OID reference
1.3.6.1.4.1.9839.2.1.1.43
Alarm: CW Valve Failure or Water Flow too Low
Identification
{1 3 6 1 4 1 9839 2 1 1 43}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.9839.2.1.1.43.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 15 distinct definitions; some records may not include a definition.
mal-ore-compr2 OBJECT-TYPE
SYNTAX Integer32
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Service Alarm: Compressor 2 hour counter threshold"
::= { digitalObjects 43 }all_bassa_temp OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Alarm low temperature virtual probe (LO)"
DEFVAL { 0 }
::= { digitalObjects 43 }rtc_al OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Real time clock error"
::= { digitalObjects 43 }enable-soft-start-FCM OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable soft-start FCM"
::= { digitalObjects 43 }mask_alta_asp OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "High suction pressure"
::= { digitalObjects 43 }def_time_tmp_d2 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "flag"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Timed or temperature-based defrosting"
DEFVAL { 0 }
::= { digitalObjects 43 }num_fan_h2 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "flag"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of ventilating circuits"
DEFVAL { 1 }
::= { digitalObjects 43 }mal_maint_dev2 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Exceeded threshold of the device 2 operation hours"
::= { digitalObjects 43 }humsw-chk-cyl OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Humidifier stopped due to custom alarm switch"
DEFVAL { 0 }
::= { digitalObjects 43 }en_max_min OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "flag"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable Min and Max temperature monitorin"
DEFVAL { 0 }
::= { digitalObjects 43 }mask_filtro OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Clogged filter alarm"
::= { digitalObjects 43 }all_pres_lpres OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Low pressure switch alarm"
::= { digitalObjects 43 }en_max_min OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "flag"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable Min and Max temperature monitoring"
DEFVAL { 0 }
::= { digitalObjects 43 }alarmCWF OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Alarm: CW Valve Failure or Water Flow too Low"
::= { digitalObjects 43 }s_all_h_free OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "High temperature outlet water alarm"
::= { digitalObjects 43 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
Service Alarm: Compressor 2 hour counter threshold
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 3
Alarm low temperature virtual probe (LO)
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 4
Real time clock error
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 5
Enable soft-start FCM
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 6
High suction pressure
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 7
Timed or temperature-based defrosting
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 8
Number of ventilating circuits
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 9
Exceeded threshold of the device 2 operation hours
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 10
Humidifier stopped due to custom alarm switch
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 11
Enable Min and Max temperature monitorin
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 12
Clogged filter alarm
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 13
Low pressure switch alarm
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 14
Enable Min and Max temperature monitoring
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 15
High temperature outlet water alarm
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: mal-ore-compr2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mal-ore-compr2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Service Alarm: Compressor 2 hour counter threshold\"",
"::=",
"{",
"digitalObjects",
"43",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Service Alarm: Compressor 2 hour counter threshold"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: UNCDZ-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Status in source: current.
Names: all_bassa_temp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"all_bassa_temp",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Alarm low temperature virtual probe (LO)\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"digitalObjects",
"43",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Alarm low temperature virtual probe (LO)"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mastercase-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: rtc_al
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rtc_al",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Real time clock error\"",
"::=",
"{",
"digitalObjects",
"43",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Real time clock error"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-irmpx-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
· Download CAREL-irmpx-MIBStatus in source: current.
Names: enable-soft-start-FCM
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"enable-soft-start-FCM",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Enable soft-start FCM\"",
"::=",
"{",
"digitalObjects",
"43",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Enable soft-start FCM"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: KELVIN-pCOWeb-Chiller-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Same file in Observium Community.
Status in source: current.
Names: mask_alta_asp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mask_alta_asp",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"High suction pressure\"",
"::=",
"{",
"digitalObjects",
"43",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"High suction pressure"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-cfp_ncp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: def_time_tmp_d2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"def_time_tmp_d2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"22666c616722"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Timed or temperature-based defrosting\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"digitalObjects",
"43",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"flag"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Timed or temperature-based defrosting"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uchiller_cmp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: num_fan_h2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"num_fan_h2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"22666c616722"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Number of ventilating circuits\"",
"DEFVAL",
"{",
"1",
"}",
"::=",
"{",
"digitalObjects",
"43",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"flag"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Number of ventilating circuits"
],
null,
null,
null,
[
"DEFVAL",
1
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uchiller-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: mal_maint_dev2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mal_maint_dev2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Exceeded threshold of the device 2 operation hours\"",
"::=",
"{",
"digitalObjects",
"43",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Exceeded threshold of the device 2 operation hours"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-insgrd-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: humsw-chk-cyl
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"humsw-chk-cyl",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Humidifier stopped due to custom alarm switch\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"digitalObjects",
"43",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Humidifier stopped due to custom alarm switch"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the LibreNMS archive.
