OID reference
1.3.6.1.4.1.9839.2.1.1.17
Maintenance Schedule Due alarm
Identification
{1 3 6 1 4 1 9839 2 1 1 17}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.9839.2.1.1.17.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 17 distinct definitions; some records may not include a definition.
night_reg_probe OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Night-time control with 3rd probe"
DEFVAL { 0 }
::= { digitalObjects 17 }sbrinam_on OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Defrost in progress"
::= { digitalObjects 17 }al_comp_ol OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Compressor overheat"
::= { digitalObjects 17 }rich_parz14 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of capacity-control 1 compressor 4"
::= { digitalObjects 17 }modo_speciale OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "“Special” mode of operation"
DEFVAL { 0 }
::= { digitalObjects 17 }cont_avv_a2 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Compressor 2"
::= { digitalObjects 17 }defrost_st_1 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Executing C1 defrost"
::= { digitalObjects 17 }dout_8 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Digital output n.8"
::= { digitalObjects 17 }modo_speciale OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "“special” mode of operation"
DEFVAL { 0 }
::= { digitalObjects 17 }maint-alm OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maintenance Schedule Due alarm"
DEFVAL { 0 }
::= { digitalObjects 17 }sbrinamento_on OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Defrost in progress"
::= { digitalObjects 17 }minmax_store_enable OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "flag"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable Min and Max temperatur monitorin"
DEFVAL { 0 }
::= { digitalObjects 17 }compressor6 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "State of the compressor 6."
::= { digitalObjects 17 }en_b2 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Enable probe 2"
::= { digitalObjects 17 }mal-eap OBJECT-TYPE
SYNTAX Integer32
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Alarm: Room High/Low Temp./Humid.(Ext. Devices)"
::= { digitalObjects 17 }al-q-comp6 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Overload compressor 3 circuit 2 alarm"
::= { digitalObjects 17 }parz2 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Compressor 2 capacity control / Integrated humidifier loading"
::= { digitalObjects 17 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
Night-time control with 3rd probe
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 3
Defrost in progress
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 4
Compressor overheat
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 5
Status of capacity-control 1 compressor 4
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 6
“Special” mode of operation
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 7
Compressor 2
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 8
Executing C1 defrost
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 9
Digital output n.8
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 10
“special” mode of operation
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 11
Enable Min and Max temperatur monitorin
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 12
State of the compressor 6.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 13
Enable probe 2
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 14
Alarm: Room High/Low Temp./Humid.(Ext. Devices)
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 15
Overload compressor 3 circuit 2 alarm
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 16
Compressor 2 capacity control / Integrated humidifier loading
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: night_reg_probe
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"night_reg_probe",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Night-time control with 3rd probe\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"digitalObjects",
"17",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Night-time control with 3rd probe"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-powersplit-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Status in source: current.
Names: sbrinam_on
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"sbrinam_on",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Defrost in progress\"",
"::=",
"{",
"digitalObjects",
"17",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Defrost in progress"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mcella-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: sbrinamento_on
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"sbrinamento_on",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Defrost in progress\"",
"::=",
"{",
"digitalObjects",
"17",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Defrost in progress"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uchiller_cmp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: al_comp_ol
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"al_comp_ol",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Compressor overheat\"",
"::=",
"{",
"digitalObjects",
"17",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Compressor overheat"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uac-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: rich_parz14
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rich_parz14",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Status of capacity-control 1 compressor 4\"",
"::=",
"{",
"digitalObjects",
"17",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Status of capacity-control 1 compressor 4"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-fcp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: modo_speciale
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"modo_speciale",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"“Special” mode of operation\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"digitalObjects",
"17",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"“Special” mode of operation"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-ir32un_ap-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: cont_avv_a2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"cont_avv_a2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Compressor 2\"",
"::=",
"{",
"digitalObjects",
"17",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Compressor 2"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-rtop_pco-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: defrost_st_1
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"defrost_st_1",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Executing C1 defrost\"",
"::=",
"{",
"digitalObjects",
"17",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Executing C1 defrost"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uchiller-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: dout_8
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dout_8",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Digital output n.8\"",
"::=",
"{",
"digitalObjects",
"17",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Digital output n.8"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mod_ch-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: modo_speciale
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"modo_speciale",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"“special” mode of operation\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"digitalObjects",
"17",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"“special” mode of operation"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-ir32un_t-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: maint-alm
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"maint-alm",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Maintenance Schedule Due alarm\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"digitalObjects",
"17",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Maintenance Schedule Due alarm"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the LibreNMS archive.
