Vendor: Coriolis Networks
Module: DEVICE-MIB
[Automatically extracted from oidview.com]
systime OBJECT IDENTIFIER ::= { device 3 }
systime OBJECT IDENTIFIER ::= { device 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5812.1.3.1 | systimeTimingMode | 1 | 1 | The type of timing used by the device. External (default for OptiFlow 5000) - Primary Clock Source is always BITS1. - Secondary… |
| 1.3.6.1.4.1.5812.1.3.2 | systimePriBITSFraming | 1 | 1 | This is the Primary BITS basic line framing. Default is T1-ESF-4K. t1SF - Super Frame framing method used on T1 circuits. SF c… |
| 1.3.6.1.4.1.5812.1.3.3 | systimeSecBITSFraming | 1 | 1 | This is the Secondary BITS basic line framing. Default is T1-ESF-4K. t1SF - Super Frame framing method used on T1 circuits. SF… |
| 1.3.6.1.4.1.5812.1.3.4 | systimePriBITSCoding | 1 | 1 | This is the primary BITS line coding. Default is B8ZS. Valid when timing_mode is EXT. AMI - Alternate Mask Inversion (valid wh… |
| 1.3.6.1.4.1.5812.1.3.5 | systimeSecBITSCoding | 1 | 1 | This is the seconday BITS line coding. Default is B8ZS. Valid when timing mode is EXT. AMI - Alternate Mask Inversion (valid w… |
| 1.3.6.1.4.1.5812.1.3.6 | systimePriClkSrcId | 1 | 1 | This is the primary timing interface clock. bits1 - Valid when the timing mode is EXT. bits2 - Valid when the timing mode is EXT… |
| 1.3.6.1.4.1.5812.1.3.7 | systimeSecClkSrcId | 1 | 1 | This is the secondary timing interface clock bits1 - Valid when the timing mode is EXT. bits2 - Valid when the timing mode is EXT… |
| 1.3.6.1.4.1.5812.1.3.8 | systimeClkReference | 1 | 1 | Automatic(default) - This automatically selects a Stratum 3 or better clock from the Primary Clock Source, Secondary Clock Sourc… |
| 1.3.6.1.4.1.5812.1.3.9 | systimeClkRevertive | 1 | 1 | Sets the method by which the device (equipment) returns to using the Primary Clock Source after the Primary Clock Source has fai… |
| 1.3.6.1.4.1.5812.1.3.10 | systimeStandbyClkEnable | 1 | 1 | This enables use of standby management module clock reference. It enables using the primary clock source, secondary clock source… |
| 1.3.6.1.4.1.5812.1.3.11 | systimePriCSNVTime | 1 | 1 | Primary Clock Source Normal Validation Time. This is the amount of time required to validate the primary clock source when not i… |
| 1.3.6.1.4.1.5812.1.3.12 | systimeSecCSNVTime | 1 | 1 | Secondary Clock Source Normal Validation Time. This is the amount of time required to validate the secondary clock source when n… |
| 1.3.6.1.4.1.5812.1.3.13 | systimePriCSHVTime | 1 | 1 | Primary Clock Source Holdover Validation Time. This is the amount of time required to validate the primary clock source when in … |
| 1.3.6.1.4.1.5812.1.3.14 | systimeSecCSHVTime | 1 | 1 | Secondary Clock Source Holdover Validation Time. This is the amount of time required to validate the secondary clock source when… |
| 1.3.6.1.4.1.5812.1.3.15 | systimePriCSUseLimit | 1 | 1 | This is the number of times the primary clock source may be used over the time interval primary clock source use interval (systim… |
| 1.3.6.1.4.1.5812.1.3.16 | systimeSecCSUseLimit | 1 | 1 | This is the number of times the secondary clock source may be used over the time interval Secondary clock source use interval (sy… |
| 1.3.6.1.4.1.5812.1.3.17 | systimeStandbyCSUseLimit | 1 | 1 | This is the number of times the standby clock source may be used over the time interval standby clock source use interval (systim… |
| 1.3.6.1.4.1.5812.1.3.18 | systimePriCSUseInterval | 1 | 1 | This is the time interval used to reset the Primary Clock Source used count. Ranges from 1 to 96 hours. Default is 1 hour. |
| 1.3.6.1.4.1.5812.1.3.19 | systimeSecCSUseInterval | 1 | 1 | This is the time interval used to reset the Secondary Clock Source used count. Ranges from 1 to 96 hours. Default is 1 hour. |
| 1.3.6.1.4.1.5812.1.3.20 | systimeStandbyCSUseInterval | 1 | 1 | This is the time interval used to reset the Standby Clock Source used count. Ranges from 1 to 96 hours. Default is 1 hour. |
| 1.3.6.1.4.1.5812.1.3.21 | systimeCREventEnable | 1 | 1 | This generates an alarm when the clock reference used changes from either the primary or the secondary. Default is Enable. |
| 1.3.6.1.4.1.5812.1.3.22 | systimeCRInUse | 1 | 1 | This indicates the current clock reference. Automatic(default) - This automatically selects a Stratum 3 or better clock from the … |
| 1.3.6.1.4.1.5812.1.3.23 | systimeCRUsedCount | 1 | 1 | This indicates the number of times this clock had been used. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5812.1.1 | deviceMIB | 0 | 0 | The MIB module for chassis level information for coriolis boxes |
| 1.3.6.1.4.1.5812.1.2 | chassis | 22 | 46 | None |
| 1.3.6.1.4.1.5812.1.4 | deviceNMSTable | 1 | 7 | A table that contains information about the set of network management stations that are allowed to manage this device |
| 1.3.6.1.4.1.5812.1.5 | sysMemory | 8 | 16 | None |
| 1.3.6.1.4.1.5812.1.6 | sysTask | 1 | 17 | None |