Module: DataAire-dap4-al-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Vendor MIB copy from the Observium Community archive.
Module: DataAire-dap4-al-MIB
Same published definition (formatting differs; exact original is in the source file)
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: en_max_min
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"en_max_min",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"22666c616722"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Enable Min and Max temperature monitorin\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"digitalObjects",
"43",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"flag"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Enable Min and Max temperature monitorin"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-ir_32-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: mask_filtro
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mask_filtro",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Clogged filter alarm\"",
"::=",
"{",
"digitalObjects",
"43",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Clogged filter alarm"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-rtop_pco-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: all_pres_lpres
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"all_pres_lpres",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Low pressure switch alarm\"",
"::=",
"{",
"digitalObjects",
"43",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Low pressure switch alarm"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-fcp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: en_max_min
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"en_max_min",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"22666c616722"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Enable Min and Max temperature monitoring\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"digitalObjects",
"43",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"flag"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Enable Min and Max temperature monitoring"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mcella-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: alarmCWF
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"alarmCWF",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Alarm: CW Valve Failure or Water Flow too Low\"",
"::=",
"{",
"digitalObjects",
"43",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Alarm: CW Valve Failure or Water Flow too Low"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: CAREL-ug40cdz-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'RFC1213-MIB': ['DisplayString'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Same file in Observium Community.
Status in source: current.
Names: s_all_h_free
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"s_all_h_free",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"High temperature outlet water alarm\"",
"::=",
"{",
"digitalObjects",
"43",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"High temperature outlet water alarm"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-cdz_pco-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9839.2.1.1.1 | systemOn, al-pa1, dehum-on, vent-on, ciclo_continuo, on_off_status, cent_fhren_flag, diginput1, stato_id_1, device1, est_inv, syson_s, id1, z1, unit_meas__5, buz, scheda_modem, res_antig_c1, dig_output1 | 0 | 0 | System On (Fan) |
