.1.67.0.77 | excelTFTPFailure | 0 | 0 | This event will occur when a problem occurs during TFTP processing |
1.3.6.1.4.1.1751.1.67.0.78 | excelPPLEventL3PCIC | 0 | 0 | PPL event received from Layer 3 Plus CIC, component ID 15. The possible event ID's are : 1 Reset confirm indication 8 Remote main… |
1.3.6.1.4.1.1751.1.67.0.79 | excelPPLEventL3PLINK | 0 | 0 | PPL event received from Layer 3 Plus Link, component ID 16. The possible eventID's are: 1 Remote Inhibit Confirmation 2 Remore Un… |
1.3.6.1.4.1.1751.1.67.0.80 | excelPPLEventCPC | 0 | 0 | PPL event received from Call Processing Control, component ID 18. The possible eventID's are: 3 Continuity check incoming failur… |
1.3.6.1.4.1.1751.1.67.0.81 | excelPPLEventSPRC | 0 | 0 | PPL event Signal Procedure Control (SPRC), component ID 19. The possible eventID's are: 1 Format error in incoming message 2 … |
1.3.6.1.4.1.1751.1.67.0.82 | excelPPLEventBLS | 0 | 0 | PPL event Blocking Signal Sending(BLS), component ID 22. The possible eventID's are: 1 Format error in incoming message 2 … |
1.3.6.1.4.1.1751.1.67.0.83 | excelPPLEventBLR | 0 | 0 | PPL event received from Blocking Signal Reception(BLR), component ID 23. The possible eventID's are: 1 Blocking/Unblocking… |
1.3.6.1.4.1.1751.1.67.0.84 | excelPPLEventCRS | 0 | 0 | PPL event Circuit Reset Sending (CRS), component ID 24. The possible eventID's are: 1 First expiration of timer 17 |
1.3.6.1.4.1.1751.1.67.0.85 | excelPPLEventCRR | 0 | 0 | PPL event Circuit Reset Reception (CRR), component ID 25. The possible eventID's are: 1 Circuit Reset Reception |
1.3.6.1.4.1.1751.1.67.0.86 | excelPPLEventUCIC | 0 | 0 | PPL event Unequipped CIC Reception (UCIC), component Id 26. The possible eventID's are: 1 Unequipted CIC Reception |
1.3.6.1.4.1.1751.1.67.0.87 | excelPPLEventCGRS | 0 | 0 | PPL event Circuit Group Reset Sending (CGRS), component Id 27. The possible eventID's are: 1 Failure to rcv ack after sending gro… |
... |