Incremented every time the NPRI blocks the incoming call. -
PRI only.
Parsed from file RDS1.MIB.txt
Company: cai
Module: RDS1-MIB
Vendor: 3Com
Module: RDS1-MIB (RDS1.MIB)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
usrinCallCallBack OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Incremented every time the NPRI blocks the incoming call. - PRI only." ::= { usrds1StatEntry 16 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.1.27.2.1.1 | usrds1StatIndex | 0 | 0 | The index value which uniquely identifies the CSU to which this entry is applicable. The value of this object matches the value … |
| 1.3.6.1.4.1.429.1.27.2.1.2 | usrds1StatReceiverGain | 0 | 0 | This object identifies the amount of gain applied to boost the receive signal level to an appropriate operating level. |
| 1.3.6.1.4.1.429.1.27.2.1.3 | usrds1StatSwitchTypeActve | 0 | 0 | usrds1StatSwitchtypeActve |
| 1.3.6.1.4.1.429.1.27.2.1.4 | usrds1StatDchanState | 0 | 0 | This object reflects the operational status of the D channel on the T1-PRI ISDN NAC. |
| 1.3.6.1.4.1.429.1.27.2.1.5 | usrds1StatE1ContCrc | 0 | 0 | This object indicates when continuous CRC errors are being received on the E1 DS1 span line on the T1-PRI ISDN NAC. |
| 1.3.6.1.4.1.429.1.27.2.1.6 | usrds1StatE1PhysicalState | 0 | 0 | This object reflects the physical state of the E1 DS1 span line on the T1-PRI ISDN NAC. |
| 1.3.6.1.4.1.429.1.27.2.1.7 | usrds1StatLoopBackInit | 0 | 0 | This object tells if the loopback was initiated by the network or by command |
| 1.3.6.1.4.1.429.1.27.2.1.8 | usrds1StatDs0SrvcChngLst | 0 | 0 | This object contains the current list of DS0s that have changed their state from In Service to Out of Service or Vice versa. The… |
| 1.3.6.1.4.1.429.1.27.2.1.9 | usrds1SignalModeActive | 0 | 0 | This object is the same as in 1406 but shows what the module booted up with. This is needed until the changes to the 1406 object … |
| 1.3.6.1.4.1.429.1.27.2.1.10 | usrinCallmodemNotAvail | 0 | 0 | Incremented every time an incoming call can not be completed due to no idle modem available. |
| 1.3.6.1.4.1.429.1.27.2.1.11 | usrinCallInvlidBearerCapa | 0 | 0 | Incremented every time the NPRI receives invalid bearer capability. - PRI only. |
| 1.3.6.1.4.1.429.1.27.2.1.12 | usrinCallInvalidChannlID | 0 | 0 | Incremented every time the NPRI receives invalid channel ID. - PRI only. |
| 1.3.6.1.4.1.429.1.27.2.1.13 | usrinCallInvlidProgrsInd | 0 | 0 | Incremented every time the NPRI receives invalid progress indicator. - PRI only. |
| 1.3.6.1.4.1.429.1.27.2.1.14 | usrinCallInvlidCallngPrty | 0 | 0 | Incremented every time the NPRI receives invalid calling party number. - PRI only. |
| 1.3.6.1.4.1.429.1.27.2.1.15 | usrinCallInvlidCalledPrty | 0 | 0 | Incremented every time the NPRI receives invalid called party number. - PRI only. |
| 1.3.6.1.4.1.429.1.27.2.1.17 | usrinCallLoopStrtNoRngOff | 0 | 0 | Loop start, Pegged every time the no ring off after ring on. - CHT1 PRI only. |
| 1.3.6.1.4.1.429.1.27.2.1.18 | usroutCallTelcoDisconnct | 0 | 0 | Incremented every time the TELCO disconnect a setting up call. - PRI only. |
| 1.3.6.1.4.1.429.1.27.2.1.19 | usroutCallEMWinkTimeOut | 0 | 0 | E&M Wink start, Pegged every time the TELCO fails to wink (5 sec) - CHT1 only. |
| 1.3.6.1.4.1.429.1.27.2.1.20 | usroutCallEMWinkTooShort | 0 | 0 | E&M Wink start, Pegged every time the wink too short (less than 260 ms) - CHT1 only. |
| 1.3.6.1.4.1.429.1.27.2.1.21 | usroutCallNoChannelAvail | 0 | 0 | Incremented every time the NCC receives outgoing call request from TPS but there is no channel available for the outgoing call. |
| 1.3.6.1.4.1.429.1.27.2.1.22 | usrdiscNoTelcoRespDialIn | 0 | 0 | In E&M dialin state machine, TELCO does not respond to NCT disconnect signal. Pegged every time when it happens. - CHT1 only. |
| 1.3.6.1.4.1.429.1.27.2.1.23 | usrdiscNoTelcoRespDialOut | 0 | 0 | In E&M dialout state machine, TELCO does not respond to NCT disconnect signal. Pegged every time when it happens. - CHT1 only. |
| 1.3.6.1.4.1.429.1.27.2.1.24 | usrdiscNoTelcoRespGround | 0 | 0 | In ground start dial in and dial out state machine, TELCO, does not respond to NCT disconnect signal. Pegged every time when it h… |
| 1.3.6.1.4.1.429.1.27.2.1.25 | usrds0BulkAccessABStat | 0 | 0 | This object contains the AB bit status. It contains a string of bytes which contain the ABCD signaling transmit and receive bits … |
| 1.3.6.1.4.1.429.1.27.2.1.26 | usrds0BlkAccessStatDs0Mdm | 0 | 0 | This object contains all of the ids0Stat table parameters for all the DS0's on the DS1. |
| 1.3.6.1.4.1.429.1.27.2.1.27 | usrds1StatNFASSpanState | 0 | 0 | This object displays the span's current state with regard to D-channel. |
| 1.3.6.1.4.1.429.1.27.2.1.28 | usrds1StatSs7ModeActive | 0 | 0 | This object indicates what the active SS7 mode is after the NAC boots up. The usrds1CfgSs7Mode configuration object determines th… |
| 1.3.6.1.4.1.429.1.27.2.1.29 | usrds1StatLpBkDS0Cause | 0 | 0 | This object indicates the cause of the DS0 entering or exiting at a loop back. SLAP indicates that the DS0 loop back change was r… |