| 1.3.6.1.4.1.9839.2.1.1.2 | compressore1, al-pa2, hum-on, ventilatori, comp1, en_dec_point, autoscale, diginput2, stato_id_2, device2, on_off_unita, dout_1, id2, en_alm_ed_r3, cf, present_expansion, dig_output2 | 0 | 0 | Compressor 1 |
| 1.3.6.1.4.1.9839.2.1.1.3 | compressore2, al-pb1, engy-on, al_eeprom, comp2, defrost_con_sonda_3, defrostprobeselect, alrlowbatt, stato_ud_1, device3, dout_2, id3, z3, fan_mode_f0, mtd1, fan1, valv_inv_c1, dig_output3 | 0 | 0 | Compressor 2 |
| 1.3.6.1.4.1.9839.2.1.1.4 | compressore3, al-pb2, cool-inhibit, al_b1_ko, compressor, comp3, enable_ed_alarm, sel_probe_term, alrprobefault, stato_ud_2, device4, dout_3, reset_allarmi, z4, start_def_on_d4, mtd2, defrost_cmd, fan2, dig_output4 | 0 | 0 | Compressor 3 |
| 1.3.6.1.4.1.9839.2.1.1.5 | compressore4, heat-held, al_b2_ko, aux_out, enable_monitor_temp_maxmin, pd_autostart_enable, stato_ud_3, device5, allarme_hp, dout_4, reset_hardware, z5, stop_vis_def_d6, defrost_at_startup, fan3, allarme | 0 | 0 | Compressor 4 |
| 1.3.6.1.4.1.9839.2.1.1.6 | heating1, al-le, humidifier-inhibit, al_b3_ko, out-h1, valv_inv_ciclo, regol_notturna_sonda_3, defrost_cmd, alrhightempprobe1, stato_ud_4, device6, allarme_lp, dout_5, forza_invio_parametri, z6, def_priority_d9, defrost_show, fan4, antifreeze_resist_c2 | 0 | 0 | Heating 1 |
| 1.3.6.1.4.1.9839.2.1.1.7 | heating2, dehum-inhibit, al_b4_ko, out-h2, vent1, disable_pid, defrost_at_startup, alrhightempprobe2, device7, dout_6, stato_uscite_remoto, z7, time_base_dc, mtd5, defrost_priority, comp1, compressore_c2 | 0 | 0 | Heating 2 |
| 1.3.6.1.4.1.9839.2.1.1.8 | rht-during-dehum, al-idrofrigo-fl1, al_clock, out-h3, all_eeprom, vent2, en_exenq_5, defrost_show, alrlowtempprobe1, all_sonda_0, device8, all_flusso, start_stop, dout_7, buzzer, onr, fan_cmp_off_f2, mtd6, fan_cfg, rich_parz11, valv_inv_c2 | 0 | 0 | reheat during dehum |
| 1.3.6.1.4.1.9839.2.1.1.9 | hotGasCoil, static-press-alarm, floor-wtr-alm, al_hp_ckt1, gas-caldo-on, all_timeout_def, vent3, pressure_probe_from_master, defrost_priority, alrlowtempprobe2, all_sonda_1, device9, err_sonda_b3, dout_8, allarme_remoto, z9, fan_off_def_f3, rele1_pwup, fan_off_ctrl, rich_parz21, err_sonda_s1 | 0 | 0 | Hot Gas Coil |
| 1.3.6.1.4.1.9839.2.1.1.10 | dehumidification, w-static-press-alarm, air-flow-alm, al_hp_ckt2, on-deum, all_bassa_temp, fan_cfg, hightempalrenabled, all_eeprom, device10, err_sonda_b2, dout_1, dout_9, id1_remoto, z10, dis_buzzer_h4, fan_defrost_ctrl, comp2, err_sonda_s2 | 0 | 0 | Dehumidification |
| 1.3.6.1.4.1.9839.2.1.1.11 | humidification, flow-value-alarm, filter-alm, al_lp_ckt1, power, all_alta_temp, fan_off_ctrl, diginputpol1, all_id_1, err_sonda_b1, dout_2, dout_10, id2_remoto, z12, dis_keyb_h2, keyb_disabled, rich_parz12, err_sonda_s3, dig_input1 | 0 | 0 | Humidification |
| 1.3.6.1.4.1.9839.2.1.1.12 | emerg, al-q-comp1, humidifier-alm, al_lp_ckt2, mal-access, all_sonda_amb, sys_on, fan_defrost_ctrl, diginputpol2, all_alta_temp, compressor1, dout_3, dout_11, id3_remoto, val_par, vis_probe__4, loc_on_off_ena, rich_parz22, err_sonda_s4, dig_input2 | 0 | 0 | Main Power Loss |
