Vendor: Avaya
Module: NTN-QOS-POLICY-EVOL-PIB (NTN-QOS-POLICY-EVOL-PIB.mib)
Type: OBJ ID
Access:
Syntax:
Automatically extracted from www.mibdepot.com
ntnQosPolicyAgtClasses OBJECT IDENTIFIER ::= { ntnQosPolicyEvolPibClasses 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.4.7.1.11.1 | ntnQosPrcSupportTable | 1 | 6 | Each instance of this class specifies a PRC that the device supports and a bit string to indicate the attributes of the class tha… |
| 1.3.6.1.4.1.45.4.7.1.11.2 | ntnQosPolicyDeviceIdentTable | 1 | 4 | This class contains a single policy rule instance that contains device-specific information. |
| 1.3.6.1.4.1.45.4.7.1.11.3 | ntnQosConfigResetToDefaults | 1 | 1 | All installed QoS policy state information can be deleted and reset to the device's default state by setting the value of this ob… |
| 1.3.6.1.4.1.45.4.7.1.11.4 | ntnQosConfigTrackStatistics | 1 | 1 | The value of this attribute determines if statistics tracking is enabled for system-level policies. System-level policies are cre… |
| 1.3.6.1.4.1.45.4.7.1.11.5 | ntnQosConfigNVCommitDelay | 1 | 1 | Specifies the maximum amount of time, in seconds, before non-volatile QoS configuration data will be written to non-volatile stor… |
| 1.3.6.1.4.1.45.4.7.1.11.6 | ntnQosConfigDefaultQueueCfg | 1 | 1 | The value of this attribute determines the queue set that is associated with all egress interfaces by default. A queue set is char… |
| 1.3.6.1.4.1.45.4.7.1.11.7 | ntnQosConfigDefaultBufferingCaps | 1 | 1 | The value of this attribute determines the method through which buffering resources are allocated to ports sharing a pool of buff… |
| 1.3.6.1.4.1.45.4.7.1.11.8 | ntnQosConfigUBPSupportLevel | 1 | 1 | Determines whether QoS Agent User Based Policy (UBP) support is enabled and, if so, what level of support is enabled. Setting the… |
| 1.3.6.1.4.1.45.4.7.1.11.9 | ntnQosConfigRoleAssocCompatLevel | 1 | 1 | Determines whether interface role associations are subject to loose or strict capabilities verification. Setting the value of thi… |
| 1.3.6.1.4.1.45.4.7.1.11.10 | ntnQosConfigDappEnable | 1 | 1 | Dictates whether the DoS Attack Prevention Package (DAPP) is enabled on all applicable ports and, when enabled, if resources will… |
| 1.3.6.1.4.1.45.4.7.1.11.11 | ntnQosConfigDappMinTcpHdrSize | 1 | 1 | DAPP minimum TCP header length allowed. Used when performing TCP fragment validation. IPv4 TCP first fragment packets will be dro… |
| 1.3.6.1.4.1.45.4.7.1.11.12 | ntnQosConfigDappIpv4IcmpMaxLength | 1 | 1 | DAPP maximum IPv4 ICMP length. Used when performing ICMP validation. IPv4 ICMP packets will be dropped if the length (IP payload)… |
| 1.3.6.1.4.1.45.4.7.1.11.13 | ntnQosConfigDappIpv6IcmpMaxLength | 1 | 1 | DAPP maximum IPv6 ICMP length. Used when performing ICMP validation. IPv6 ICMP packets will be dropped if the length exceeds this… |
| 1.3.6.1.4.1.45.4.7.1.11.14 | ntnQosConfigNtApplicationMode | 1 | 1 | Controls NT Application Mode processing. When enabled, identified NT application traffic will be given preferential treatment ove… |
| 1.3.6.1.4.1.45.4.7.1.11.15 | ntnQosConfigQosOperMode | 1 | 1 | Controls overall QoS processing for the system. When enabled, all QoS functionality can be exercised by the user. When disabled, … |
| 1.3.6.1.4.1.45.4.7.1.11.16 | ntnQosConfigTrustedProcessingMode | 1 | 1 | Controls filter usage related to Trusted interface class processing on platforms using filters to support treating traffic as tru… |
| 1.3.6.1.4.1.45.4.7.1.11.17 | ntnQosConfigResetToPartialDefaults | 1 | 1 | Most installed QoS policy state information can be deleted and reset to the device's default state by setting the value of this o… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.4.7.1.1 | ntnQosInterfaceTypeTable | 1 | 7 | Interface type definitions. This class describes the types of interfaces that exist on the device. An interface type is denoted b… |
| 1.3.6.1.4.1.45.4.7.1.2 | ntnQosQsetPriAssignmentTable | 1 | 7 | Supports the assignment of 802.1p user priority values to a queue for each interface with a specific queue set. There will be 8 i… |
| 1.3.6.1.4.1.45.4.7.1.3 | ntnQosQsetDscpAssignmentTable | 1 | 7 | Supports the assignment of DSCP values to a queue for each interface with a specific queue set. There will be 64 instances of thi… |
| 1.3.6.1.4.1.45.4.7.1.4 | ntnQosShapingParamsTable | 1 | 8 | Supports the definition of shaping parameters that can be applied to individual flows. Shaping criteria is associated with a flow… |
| 1.3.6.1.4.1.45.4.7.1.5 | ntnClassifierClasses | 12 | 108 | None |
| 1.3.6.1.4.1.45.4.7.1.6 | ntnQosMeterClasses | 5 | 37 | None |
| 1.3.6.1.4.1.45.4.7.1.7 | ntnQosActionClasses | 4 | 30 | None |
| 1.3.6.1.4.1.45.4.7.1.8 | ntnQosPolicyClasses | 7 | 72 | None |
| 1.3.6.1.4.1.45.4.7.1.9 | ntnQosInterfaceClasses | 8 | 66 | None |
| 1.3.6.1.4.1.45.4.7.1.10 | ntnQosMappingClasses | 3 | 25 | None |
| 1.3.6.1.4.1.45.4.7.1.12 | ntnQosInterfaceTypeNextFree | 1 | 1 | This object contains an unused value for ntnQosInterfaceTypeId, or a zero to indicate that none exist. |
| 1.3.6.1.4.1.45.4.7.1.13 | ntnQosApplicationClasses | 12 | 182 | None |
| 1.3.6.1.4.1.45.4.7.1.14 | ntnQosDEITable | 1 | 4 | Table to configure DEI support. DEI provides the user the option to set the packet color based on the CFI (used as DEI) bit in th… |
| 1.3.6.1.4.1.45.4.7.1.15 | ntnQosQuickPolicy | 19 | 38 | None |
| 1.3.6.1.4.1.45.4.7.1.16 | ntnQosFilterLimiting | 2 | 4 | None |