Module: DataAire-dap4-al-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: DataAire-dap4-al-MIB
Same published definition (formatting differs; exact original is in the source file)
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: minmax_store_enable
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"minmax_store_enable",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"22666c616722"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Enable Min and Max temperatur monitorin\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"digitalObjects",
"17",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"flag"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Enable Min and Max temperatur monitorin"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mastercellasplit-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: compressor6
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"compressor6",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"State of the compressor 6.\"",
"::=",
"{",
"digitalObjects",
"17",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"State of the compressor 6."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-insgrd-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: en_b2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"en_b2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Enable probe 2\"",
"::=",
"{",
"digitalObjects",
"17",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Enable probe 2"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-screw_compressor-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: mal-eap
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mal-eap",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Alarm: Room High/Low Temp./Humid.(Ext. Devices)\"",
"::=",
"{",
"digitalObjects",
"17",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Alarm: Room High/Low Temp./Humid.(Ext. Devices)"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: UNCDZ-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: al-q-comp6
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"al-q-comp6",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Overload compressor 3 circuit 2 alarm\"",
"::=",
"{",
"digitalObjects",
"17",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Overload compressor 3 circuit 2 alarm"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: KELVIN-pCOWeb-Chiller-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Same file in Observium Community.
Status in source: current.
Names: parz2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"parz2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Compressor 2 capacity control / Integrated humidifier loading\"",
"::=",
"{",
"digitalObjects",
"17",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Compressor 2 capacity control / Integrated humidifier loading"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-cdz_pco-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9839.2.1.1.1 | systemOn, al-pa1, dehum-on, vent-on, ciclo_continuo, on_off_status, cent_fhren_flag, diginput1, stato_id_1, device1, est_inv, syson_s, id1, z1, unit_meas__5, buz, scheda_modem, res_antig_c1, dig_output1 | 0 | 0 | System On (Fan) |