| 1.3.6.1.4.1.9839.2.1.1.13 | firestat-alm, al-q-comp2, al_flow_sw, mal-ata, all_sonda_def, mask_term_klix1, keyb_disabled, alrdefrost, all_bassa_temp, compressor2, err_eeprom_s, dout_4, dout_12, stato_regolazione, syson2, buzz_pwup, lan_on_off_ena, comp3, err_sonda_s5 | 0 | 0 | Temperature of return air above firestat alarm set point |
| 1.3.6.1.4.1.9839.2.1.1.14 | shortcycle-alm, al-q-comp3, al_clogged_fl, mal-bta, all_imm_ai, mask_term_klix2, prop_prop_int, compressor3, dout_5, dout_13, sbrinamento_manuale, val_es_ok, di1, lan_din, rich_parz13, err_eeprom | 0 | 0 | One or more comps has short cycled |
| 1.3.6.1.4.1.9839.2.1.1.15 | humidity-fail, al-q-comp4, al_heaters_ol, mal-aua, all_rit_ad, mask_term_klix3, tipo_sonda, compressor4, dout_6, ventilatore_p, en_evap_flow_al, forzatura_on, umidifica, di2, defrost_tout_alarm_ena, rich_parz23, freq_rete | 0 | 0 | Sensor is out of range |
| 1.3.6.1.4.1.9839.2.1.1.16 | ret-air-fail, al-q-comp5, al_fan_ol, mal-bua, defrost_tout_alarm_ena, celsius_farhan, compressor5, all_termin_off, dout_7, cont_avv_a1, en_b1, parz1, minmax_store_enable, comp4, allarme_terminale_disconnesso | 0 | 0 | Sensor is out of range |
| 1.3.6.1.4.1.9839.2.1.1.17 | maint-alm, al-q-comp6, al_comp_ol, mal-eap, sbrinam_on, minmax_store_enable, modo_speciale, compressor6, sbrinamento_on, dout_8, cont_avv_a2, en_b2, parz2, night_reg_probe, rich_parz14, defrost_st_1 | 0 | 0 | Maintenance Schedule Due alarm |
| 1.3.6.1.4.1.9839.2.1.1.18 | c1-hp-alm, al-q-fan-1, al_freecool, mal-filter, night_reg_probe, tipo_out_grad4, compressor7, all_sbrinamento, dout_9, en_b3, valfre, al_probe1, di5, haccp_reset, rich_parz24 | 0 | 0 | High pressure alarm |
| 1.3.6.1.4.1.9839.2.1.1.19 | c1-lp-alm, al-q-fan-2, al_humidif, mal-flood, haccp_reset, tipo_out_grad3, compressor8, all_antigelo, dout_10, en_b4, valfre1, al_probe2, di6, comp5, defrost_st_2 | 0 | 0 | Low pressure alarm |
| 1.3.6.1.4.1.9839.2.1.1.20 | alarmAccess, al-q-fan11, c2-hp-alm, al_room_lt, mal-flux, tipo_out_grad2, compressor9, all_agelo_sonda, dout_11, resistenza1, en_b5, valca, al_ext_id, ag, rich_parz15, all_h_press_c1 | 0 | 0 | Tampering Alarm |
| 1.3.6.1.4.1.9839.2.1.1.21 | alarmRoomHT, al-q-fan12, c2-lp-alm, al_room_ht, mal-heater, tipo_out_grad1, compressor10, all_sovratens, dout_12, resistenza2, en_b6, valca1, al_low_temp, at1h, rich_parz25, all_l_press_c1, ko_b1 | 0 | 0 | Alarm: Room High Temperature |
| 1.3.6.1.4.1.9839.2.1.1.22 | alarmRoomLT, al-q-fan13, smoke-alm, al_room_lh, mal-hp1, compressor11, all_sottotens, dout_13, umidifica, en_b7, glb_al, al_hi_temp, at1l, comp6, all_term_compc1, ko_b2 | 0 | 0 | Alarm: Room Low Temperature |
| 1.3.6.1.4.1.9839.2.1.1.23 | alarmRoomHH, al-q-fan14, wtr-flow-alm, al_room_hh, mal-hp2, mask_dif_olio1, fan1, ventilatore1, en_b8, s_firmanook, al_ee, at2h, rich_parz16, all_term_fanc1, id_al_immdt_sel | 0 | 0 | Alarm: Room High Humidity |
| 1.3.6.1.4.1.9839.2.1.1.24 | alarmRoomLH, al-q-fan21, disch-air-fail, al_generic_ext, mal-lp1, mask_dif_olio2, fan2, ventilatore2, superv_onoff, s_error_io, at2l, rich_parz26, all_flusso, id_al_dlyd_sel | 0 | 0 | Alarm: Room Low Humidity |
| 1.3.6.1.4.1.9839.2.1.1.25 | alarmRoomEAP, al-q-fan22, ra-tmp-hi-alm, al_fan_maint, mal-lp2, mask_dif_olio3, fan3, stato_pompa, en_start_restr, s_bp1, at3h, din1, lowt | 0 | 0 | Room T+H Limits by External Sensors |
