This is the number of times the secondary clock source may be
used over the time interval Secondary clock source use interval
(systimeSecCSUseInterval). It permits several attempts at using
the secondary clock source when prior attempts did not pass the
Stratum 3 requirement. The default is 3 times.
Parsed from file device.mib.txt
Company: None
Module: DEVICE-MIB
This is the number of times the secondary clock source may be
used over the time interval Secondary clock source use interval
(systimeSecCSUseInterval). It permits several attempts at using
the secondary clock source when prior attempts did not pass the
Stratum 3 requirement. The default is 3 times.
Parsed from file DEVICE-MIB.mib
Module: DEVICE-MIB
Vendor: Coriolis Networks
Module: DEVICE-MIB
[Automatically extracted from oidview.com]
systimeSecCSUseLimit OBJECT-TYPE SYNTAX INTEGER(1..999) MAX-ACCESS read-write STATUS current DESCRIPTION " This is the number of times the secondary clock source may be used over the time interval Secondary clock source use interval (systimeSecCSUseInterval). It permits several attempts at using the secondary clock source when prior attempts did not pass the Stratum 3 requirement. The default is 3 times." ::= { systime 16 }
systimeSecCSUseLimit OBJECT-TYPE SYNTAX INTEGER(1..999) MAX-ACCESS read-write STATUS current DESCRIPTION " This is the number of times the secondary clock source may be used over the time interval Secondary clock source use interval (systimeSecCSUseInterval). It permits several attempts at using the secondary clock source when prior attempts did not pass the Stratum 3 requirement. The default is 3 times." ::= { systime 16 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.5812.1.3.16.0 | systimeSecCSUseLimit | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.5812.1.3.1 | systimeTimingMode | 1 | 1 | The type of timing used by the device. External (default for OptiFlow 5000) - Primary Clock Source is always BITS1. - Secondary… |
1.3.6.1.4.1.5812.1.3.2 | systimePriBITSFraming | 1 | 1 | This is the Primary BITS basic line framing. Default is T1-ESF-4K. t1SF - Super Frame framing method used on T1 circuits. SF c… |
1.3.6.1.4.1.5812.1.3.3 | systimeSecBITSFraming | 1 | 1 | This is the Secondary BITS basic line framing. Default is T1-ESF-4K. t1SF - Super Frame framing method used on T1 circuits. SF… |
1.3.6.1.4.1.5812.1.3.4 | systimePriBITSCoding | 1 | 1 | This is the primary BITS line coding. Default is B8ZS. Valid when timing_mode is EXT. AMI - Alternate Mask Inversion (valid wh… |
1.3.6.1.4.1.5812.1.3.5 | systimeSecBITSCoding | 1 | 1 | This is the seconday BITS line coding. Default is B8ZS. Valid when timing mode is EXT. AMI - Alternate Mask Inversion (valid w… |
1.3.6.1.4.1.5812.1.3.6 | systimePriClkSrcId | 1 | 1 | This is the primary timing interface clock. bits1 - Valid when the timing mode is EXT. bits2 - Valid when the timing mode is EXT… |
1.3.6.1.4.1.5812.1.3.7 | systimeSecClkSrcId | 1 | 1 | This is the secondary timing interface clock bits1 - Valid when the timing mode is EXT. bits2 - Valid when the timing mode is EXT… |
1.3.6.1.4.1.5812.1.3.8 | systimeClkReference | 1 | 1 | Automatic(default) - This automatically selects a Stratum 3 or better clock from the Primary Clock Source, Secondary Clock Sourc… |
1.3.6.1.4.1.5812.1.3.9 | systimeClkRevertive | 1 | 1 | Sets the method by which the device (equipment) returns to using the Primary Clock Source after the Primary Clock Source has fai… |
1.3.6.1.4.1.5812.1.3.10 | systimeStandbyClkEnable | 1 | 1 | This enables use of standby management module clock reference. It enables using the primary clock source, secondary clock source… |
1.3.6.1.4.1.5812.1.3.11 | systimePriCSNVTime | 1 | 1 | Primary Clock Source Normal Validation Time. This is the amount of time required to validate the primary clock source when not i… |
1.3.6.1.4.1.5812.1.3.12 | systimeSecCSNVTime | 1 | 1 | Secondary Clock Source Normal Validation Time. This is the amount of time required to validate the secondary clock source when n… |
1.3.6.1.4.1.5812.1.3.13 | systimePriCSHVTime | 1 | 1 | Primary Clock Source Holdover Validation Time. This is the amount of time required to validate the primary clock source when in … |
1.3.6.1.4.1.5812.1.3.14 | systimeSecCSHVTime | 1 | 1 | Secondary Clock Source Holdover Validation Time. This is the amount of time required to validate the secondary clock source when… |
1.3.6.1.4.1.5812.1.3.15 | systimePriCSUseLimit | 1 | 1 | This is the number of times the primary clock source may be used over the time interval primary clock source use interval (systim… |
1.3.6.1.4.1.5812.1.3.17 | systimeStandbyCSUseLimit | 1 | 1 | This is the number of times the standby clock source may be used over the time interval standby clock source use interval (systim… |
1.3.6.1.4.1.5812.1.3.18 | systimePriCSUseInterval | 1 | 1 | This is the time interval used to reset the Primary Clock Source used count. Ranges from 1 to 96 hours. Default is 1 hour. |
1.3.6.1.4.1.5812.1.3.19 | systimeSecCSUseInterval | 1 | 1 | This is the time interval used to reset the Secondary Clock Source used count. Ranges from 1 to 96 hours. Default is 1 hour. |
1.3.6.1.4.1.5812.1.3.20 | systimeStandbyCSUseInterval | 1 | 1 | This is the time interval used to reset the Standby Clock Source used count. Ranges from 1 to 96 hours. Default is 1 hour. |
1.3.6.1.4.1.5812.1.3.21 | systimeCREventEnable | 1 | 1 | This generates an alarm when the clock reference used changes from either the primary or the secondary. Default is Enable. |
1.3.6.1.4.1.5812.1.3.22 | systimeCRInUse | 1 | 1 | This indicates the current clock reference. Automatic(default) - This automatically selects a Stratum 3 or better clock from the … |
1.3.6.1.4.1.5812.1.3.23 | systimeCRUsedCount | 1 | 1 | This indicates the number of times this clock had been used. |