Specifies the maximum amount of time, in seconds,
before non-volatile QoS configuration data will be
written to non-volatile storage. Delaying NV access
can be used to minimize file I/O aiding agent efficiency
if a large amount of QoS data is being configured.
Parsed from file pibNtnEvol_004.mib.txt
Company: baynetworks
Module: NTN-QOS-POLICY-EVOL-PIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
ntnQosConfigNVCommitDelay OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum amount of time, in seconds, before non-volatile QoS configuration data will be written to non-volatile storage. Delaying NV access can be used to minimize file I/O aiding agent efficiency if a large amount of QoS data is being configured." ::= { ntnQosPolicyAgtClasses 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.4.7.1.11.5.0 | ntnQosConfigNVCommitDelay | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.4.7.1.11.1 | ntnQosPrcSupportTable | 1 | 6 | Each instance of this class specifies a PRC that the device supports and a bit string to indicate the attributes of the class tha… |
| 1.3.6.1.4.1.45.4.7.1.11.2 | ntnQosPolicyDeviceIdentTable | 1 | 4 | This class contains a single policy rule instance that contains device-specific information. |
| 1.3.6.1.4.1.45.4.7.1.11.3 | ntnQosConfigResetToDefaults | 1 | 1 | All installed QoS policy state information can be deleted and reset to the device's default state by setting the value of this ob… |
| 1.3.6.1.4.1.45.4.7.1.11.4 | ntnQosConfigTrackStatistics | 1 | 1 | The value of this attribute determines if statistics tracking is enabled for system-level policies. System-level policies are cre… |
| 1.3.6.1.4.1.45.4.7.1.11.6 | ntnQosConfigDefaultQueueCfg | 1 | 1 | The value of this attribute determines the queue set that is associated with all egress interfaces by default. A queue set is char… |
| 1.3.6.1.4.1.45.4.7.1.11.7 | ntnQosConfigDefaultBufferingCaps | 1 | 1 | The value of this attribute determines the method through which buffering resources are allocated to ports sharing a pool of buff… |
| 1.3.6.1.4.1.45.4.7.1.11.8 | ntnQosConfigUBPSupportLevel | 1 | 1 | Determines whether QoS Agent User Based Policy (UBP) support is enabled and, if so, what level of support is enabled. Setting the… |
| 1.3.6.1.4.1.45.4.7.1.11.9 | ntnQosConfigRoleAssocCompatLevel | 1 | 1 | Determines whether interface role associations are subject to loose or strict capabilities verification. Setting the value of thi… |
| 1.3.6.1.4.1.45.4.7.1.11.10 | ntnQosConfigDappEnable | 1 | 1 | Dictates whether the DoS Attack Prevention Package (DAPP) is enabled on all applicable ports and, when enabled, if resources will… |
| 1.3.6.1.4.1.45.4.7.1.11.11 | ntnQosConfigDappMinTcpHdrSize | 1 | 1 | DAPP minimum TCP header length allowed. Used when performing TCP fragment validation. IPv4 TCP first fragment packets will be dro… |
| 1.3.6.1.4.1.45.4.7.1.11.12 | ntnQosConfigDappIpv4IcmpMaxLength | 1 | 1 | DAPP maximum IPv4 ICMP length. Used when performing ICMP validation. IPv4 ICMP packets will be dropped if the length (IP payload)… |
| 1.3.6.1.4.1.45.4.7.1.11.13 | ntnQosConfigDappIpv6IcmpMaxLength | 1 | 1 | DAPP maximum IPv6 ICMP length. Used when performing ICMP validation. IPv6 ICMP packets will be dropped if the length exceeds this… |
| 1.3.6.1.4.1.45.4.7.1.11.14 | ntnQosConfigNtApplicationMode | 1 | 1 | Controls NT Application Mode processing. When enabled, identified NT application traffic will be given preferential treatment ove… |
| 1.3.6.1.4.1.45.4.7.1.11.15 | ntnQosConfigQosOperMode | 1 | 1 | Controls overall QoS processing for the system. When enabled, all QoS functionality can be exercised by the user. When disabled, … |
| 1.3.6.1.4.1.45.4.7.1.11.16 | ntnQosConfigTrustedProcessingMode | 1 | 1 | Controls filter usage related to Trusted interface class processing on platforms using filters to support treating traffic as tru… |
| 1.3.6.1.4.1.45.4.7.1.11.17 | ntnQosConfigResetToPartialDefaults | 1 | 1 | Most installed QoS policy state information can be deleted and reset to the device's default state by setting the value of this o… |