| 1.3.6.1.4.1.9839.2.1.1.26 | alarmFilter, al-q-fan-23, ra-tmp-lo-alm, al_filter_maint, mal-phase, c_f__5, fan4, stato_compress, glb_al, en_modulation, s_bp2, comp_status, at3l, din2, est_inv, hight | 0 | 0 | Alarm: Clogged Filter |
| 1.3.6.1.4.1.9839.2.1.1.27 | alarmFlood, al-q-fan24, hum-hi-alm, al_comp1_maint, mal-smoke, en_ed_alarm, fan5, stato_resists, mask_term1, sun_win_sel, s_fl1, fan_status, at4h, din3, all_h_press_c2, def_al | 0 | 0 | Alarm: Water Leakage Detected |
| 1.3.6.1.4.1.9839.2.1.1.28 | alarmAirFlow, al-idrofrigo-pump1, hum-lo-alm, al_comp2_maint, mal-lan, mask_pres_lpres, fan6, stato_valvola, master, mask_term2, s_trf, defrost_status, at4l, din4, all_l_press_c2 | 0 | 0 | Alarm: Loss of Air Flow |
| 1.3.6.1.4.1.9839.2.1.1.29 | alarmHeater, al-idrofrigo-pump2, fan-overload, al_low_c_ee, mal-hcurr, def_uni_up, mask_pres_hpres, fan7, slave, mask_press_h1, cooling_heating, s_trs1, aux_status, af1, dig_in_1, din5, all_term_compc2 | 0 | 0 | Alarm: Heater Overheating |
| 1.3.6.1.4.1.9839.2.1.1.30 | alarmHP1, al-phase-cont, stdby-pump-on, al_volt_lack, mal-nopower, def_pri, mask_liv_liq, fan8, stato_ventils, en_b1, mask_press_h2, inverter, s_trs2, af2, dig_in_2, din6, all_term_fanc2 | 0 | 0 | Alarm: Circuit 1 High Pressure |
| 1.3.6.1.4.1.9839.2.1.1.31 | alarmHP2, al-door-sw, cust-msg-sw1, al_smoke_fire, mal-nowater, time_base_dc, fan9, en_b2, mask_antigelo, s_fsa, din7 | 0 | 0 | Alarm: Circuit 1 High Pressure |
| 1.3.6.1.4.1.9839.2.1.1.32 | alarmLP1, compressor-FlowRate, cust-msg-sw2, mal-cw-dh, mask_term_vent1, fan10, en_b3, mask_q14, s_flt, din8, rich_manut_c2 | 0 | 0 | Alarm: Circuit 1 Low Pressure |
| 1.3.6.1.4.1.9839.2.1.1.33 | alarmLP2, setpoint-inv-pumps, cust-msg-sw3, unit_status, mal-tc-cw, stop_fan_f2, mask_term_vent2, fan11, en_b4, mask_q15, s_all_h_temp, af5, s_comp, din9, all_antigelo_c1 | 0 | 0 | Alarm: Circuit 2 Low Pressure |
| 1.3.6.1.4.1.9839.2.1.1.34 | alarmEXV1, enable-pumps-redundance, cust-msg-sw4, comp1_status, mal-wflow, stop_fan_f3, mask_term_vent3, en_b5, mask_q3, s_all_l_temp, af6, s_fan, din10, all_antigelo_c2 | 0 | 0 | Alarm: Circuit 1 Electronic Valve Failure |
| 1.3.6.1.4.1.9839.2.1.1.35 | alarmEXV2, enable-chiller-redundance, humsw-inhibit, comp2_status, mal-wht, s_comp, en_b6, mask_q4, s_all_h_umid, di_glb_status, as1, s_defrost, din11, all_defrost_c1 | 0 | 0 | Alarm: Circuit 2 Electronic Valve Failure |
| 1.3.6.1.4.1.9839.2.1.1.36 | alarmPSE, status-in-alarm, heat-inhibit, heater1_status, mal-sonda-ta, s_fan, en_b7, mask_q5, s_all_l_umid, instr_connect, as2, s_aux_2, din12, all_defrost_c2 | 0 | 0 | Alarm: Wrong Phase Sequence |
| 1.3.6.1.4.1.9839.2.1.1.37 | alarmSmokeFire, compressor-recovery, rht-hum-inhibit, heater2_status, mal-sonda-tac, mask_ore_comp1, s_defrost, en_b8, mask_q6, s_al_ore_comp1, al_low_voltage, as3, s_alarm, din13, tsonda_inev__1, lost1 | 0 | 0 | Alarm: SMOKE-FIRE DETECTED |
| 1.3.6.1.4.1.9839.2.1.1.38 | alarmLAN, enable-thermal-redundance, disch-tmp-lo-alm, fan_status, mal-sonda-tc, mask_ore_comp2, s_aux_2, bassa_press1, s_al_ore_comp2, i2c_int_fail, as4, din14, tsonda_outev__2, lost2 | 0 | 0 | Interrupted LAN Alarm |
