An entry in the V.35/EIA-530 Port Configuration table.
Parsed from file CP300.mib.txt
Company: marconi
Module: AAC3-MIB
Vendor: ADC Kentrox
Module: AAC3-MIB (aac3-140.mib)
Type: ENTRY
Access: not-accessible
Syntax: V35ConfigEntry
Automatically extracted from www.mibdepot.com
v35ConfigEntry OBJECT-TYPE SYNTAX V35ConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the V.35/EIA-530 Port Configuration table." INDEX { v35PortIndex } ::= { v35ConfigTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.181.1.13.6.4.1.1.1 | v35PortIndex | 0 | 0 | This variable uniquely identifies the V.35/EIA-530 port for which this table entry applies. It has the same value as the portInd… |
1.3.6.1.4.1.181.1.13.6.4.1.1.2 | v35IfSelect | 0 | 0 | The value of this variable selects the interface mode for the port. The value v35SelectV35 selects V.35 mode, while the value v3… |
1.3.6.1.4.1.181.1.13.6.4.1.1.3 | v35LosDetect | 0 | 0 | The value of this variable determines which signal, if any, causes an LOS condition when deasserted. The behavior of the system … |
1.3.6.1.4.1.181.1.13.6.4.1.1.4 | v35ClkRate | 0 | 0 | This variable sets the V.35/EIA-530 interface clock rate when the interface sources the clock. When the interface clock is loope… |
1.3.6.1.4.1.181.1.13.6.4.1.1.5 | v35ClkSrc | 0 | 0 | This variable controls the source of clocks on the V.35/EIA-530 interface. The 'v35ClkNotLooped' option selects the local AAC-3 c… |
1.3.6.1.4.1.181.1.13.6.4.1.1.6 | v35Loopback | 0 | 0 | This variable controls loop back configuration of the V.35/ EIA-530 interface. The value v35NoLoopback disables loopbacks. The … |
1.3.6.1.4.1.181.1.13.6.4.1.1.7 | v35InFlowCntl | 0 | 0 | This variable determines the input side flow control, if any. The value v35InFlowNone specifies no flow control. The value v35In… |
1.3.6.1.4.1.181.1.13.6.4.1.1.8 | v35OutFlowCntl | 0 | 0 | This variable determines the output side flow control, if any. The value v35OutFlowNone specifies no flow control. The values v… |
1.3.6.1.4.1.181.1.13.6.4.1.1.9 | v35Status | 0 | 0 | This variable indicates the alarm status of the V.35/EIA-530 interface. The v35Status is a bit map represented as a sum, therefor… |
1.3.6.1.4.1.181.1.13.6.4.1.1.10 | v35InClockPolarity | 0 | 0 | This variable controls the polarity of the clock used to time incoming data on the V.35/EIA 530 port. The value v35InClkNormal(1… |