| 1.3.6.1.4.1.9839.2.1.1.2 | compressore1, al-pa2, hum-on, ventilatori, comp1, en_dec_point, autoscale, diginput2, stato_id_2, device2, on_off_unita, dout_1, id2, en_alm_ed_r3, cf, present_expansion, dig_output2 | 0 | 0 | Compressor 1 |
| 1.3.6.1.4.1.9839.2.1.1.3 | compressore2, al-pb1, engy-on, al_eeprom, comp2, defrost_con_sonda_3, defrostprobeselect, alrlowbatt, stato_ud_1, device3, dout_2, id3, z3, fan_mode_f0, mtd1, fan1, valv_inv_c1, dig_output3 | 0 | 0 | Compressor 2 |
| 1.3.6.1.4.1.9839.2.1.1.4 | compressore3, al-pb2, cool-inhibit, al_b1_ko, compressor, comp3, enable_ed_alarm, sel_probe_term, alrprobefault, stato_ud_2, device4, dout_3, reset_allarmi, z4, start_def_on_d4, mtd2, defrost_cmd, fan2, dig_output4 | 0 | 0 | Compressor 3 |
| 1.3.6.1.4.1.9839.2.1.1.5 | compressore4, heat-held, al_b2_ko, aux_out, enable_monitor_temp_maxmin, pd_autostart_enable, stato_ud_3, device5, allarme_hp, dout_4, reset_hardware, z5, stop_vis_def_d6, defrost_at_startup, fan3, allarme | 0 | 0 | Compressor 4 |
| 1.3.6.1.4.1.9839.2.1.1.6 | heating1, al-le, humidifier-inhibit, al_b3_ko, out-h1, valv_inv_ciclo, regol_notturna_sonda_3, defrost_cmd, alrhightempprobe1, stato_ud_4, device6, allarme_lp, dout_5, forza_invio_parametri, z6, def_priority_d9, defrost_show, fan4, antifreeze_resist_c2 | 0 | 0 | Heating 1 |
| 1.3.6.1.4.1.9839.2.1.1.7 | heating2, dehum-inhibit, al_b4_ko, out-h2, vent1, disable_pid, defrost_at_startup, alrhightempprobe2, device7, dout_6, stato_uscite_remoto, z7, time_base_dc, mtd5, defrost_priority, comp1, compressore_c2 | 0 | 0 | Heating 2 |
| 1.3.6.1.4.1.9839.2.1.1.8 | rht-during-dehum, al-idrofrigo-fl1, al_clock, out-h3, all_eeprom, vent2, en_exenq_5, defrost_show, alrlowtempprobe1, all_sonda_0, device8, all_flusso, start_stop, dout_7, buzzer, onr, fan_cmp_off_f2, mtd6, fan_cfg, rich_parz11, valv_inv_c2 | 0 | 0 | reheat during dehum |
| 1.3.6.1.4.1.9839.2.1.1.9 | hotGasCoil, static-press-alarm, floor-wtr-alm, al_hp_ckt1, gas-caldo-on, all_timeout_def, vent3, pressure_probe_from_master, defrost_priority, alrlowtempprobe2, all_sonda_1, device9, err_sonda_b3, dout_8, allarme_remoto, z9, fan_off_def_f3, rele1_pwup, fan_off_ctrl, rich_parz21, err_sonda_s1 | 0 | 0 | Hot Gas Coil |
| 1.3.6.1.4.1.9839.2.1.1.10 | dehumidification, w-static-press-alarm, air-flow-alm, al_hp_ckt2, on-deum, all_bassa_temp, fan_cfg, hightempalrenabled, all_eeprom, device10, err_sonda_b2, dout_1, dout_9, id1_remoto, z10, dis_buzzer_h4, fan_defrost_ctrl, comp2, err_sonda_s2 | 0 | 0 | Dehumidification |
| 1.3.6.1.4.1.9839.2.1.1.11 | humidification, flow-value-alarm, filter-alm, al_lp_ckt1, power, all_alta_temp, fan_off_ctrl, diginputpol1, all_id_1, err_sonda_b1, dout_2, dout_10, id2_remoto, z12, dis_keyb_h2, keyb_disabled, rich_parz12, err_sonda_s3, dig_input1 | 0 | 0 | Humidification |
| 1.3.6.1.4.1.9839.2.1.1.12 | emerg, al-q-comp1, humidifier-alm, al_lp_ckt2, mal-access, all_sonda_amb, sys_on, fan_defrost_ctrl, diginputpol2, all_alta_temp, compressor1, dout_3, dout_11, id3_remoto, val_par, vis_probe__4, loc_on_off_ena, rich_parz22, err_sonda_s4, dig_input2 | 0 | 0 | Main Power Loss |
