Determines whether QoS Agent User Based Policy
(UBP) support is enabled and, if so, what level
of support is enabled. Setting the value of this
attribute to 'ubpSupportDisabled(1)' will cause
user information forwarded by other applications
(e.g., EAP) to be ignored by the QoS Agent.
A value of 'ubpSupportHighSecurityLocalData(2)'
or 'ubpSupportLowSecurityLocalData(3)' will cause
the internal QoS Agent database to be searched for
user-specific classification data when user
information is forwarded by other applications.
When a high level of security is requested, user-
specific classification data that is found must be
successfully installed before a user is given
access to the switch. A low level of security
means that a user will be given access to the
switch even if the resources to install user-
specific classification data are not currently
available.
Lastly, a value of 'ubpSupportEPMData(4)' will
cause notifications to be generated for Enterprise
Policy Manager (EPM) consumption based on user
information forwarded by other applications.
Notifications will be generated for events of
interest to EPM, such as user addition/deletion
that is associated with User Based Policy (UBP)
support. Notifications will not be generated
otherwise. Note that the information that is
necessary to construct and transmit a notification
must also be configured for this value to be
useful.
Changing the value of this attribute will cause
UBP data currently in-use to be lost.
Parsed from file pibNtnEvol_004.mib.txt
Company: baynetworks
Module: NTN-QOS-POLICY-EVOL-PIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
ntnQosConfigUBPSupportLevel OBJECT-TYPE SYNTAX INTEGER { ubpSupportDisabled(1), ubpSupportHighSecurityLocalData(2), ubpSupportLowSecurityLocalData(3), ubpSupportEPMData(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines whether QoS Agent User Based Policy (UBP) support is enabled and, if so, what level of support is enabled. Setting the value of this attribute to 'ubpSupportDisabled(1)' will cause user information forwarded by other applications (e.g., EAP) to be ignored by the QoS Agent. A value of 'ubpSupportHighSecurityLocalData(2)' or 'ubpSupportLowSecurityLocalData(3)' will cause the internal QoS Agent database to be searched for user-specific classification data when user information is forwarded by other applications. When a high level of security is requested, user- specific classification data that is found must be successfully installed before a user is given access to the switch. A low level of security means that a user will be given access to the switch even if the resources to install user- specific classification data are not currently available. Lastly, a value of 'ubpSupportEPMData(4)' will cause notifications to be generated for Enterprise Policy Manager (EPM) consumption based on user information forwarded by other applications. Notifications will be generated for events of interest to EPM, such as user addition/deletion that is associated with User Based Policy (UBP) support. Notifications will not be generated otherwise. Note that the information that is necessary to construct and transmit a notification must also be configured for this value to be useful. Changing the value of this attribute will cause UBP data currently in-use to be lost." ::= { ntnQosPolicyAgtClasses 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.4.7.1.11.8.0 | ntnQosConfigUBPSupportLevel | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.4.7.1.11.1 | ntnQosPrcSupportTable | 1 | 6 | Each instance of this class specifies a PRC that the device supports and a bit string to indicate the attributes of the class tha… |
| 1.3.6.1.4.1.45.4.7.1.11.2 | ntnQosPolicyDeviceIdentTable | 1 | 4 | This class contains a single policy rule instance that contains device-specific information. |
| 1.3.6.1.4.1.45.4.7.1.11.3 | ntnQosConfigResetToDefaults | 1 | 1 | All installed QoS policy state information can be deleted and reset to the device's default state by setting the value of this ob… |
| 1.3.6.1.4.1.45.4.7.1.11.4 | ntnQosConfigTrackStatistics | 1 | 1 | The value of this attribute determines if statistics tracking is enabled for system-level policies. System-level policies are cre… |
| 1.3.6.1.4.1.45.4.7.1.11.5 | ntnQosConfigNVCommitDelay | 1 | 1 | Specifies the maximum amount of time, in seconds, before non-volatile QoS configuration data will be written to non-volatile stor… |
| 1.3.6.1.4.1.45.4.7.1.11.6 | ntnQosConfigDefaultQueueCfg | 1 | 1 | The value of this attribute determines the queue set that is associated with all egress interfaces by default. A queue set is char… |
| 1.3.6.1.4.1.45.4.7.1.11.7 | ntnQosConfigDefaultBufferingCaps | 1 | 1 | The value of this attribute determines the method through which buffering resources are allocated to ports sharing a pool of buff… |
| 1.3.6.1.4.1.45.4.7.1.11.9 | ntnQosConfigRoleAssocCompatLevel | 1 | 1 | Determines whether interface role associations are subject to loose or strict capabilities verification. Setting the value of thi… |
| 1.3.6.1.4.1.45.4.7.1.11.10 | ntnQosConfigDappEnable | 1 | 1 | Dictates whether the DoS Attack Prevention Package (DAPP) is enabled on all applicable ports and, when enabled, if resources will… |
| 1.3.6.1.4.1.45.4.7.1.11.11 | ntnQosConfigDappMinTcpHdrSize | 1 | 1 | DAPP minimum TCP header length allowed. Used when performing TCP fragment validation. IPv4 TCP first fragment packets will be dro… |
| 1.3.6.1.4.1.45.4.7.1.11.12 | ntnQosConfigDappIpv4IcmpMaxLength | 1 | 1 | DAPP maximum IPv4 ICMP length. Used when performing ICMP validation. IPv4 ICMP packets will be dropped if the length (IP payload)… |
| 1.3.6.1.4.1.45.4.7.1.11.13 | ntnQosConfigDappIpv6IcmpMaxLength | 1 | 1 | DAPP maximum IPv6 ICMP length. Used when performing ICMP validation. IPv6 ICMP packets will be dropped if the length exceeds this… |
| 1.3.6.1.4.1.45.4.7.1.11.14 | ntnQosConfigNtApplicationMode | 1 | 1 | Controls NT Application Mode processing. When enabled, identified NT application traffic will be given preferential treatment ove… |
| 1.3.6.1.4.1.45.4.7.1.11.15 | ntnQosConfigQosOperMode | 1 | 1 | Controls overall QoS processing for the system. When enabled, all QoS functionality can be exercised by the user. When disabled, … |
| 1.3.6.1.4.1.45.4.7.1.11.16 | ntnQosConfigTrustedProcessingMode | 1 | 1 | Controls filter usage related to Trusted interface class processing on platforms using filters to support treating traffic as tru… |
| 1.3.6.1.4.1.45.4.7.1.11.17 | ntnQosConfigResetToPartialDefaults | 1 | 1 | Most installed QoS policy state information can be deleted and reset to the device's default state by setting the value of this o… |