The value of tmnxDS1BerSfThreshold specifies a bit error rate (BER)
threshold used to determine when to send a tmnxEqPortDS1Alarm
notification for a BER SF failure and a tmnxEqPortDS1AlarmClear
notification for a BER SF failure clear. Bit error computed must
reach/exceed threshold value over a pre-defined period of time
for the tmnxEqPortSonetAlarm notification to be sent.
The value of tmnxDS1Framing defines how the bit errors are
computed and what values of tmnxDS1BerSfThreshold are allowed.
The following table defines this dependency:
tmnxDS1Framing Bit error calculation and value supported
esf (1) each CRC error is counted as one bit error
g704 (4) values supported are 1,5,10,50,100
other values bit error alarms not supported, value
of tmnxDS1BerSfThreshold set to default and
cannot be changed
tmnxDS1BerSfThreshold value must not be smaller than
tmnxDS1BerSdThreshold value
Parsed from file TIMETRA-PORT-MIB.mib
Module: TIMETRA-PORT-MIB
tmnxDS1BerSfThreshold OBJECT-TYPE SYNTAX Unsigned32 (1|5|10|50|100) UNITS "error bits in million bits received" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxDS1BerSfThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortDS1Alarm notification for a BER SF failure and a tmnxEqPortDS1AlarmClear notification for a BER SF failure clear. Bit error computed must reach/exceed threshold value over a pre-defined period of time for the tmnxEqPortSonetAlarm notification to be sent. The value of tmnxDS1Framing defines how the bit errors are computed and what values of tmnxDS1BerSfThreshold are allowed. The following table defines this dependency: tmnxDS1Framing Bit error calculation and value supported esf (1) each CRC error is counted as one bit error g704 (4) values supported are 1,5,10,50,100 other values bit error alarms not supported, value of tmnxDS1BerSfThreshold set to default and cannot be changed tmnxDS1BerSfThreshold value must not be smaller than tmnxDS1BerSdThreshold value" DEFVAL { 50 } ::= { tmnxDS1Entry 25 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.1 | tmnxDS1RowStatus | 0 | 0 | tmnxDS1RowStatus controls the creation and deletion of row entries in the tmnxDS1Table. For row creation, the manager has to firs… |
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.2 | tmnxDS1Type | 0 | 0 | The value of tmnxDS1Type indicates whether the DS1 channel is in DS1, E1 or J1 mode. |
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.3 | tmnxDS1Framing | 0 | 0 | The value of tmnxDS1Framing indicates the type of framing associated with the channel: esf ESF (extended super frame) … |
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.4 | tmnxDS1IdleCycleFlags | 0 | 0 | tmnxDS1IdleCycleFlags configures the value that the DS1 channel transmits during idle cycle. |
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.5 | tmnxDS1Loopback | 0 | 0 | tmnxDS1Loopback is used to put the channel into a loopback mode. The value of tmnxPortAdminStatus should be set to 'outOfService… |
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.6 | tmnxDS1InvertData | 0 | 0 | Setting tmnxDS1InvertData to 'true' causes all data bits to be inverted, to guarantee ones density. It is typically used with AMI… |
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.7 | tmnxDS1BitErrorInsertionRate | 0 | 0 | tmnxDS1BitErrorInsertionRate is used to insert bit errors for a BERT test. The number of error corresponds to 10^(-rate). A rate… |
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.8 | tmnxDS1BERTPattern | 0 | 0 | tmnxDS1BERTPattern object indicates the pattern used for the Bit Error Rate Test (BERT). The value of tmnxDS1BERTDuration indicat… |
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.9 | tmnxDS1BERTDuration | 0 | 0 | tmnxDS1BERTDuration is used to set the duration of the BERT test. |
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.10 | tmnxDS1ReportAlarm | 0 | 0 | The value of tmnxDS1ReportAlarm determines when and if to generate notifications for this channel: ais - Reports alarm indication… |
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.11 | tmnxDS1ReportAlarmStatus | 0 | 0 | The value of tmnxDS1ReportAlarmStatus indicates the current alarms on this channel. |
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.12 | tmnxDS1LastChangeTime | 0 | 0 | The tmnxDS1LastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmnxDS1Ent… |
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.13 | tmnxDS1ClockSource | 0 | 0 | tmnxDS1ClockSource configures the clock for transmitted data from either the internal clock ('nodeTimed'), or from a clock recov… |
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.14 | tmnxDS1BERTOperStatus | 0 | 0 | tmnxDS1BERTOperStatus indicates the status of the BERT test as specified by TmnxDSXBertOperStatus. |
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.15 | tmnxDS1BERTSynched | 0 | 0 | tmnxDS1BERTSynched is the number of seconds for which the BERT hardware was synchronized. This will be less than or equal to the … |
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.16 | tmnxDS1BERTErrors | 0 | 0 | tmnxDS1BERTErrors is the number of bit errors detected during the last BERT test. It is valid only after tmnxDS1BERTOperStatus tr… |
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.17 | tmnxDS1BERTTotalBits | 0 | 0 | tmnxDS1BERTTotalBits is the total number of bits received during the last BERT test. Bits are only counted when the BERT hardware… |
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.18 | tmnxDS1RemoteLoopRespond | 0 | 0 | When tmnxDS1RemoteLoopRespond has a value of 'true', the channel is enabled to respond to remote loop signals. When it has a val… |
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.19 | tmnxDS1InRemoteLoop | 0 | 0 | tmnxDS1InRemoteLoop indicates whether the remote end has put this channel in remote loopback. |
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.20 | tmnxDS1InsertSingleBitError | 0 | 0 | tmnxDS1InsertSingleBitError is used to insert a single bit error for a BERT test. |
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.21 | tmnxDS1SignalMode | 0 | 0 | The value of tmnxDS1SignalMode indicates the type of signalling associated with the channel: none - Indicates no signalling on t… |
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.22 | tmnxDS1ClockSyncState | 0 | 0 | The value of tmnxDS1ClockSyncState indicates the current clock synchronization state if tmnxDS1ClockSource is 'adaptive' or 'diff… |
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.23 | tmnxDS1ClockMasterPortId | 0 | 0 | The value of tmnxDS1ClockMasterPortId indicates the current clock synchronization master port id if tmnxDS1ClockSource is 'adapt… |
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.24 | tmnxDS1BerSdThreshold | 0 | 0 | The value of tmnxDS1BerSdThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortDS1Alar… |