| 1.3.6.1.4.1.9839.2.1.1.13 | firestat-alm, al-q-comp2, al_flow_sw, mal-ata, all_sonda_def, mask_term_klix1, keyb_disabled, alrdefrost, all_bassa_temp, compressor2, err_eeprom_s, dout_4, dout_12, stato_regolazione, syson2, buzz_pwup, lan_on_off_ena, comp3, err_sonda_s5 | 0 | 0 | Temperature of return air above firestat alarm set point |
| 1.3.6.1.4.1.9839.2.1.1.14 | shortcycle-alm, al-q-comp3, al_clogged_fl, mal-bta, all_imm_ai, mask_term_klix2, prop_prop_int, compressor3, dout_5, dout_13, sbrinamento_manuale, val_es_ok, di1, lan_din, rich_parz13, err_eeprom | 0 | 0 | One or more comps has short cycled |
| 1.3.6.1.4.1.9839.2.1.1.15 | humidity-fail, al-q-comp4, al_heaters_ol, mal-aua, all_rit_ad, mask_term_klix3, tipo_sonda, compressor4, dout_6, ventilatore_p, en_evap_flow_al, forzatura_on, umidifica, di2, defrost_tout_alarm_ena, rich_parz23, freq_rete | 0 | 0 | Sensor is out of range |
| 1.3.6.1.4.1.9839.2.1.1.16 | ret-air-fail, al-q-comp5, al_fan_ol, mal-bua, defrost_tout_alarm_ena, celsius_farhan, compressor5, all_termin_off, dout_7, cont_avv_a1, en_b1, parz1, minmax_store_enable, comp4, allarme_terminale_disconnesso | 0 | 0 | Sensor is out of range |
| 1.3.6.1.4.1.9839.2.1.1.18 | c1-hp-alm, al-q-fan-1, al_freecool, mal-filter, night_reg_probe, tipo_out_grad4, compressor7, all_sbrinamento, dout_9, en_b3, valfre, al_probe1, di5, haccp_reset, rich_parz24 | 0 | 0 | High pressure alarm |
| 1.3.6.1.4.1.9839.2.1.1.19 | c1-lp-alm, al-q-fan-2, al_humidif, mal-flood, haccp_reset, tipo_out_grad3, compressor8, all_antigelo, dout_10, en_b4, valfre1, al_probe2, di6, comp5, defrost_st_2 | 0 | 0 | Low pressure alarm |
| 1.3.6.1.4.1.9839.2.1.1.20 | alarmAccess, al-q-fan11, c2-hp-alm, al_room_lt, mal-flux, tipo_out_grad2, compressor9, all_agelo_sonda, dout_11, resistenza1, en_b5, valca, al_ext_id, ag, rich_parz15, all_h_press_c1 | 0 | 0 | Tampering Alarm |
| 1.3.6.1.4.1.9839.2.1.1.21 | alarmRoomHT, al-q-fan12, c2-lp-alm, al_room_ht, mal-heater, tipo_out_grad1, compressor10, all_sovratens, dout_12, resistenza2, en_b6, valca1, al_low_temp, at1h, rich_parz25, all_l_press_c1, ko_b1 | 0 | 0 | Alarm: Room High Temperature |
| 1.3.6.1.4.1.9839.2.1.1.22 | alarmRoomLT, al-q-fan13, smoke-alm, al_room_lh, mal-hp1, compressor11, all_sottotens, dout_13, umidifica, en_b7, glb_al, al_hi_temp, at1l, comp6, all_term_compc1, ko_b2 | 0 | 0 | Alarm: Room Low Temperature |
| 1.3.6.1.4.1.9839.2.1.1.23 | alarmRoomHH, al-q-fan14, wtr-flow-alm, al_room_hh, mal-hp2, mask_dif_olio1, fan1, ventilatore1, en_b8, s_firmanook, al_ee, at2h, rich_parz16, all_term_fanc1, id_al_immdt_sel | 0 | 0 | Alarm: Room High Humidity |
| 1.3.6.1.4.1.9839.2.1.1.24 | alarmRoomLH, al-q-fan21, disch-air-fail, al_generic_ext, mal-lp1, mask_dif_olio2, fan2, ventilatore2, superv_onoff, s_error_io, at2l, rich_parz26, all_flusso, id_al_dlyd_sel | 0 | 0 | Alarm: Room Low Humidity |
| 1.3.6.1.4.1.9839.2.1.1.25 | alarmRoomEAP, al-q-fan22, ra-tmp-hi-alm, al_fan_maint, mal-lp2, mask_dif_olio3, fan3, stato_pompa, en_start_restr, s_bp1, at3h, din1, lowt | 0 | 0 | Room T+H Limits by External Sensors |
| 1.3.6.1.4.1.9839.2.1.1.26 | alarmFilter, al-q-fan-23, ra-tmp-lo-alm, al_filter_maint, mal-phase, c_f__5, fan4, stato_compress, glb_al, en_modulation, s_bp2, comp_status, at3l, din2, est_inv, hight | 0 | 0 | Alarm: Clogged Filter |