| 1.3.6.1.4.1.9839.2.1.1.39 | alarmHUHC, enable-multi-pumps-function, override-alm, deshum_status, mal-sonda-te, m_def, mask_ore_comp3, bassa_press2, s_al_ore_umidif, ahw, s_light, din15, lost3 | 0 | 0 | Alarm: Humidifier High Current |
| 1.3.6.1.4.1.9839.2.1.1.40 | alarmHUPL, enable-pumps-offline, condensation-alm, mal-sonda-tm, unita_misura, main_pump, mask_interbl, s_al_ore_mac, td1, dr_supervisor, din16, out_per_fan_f1, lost4 | 0 | 0 | Alarm: Humidifier Power Loss |
| 1.3.6.1.4.1.9839.2.1.1.41 | alarmHUWL, enable-3way-valve, unit-in-standby, humid_on, mal-sonda-ua, out_per_fan_f1, cond_pump, mask_defrost1, s_al_ore_res1, td2, dr_svendreq, din17, defr_antig_d1, lost5 | 0 | 0 | Alarm: Humidifier Water Loss |
| 1.3.6.1.4.1.9839.2.1.1.42 | alarmCWDHT, enable-speed-up-FCM, cw-sns-fail, mal-ore-compr1, int_display, mask_alta_mand, all_alta_temp, mal_maint_dev1, esecuz_sbrin_d1, superv_onoff, mask_defrost2, s_al_ore_res2, din18, lostm | 0 | 0 | Alarm: CW Temperature too High for Dehumidification |
| 1.3.6.1.4.1.9839.2.1.1.44 | alarmCWFF, enable-freecooling, bms-cooling-inhibit, mal-ore-compr3, blocco_vis_sbrin, all_clean_management, mal_maint_dev3, res_gelo_sbr_db, sum_win_sup, mask_term_res, s_all_l_free, td5, a1_e1, all_pres_hpres, num_evap_h3 | 0 | 0 | Alarm: Loss of Water Flow |
| 1.3.6.1.4.1.9839.2.1.1.45 | alarmCWHT, enable-rot-FIFO-FC, bms-heat-inhibit, al_fan1_ol, mal-ore-compr4, all_def_tout, mal_maint_dev4, en_sonda_res_a6, en_pompacalore, s_sonda1_ko, td6, a1_e2, din101, compr_parz_h4, rem1 | 0 | 0 | Alarm: High Chilled Water Temperature |
| 1.3.6.1.4.1.9839.2.1.1.46 | alarmRTS, enable-HT-function, bms-humidifier-inhibit, al_fan2_ol, mal-ore-filtro, mask_ora, all_driver_lan, mal_maint_dev5, all_lp_sonda_p7, en_freecooling, en_orologio, mal_freeze, s_sonda2_ko, ct, a1_e3, din102, en_din_e_i_h6, rem2 | 0 | 0 | Alarm: Room Temp. Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.47 | alarmHWS, enable-PID-Fc-valve, bms-dehum-inhibit, mal-ore-risc1, all_driver_probe_1, dr_supervisor, mal_maint_dev6, en_id_on_off_h7, en_aa_unit, en_umidita, mal_comp, s_sonda4_ko, buzz, a1_ia, din103, en_din_a_s_h7, rem3 | 0 | 0 | Alarm: Hot Water Temp. Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.48 | alarmCWS, enable-Fc-Thermal-Exclusion, fan-inhibit-bms, mal-ore-risc2, mask_epromnook, all_driver_probe_2, dr_svendreq, mal_maint_dev7, all_lp_comp_pa, en_ww_unit, en_mandata, mal_evap_flow, s_sonda6_ko, rele1_stato, a1_da, din104, num_termin_h8, rem4 | 0 | 0 | Alarm: Chilled Water Temp. Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.49 | alarmOTS, manual-Reset-Ext-Drycooler-Alarm, hum-expect, on_off, mal-ore-umid, mask_bassa_asp, mal_maint_dev8, en_set2_hc, sum_win_sel, mal_cond_flow, s_sondau_ko, a1_ea, din105, num_compressori, rem5 | 0 | 0 | Alarm: Outdoor Temperature Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.50 | alarmDTS, enable-static-press-Alarm, usashr-f-c, measunit, mal-ore-unit, all_duty_set, mal_maint_dev9, inv_est_inv_hd, en_sum_win, en_supervisore, mal_high_press, a1_re, din106, comp_rot_r5 | 0 | 0 | Alarm: Delivery Air Temp. Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.51 | alarmRHS, manual-reset-static-press-Alarm, glb-al, glb_al, all_ext_del, a1_e1, mal_maint_dev10, sel_rele_all_hf, cooling_heating, en_stampante, mal_oil_level, s_epromnook, a1_id, din107, def_ext_da | 0 | 0 | Alarm: Room Humidity Sensor Failed/Disconnected |