DAPP minimum TCP header length allowed. Used when
performing TCP fragment validation. IPv4 TCP first
fragment packets will be dropped if the TCP header
(IP payload) is less than this value.
Parsed from file pibNtnEvol_004.mib.txt
Company: baynetworks
Module: NTN-QOS-POLICY-EVOL-PIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
ntnQosConfigDappMinTcpHdrSize OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "DAPP minimum TCP header length allowed. Used when performing TCP fragment validation. IPv4 TCP first fragment packets will be dropped if the TCP header (IP payload) is less than this value." ::= { ntnQosPolicyAgtClasses 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.4.7.1.11.11.0 | ntnQosConfigDappMinTcpHdrSize | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.4.7.1.11.1 | ntnQosPrcSupportTable | 1 | 6 | Each instance of this class specifies a PRC that the device supports and a bit string to indicate the attributes of the class tha… |
| 1.3.6.1.4.1.45.4.7.1.11.2 | ntnQosPolicyDeviceIdentTable | 1 | 4 | This class contains a single policy rule instance that contains device-specific information. |
| 1.3.6.1.4.1.45.4.7.1.11.3 | ntnQosConfigResetToDefaults | 1 | 1 | All installed QoS policy state information can be deleted and reset to the device's default state by setting the value of this ob… |
| 1.3.6.1.4.1.45.4.7.1.11.4 | ntnQosConfigTrackStatistics | 1 | 1 | The value of this attribute determines if statistics tracking is enabled for system-level policies. System-level policies are cre… |
| 1.3.6.1.4.1.45.4.7.1.11.5 | ntnQosConfigNVCommitDelay | 1 | 1 | Specifies the maximum amount of time, in seconds, before non-volatile QoS configuration data will be written to non-volatile stor… |
| 1.3.6.1.4.1.45.4.7.1.11.6 | ntnQosConfigDefaultQueueCfg | 1 | 1 | The value of this attribute determines the queue set that is associated with all egress interfaces by default. A queue set is char… |
| 1.3.6.1.4.1.45.4.7.1.11.7 | ntnQosConfigDefaultBufferingCaps | 1 | 1 | The value of this attribute determines the method through which buffering resources are allocated to ports sharing a pool of buff… |
| 1.3.6.1.4.1.45.4.7.1.11.8 | ntnQosConfigUBPSupportLevel | 1 | 1 | Determines whether QoS Agent User Based Policy (UBP) support is enabled and, if so, what level of support is enabled. Setting the… |
| 1.3.6.1.4.1.45.4.7.1.11.9 | ntnQosConfigRoleAssocCompatLevel | 1 | 1 | Determines whether interface role associations are subject to loose or strict capabilities verification. Setting the value of thi… |
| 1.3.6.1.4.1.45.4.7.1.11.10 | ntnQosConfigDappEnable | 1 | 1 | Dictates whether the DoS Attack Prevention Package (DAPP) is enabled on all applicable ports and, when enabled, if resources will… |
| 1.3.6.1.4.1.45.4.7.1.11.12 | ntnQosConfigDappIpv4IcmpMaxLength | 1 | 1 | DAPP maximum IPv4 ICMP length. Used when performing ICMP validation. IPv4 ICMP packets will be dropped if the length (IP payload)… |
| 1.3.6.1.4.1.45.4.7.1.11.13 | ntnQosConfigDappIpv6IcmpMaxLength | 1 | 1 | DAPP maximum IPv6 ICMP length. Used when performing ICMP validation. IPv6 ICMP packets will be dropped if the length exceeds this… |
| 1.3.6.1.4.1.45.4.7.1.11.14 | ntnQosConfigNtApplicationMode | 1 | 1 | Controls NT Application Mode processing. When enabled, identified NT application traffic will be given preferential treatment ove… |
| 1.3.6.1.4.1.45.4.7.1.11.15 | ntnQosConfigQosOperMode | 1 | 1 | Controls overall QoS processing for the system. When enabled, all QoS functionality can be exercised by the user. When disabled, … |
| 1.3.6.1.4.1.45.4.7.1.11.16 | ntnQosConfigTrustedProcessingMode | 1 | 1 | Controls filter usage related to Trusted interface class processing on platforms using filters to support treating traffic as tru… |
| 1.3.6.1.4.1.45.4.7.1.11.17 | ntnQosConfigResetToPartialDefaults | 1 | 1 | Most installed QoS policy state information can be deleted and reset to the device's default state by setting the value of this o… |