| 1.3.6.1.4.1.9839.2.1.1.27 | alarmFlood, al-q-fan24, hum-hi-alm, al_comp1_maint, mal-smoke, en_ed_alarm, fan5, stato_resists, mask_term1, sun_win_sel, s_fl1, fan_status, at4h, din3, all_h_press_c2, def_al | 0 | 0 | Alarm: Water Leakage Detected |
| 1.3.6.1.4.1.9839.2.1.1.28 | alarmAirFlow, al-idrofrigo-pump1, hum-lo-alm, al_comp2_maint, mal-lan, mask_pres_lpres, fan6, stato_valvola, master, mask_term2, s_trf, defrost_status, at4l, din4, all_l_press_c2 | 0 | 0 | Alarm: Loss of Air Flow |
| 1.3.6.1.4.1.9839.2.1.1.29 | alarmHeater, al-idrofrigo-pump2, fan-overload, al_low_c_ee, mal-hcurr, def_uni_up, mask_pres_hpres, fan7, slave, mask_press_h1, cooling_heating, s_trs1, aux_status, af1, dig_in_1, din5, all_term_compc2 | 0 | 0 | Alarm: Heater Overheating |
| 1.3.6.1.4.1.9839.2.1.1.30 | alarmHP1, al-phase-cont, stdby-pump-on, al_volt_lack, mal-nopower, def_pri, mask_liv_liq, fan8, stato_ventils, en_b1, mask_press_h2, inverter, s_trs2, af2, dig_in_2, din6, all_term_fanc2 | 0 | 0 | Alarm: Circuit 1 High Pressure |
| 1.3.6.1.4.1.9839.2.1.1.31 | alarmHP2, al-door-sw, cust-msg-sw1, al_smoke_fire, mal-nowater, time_base_dc, fan9, en_b2, mask_antigelo, s_fsa, din7 | 0 | 0 | Alarm: Circuit 1 High Pressure |
| 1.3.6.1.4.1.9839.2.1.1.32 | alarmLP1, compressor-FlowRate, cust-msg-sw2, mal-cw-dh, mask_term_vent1, fan10, en_b3, mask_q14, s_flt, din8, rich_manut_c2 | 0 | 0 | Alarm: Circuit 1 Low Pressure |
| 1.3.6.1.4.1.9839.2.1.1.33 | alarmLP2, setpoint-inv-pumps, cust-msg-sw3, unit_status, mal-tc-cw, stop_fan_f2, mask_term_vent2, fan11, en_b4, mask_q15, s_all_h_temp, af5, s_comp, din9, all_antigelo_c1 | 0 | 0 | Alarm: Circuit 2 Low Pressure |
| 1.3.6.1.4.1.9839.2.1.1.34 | alarmEXV1, enable-pumps-redundance, cust-msg-sw4, comp1_status, mal-wflow, stop_fan_f3, mask_term_vent3, en_b5, mask_q3, s_all_l_temp, af6, s_fan, din10, all_antigelo_c2 | 0 | 0 | Alarm: Circuit 1 Electronic Valve Failure |
| 1.3.6.1.4.1.9839.2.1.1.35 | alarmEXV2, enable-chiller-redundance, humsw-inhibit, comp2_status, mal-wht, s_comp, en_b6, mask_q4, s_all_h_umid, di_glb_status, as1, s_defrost, din11, all_defrost_c1 | 0 | 0 | Alarm: Circuit 2 Electronic Valve Failure |
| 1.3.6.1.4.1.9839.2.1.1.36 | alarmPSE, status-in-alarm, heat-inhibit, heater1_status, mal-sonda-ta, s_fan, en_b7, mask_q5, s_all_l_umid, instr_connect, as2, s_aux_2, din12, all_defrost_c2 | 0 | 0 | Alarm: Wrong Phase Sequence |
| 1.3.6.1.4.1.9839.2.1.1.37 | alarmSmokeFire, compressor-recovery, rht-hum-inhibit, heater2_status, mal-sonda-tac, mask_ore_comp1, s_defrost, en_b8, mask_q6, s_al_ore_comp1, al_low_voltage, as3, s_alarm, din13, tsonda_inev__1, lost1 | 0 | 0 | Alarm: SMOKE-FIRE DETECTED |
| 1.3.6.1.4.1.9839.2.1.1.38 | alarmLAN, enable-thermal-redundance, disch-tmp-lo-alm, fan_status, mal-sonda-tc, mask_ore_comp2, s_aux_2, bassa_press1, s_al_ore_comp2, i2c_int_fail, as4, din14, tsonda_outev__2, lost2 | 0 | 0 | Interrupted LAN Alarm |
| 1.3.6.1.4.1.9839.2.1.1.39 | alarmHUHC, enable-multi-pumps-function, override-alm, deshum_status, mal-sonda-te, m_def, mask_ore_comp3, bassa_press2, s_al_ore_umidif, ahw, s_light, din15, lost3 | 0 | 0 | Alarm: Humidifier High Current |
| 1.3.6.1.4.1.9839.2.1.1.40 | alarmHUPL, enable-pumps-offline, condensation-alm, mal-sonda-tm, unita_misura, main_pump, mask_interbl, s_al_ore_mac, td1, dr_supervisor, din16, out_per_fan_f1, lost4 | 0 | 0 | Alarm: Humidifier Power Loss |
| 1.3.6.1.4.1.9839.2.1.1.41 | alarmHUWL, enable-3way-valve, unit-in-standby, humid_on, mal-sonda-ua, out_per_fan_f1, cond_pump, mask_defrost1, s_al_ore_res1, td2, dr_svendreq, din17, defr_antig_d1, lost5 | 0 | 0 | Alarm: Humidifier Water Loss |
| 1.3.6.1.4.1.9839.2.1.1.42 | alarmCWDHT, enable-speed-up-FCM, cw-sns-fail, mal-ore-compr1, int_display, mask_alta_mand, all_alta_temp, mal_maint_dev1, esecuz_sbrin_d1, superv_onoff, mask_defrost2, s_al_ore_res2, din18, lostm | 0 | 0 | Alarm: CW Temperature too High for Dehumidification |
| 1.3.6.1.4.1.9839.2.1.1.43 | alarmCWF, enable-soft-start-FCM, humsw-chk-cyl, mal-ore-compr2, en_max_min, mask_alta_asp, all_bassa_temp, mal_maint_dev2, def_time_tmp_d2, mask_filtro, s_all_h_free, all_pres_lpres, num_fan_h2, rtc_al | 0 | 0 | Alarm: CW Valve Failure or Water Flow too Low |
| 1.3.6.1.4.1.9839.2.1.1.44 | alarmCWFF, enable-freecooling, bms-cooling-inhibit, mal-ore-compr3, blocco_vis_sbrin, all_clean_management, mal_maint_dev3, res_gelo_sbr_db, sum_win_sup, mask_term_res, s_all_l_free, td5, a1_e1, all_pres_hpres, num_evap_h3 | 0 | 0 | Alarm: Loss of Water Flow |
| 1.3.6.1.4.1.9839.2.1.1.45 | alarmCWHT, enable-rot-FIFO-FC, bms-heat-inhibit, al_fan1_ol, mal-ore-compr4, all_def_tout, mal_maint_dev4, en_sonda_res_a6, en_pompacalore, s_sonda1_ko, td6, a1_e2, din101, compr_parz_h4, rem1 | 0 | 0 | Alarm: High Chilled Water Temperature |
| 1.3.6.1.4.1.9839.2.1.1.46 | alarmRTS, enable-HT-function, bms-humidifier-inhibit, al_fan2_ol, mal-ore-filtro, mask_ora, all_driver_lan, mal_maint_dev5, all_lp_sonda_p7, en_freecooling, en_orologio, mal_freeze, s_sonda2_ko, ct, a1_e3, din102, en_din_e_i_h6, rem2 | 0 | 0 | Alarm: Room Temp. Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.47 | alarmHWS, enable-PID-Fc-valve, bms-dehum-inhibit, mal-ore-risc1, all_driver_probe_1, dr_supervisor, mal_maint_dev6, en_id_on_off_h7, en_aa_unit, en_umidita, mal_comp, s_sonda4_ko, buzz, a1_ia, din103, en_din_a_s_h7, rem3 | 0 | 0 | Alarm: Hot Water Temp. Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.48 | alarmCWS, enable-Fc-Thermal-Exclusion, fan-inhibit-bms, mal-ore-risc2, mask_epromnook, all_driver_probe_2, dr_svendreq, mal_maint_dev7, all_lp_comp_pa, en_ww_unit, en_mandata, mal_evap_flow, s_sonda6_ko, rele1_stato, a1_da, din104, num_termin_h8, rem4 | 0 | 0 | Alarm: Chilled Water Temp. Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.49 | alarmOTS, manual-Reset-Ext-Drycooler-Alarm, hum-expect, on_off, mal-ore-umid, mask_bassa_asp, mal_maint_dev8, en_set2_hc, sum_win_sel, mal_cond_flow, s_sondau_ko, a1_ea, din105, num_compressori, rem5 | 0 | 0 | Alarm: Outdoor Temperature Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.50 | alarmDTS, enable-static-press-Alarm, usashr-f-c, measunit, mal-ore-unit, all_duty_set, mal_maint_dev9, inv_est_inv_hd, en_sum_win, en_supervisore, mal_high_press, a1_re, din106, comp_rot_r5 | 0 | 0 | Alarm: Delivery Air Temp. Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.51 | alarmRHS, manual-reset-static-press-Alarm, glb-al, glb_al, all_ext_del, a1_e1, mal_maint_dev10, sel_rele_all_hf, cooling_heating, en_stampante, mal_oil_level, s_epromnook, a1_id, din107, def_ext_da | 0 | 0 | Alarm: Room Humidity Sensor Failed/Disconnected |