OID reference
1.3.6.1.4.1.9839.2.1.1.35
Alarm: Circuit 2 Electronic Valve Failure
Identification
{1 3 6 1 4 1 9839 2 1 1 35}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.9839.2.1.1.35.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 14 distinct definitions; some records may not include a definition.
s_defrost OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Defrost status"
::= { digitalObjects 35 }mask_q4 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Inlet air low temperature alarm"
::= { digitalObjects 35 }as1 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Alarm probe 1 damaged"
::= { digitalObjects 35 }s_comp OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Compressor relay status"
::= { digitalObjects 35 }en_b6 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "flag"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable probe B6"
DEFVAL { 1 }
::= { digitalObjects 35 }din11 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of digital input 11"
::= { digitalObjects 35 }comp2_status OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Compressor 2"
::= { digitalObjects 35 }mal-wht OBJECT-TYPE
SYNTAX Integer32
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Alarm: High chilled water temp."
::= { digitalObjects 35 }s_all_h_umid OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "High humidity alarm"
::= { digitalObjects 35 }di_glb_status OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Digital input"
::= { digitalObjects 35 }humsw-inhibit OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Humidifier stopped due to custom alarm switch"
DEFVAL { 0 }
::= { digitalObjects 35 }alarmEXV2 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Alarm: Circuit 2 Electronic Valve Failure"
::= { digitalObjects 35 }all_defrost_c1 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Circuit 1 defrost termination alarm"
::= { digitalObjects 35 }enable-chiller-redundance OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable Chiller redundance"
::= { digitalObjects 35 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
Defrost status
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 3
Inlet air low temperature alarm
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 4
Alarm probe 1 damaged
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 5
Compressor relay status
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 6
Enable probe B6
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 7
Status of digital input 11
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 8
Compressor 2
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 9
Alarm: High chilled water temp.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 10
High humidity alarm
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 11
Digital input
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 12
Humidifier stopped due to custom alarm switch
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 13
Circuit 1 defrost termination alarm
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 14
Enable Chiller redundance
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: s_defrost
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"s_defrost",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Defrost status\"",
"::=",
"{",
"digitalObjects",
"35",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Defrost status"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-powersplit-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Status in source: current.
Names: mask_q4
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mask_q4",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Inlet air low temperature alarm\"",
"::=",
"{",
"digitalObjects",
"35",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Inlet air low temperature alarm"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-rtop_pco-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: as1
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"as1",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Alarm probe 1 damaged\"",
"::=",
"{",
"digitalObjects",
"35",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Alarm probe 1 damaged"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mio-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: s_comp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"s_comp",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Compressor relay status\"",
"::=",
"{",
"digitalObjects",
"35",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Compressor relay status"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mastercellasplit-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: en_b6
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"en_b6",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"22666c616722"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Enable probe B6\"",
"DEFVAL",
"{",
"1",
"}",
"::=",
"{",
"digitalObjects",
"35",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"flag"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Enable probe B6"
],
null,
null,
null,
[
"DEFVAL",
1
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mod_ch-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: din11
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"din11",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Status of digital input 11\"",
"::=",
"{",
"digitalObjects",
"35",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Status of digital input 11"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-fcp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: comp2_status
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"comp2_status",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Compressor 2\"",
"::=",
"{",
"digitalObjects",
"35",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Compressor 2"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uac-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: mal-wht
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mal-wht",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Alarm: High chilled water temp.\"",
"::=",
"{",
"digitalObjects",
"35",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Alarm: High chilled water temp."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: UNCDZ-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: s_all_h_umid
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"s_all_h_umid",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"High humidity alarm\"",
"::=",
"{",
"digitalObjects",
"35",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"High humidity alarm"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-cdz_pco-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: di_glb_status
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"di_glb_status",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Digital input\"",
"::=",
"{",
"digitalObjects",
"35",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Digital input"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-plugin-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: humsw-inhibit
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"humsw-inhibit",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Humidifier stopped due to custom alarm switch\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"digitalObjects",
"35",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Humidifier stopped due to custom alarm switch"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the LibreNMS archive.
Module: DataAire-dap4-al-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: DataAire-dap4-al-MIB
Same published definition (formatting differs; exact original is in the source file)
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: alarmEXV2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"alarmEXV2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Alarm: Circuit 2 Electronic Valve Failure\"",
"::=",
"{",
"digitalObjects",
"35",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Alarm: Circuit 2 Electronic Valve Failure"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: CAREL-ug40cdz-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'RFC1213-MIB': ['DisplayString'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Same file in Observium Community.
Status in source: current.
Names: all_defrost_c1
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"all_defrost_c1",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Circuit 1 defrost termination alarm\"",
"::=",
"{",
"digitalObjects",
"35",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Circuit 1 defrost termination alarm"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uchiller-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: enable-chiller-redundance
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"enable-chiller-redundance",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Enable Chiller redundance\"",
"::=",
"{",
"digitalObjects",
"35",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Enable Chiller redundance"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: KELVIN-pCOWeb-Chiller-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Same file in Observium Community.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9839.2.1.1.1 | systemOn, al-pa1, dehum-on, vent-on, ciclo_continuo, on_off_status, cent_fhren_flag, diginput1, stato_id_1, device1, est_inv, syson_s, id1, z1, unit_meas__5, buz, scheda_modem, res_antig_c1, dig_output1 | 0 | 0 | System On (Fan) |
| 1.3.6.1.4.1.9839.2.1.1.2 | compressore1, al-pa2, hum-on, ventilatori, comp1, en_dec_point, autoscale, diginput2, stato_id_2, device2, on_off_unita, dout_1, id2, en_alm_ed_r3, cf, present_expansion, dig_output2 | 0 | 0 | Compressor 1 |
| 1.3.6.1.4.1.9839.2.1.1.3 | compressore2, al-pb1, engy-on, al_eeprom, comp2, defrost_con_sonda_3, defrostprobeselect, alrlowbatt, stato_ud_1, device3, dout_2, id3, z3, fan_mode_f0, mtd1, fan1, valv_inv_c1, dig_output3 | 0 | 0 | Compressor 2 |
| 1.3.6.1.4.1.9839.2.1.1.4 | compressore3, al-pb2, cool-inhibit, al_b1_ko, compressor, comp3, enable_ed_alarm, sel_probe_term, alrprobefault, stato_ud_2, device4, dout_3, reset_allarmi, z4, start_def_on_d4, mtd2, defrost_cmd, fan2, dig_output4 | 0 | 0 | Compressor 3 |
| 1.3.6.1.4.1.9839.2.1.1.5 | compressore4, heat-held, al_b2_ko, aux_out, enable_monitor_temp_maxmin, pd_autostart_enable, stato_ud_3, device5, allarme_hp, dout_4, reset_hardware, z5, stop_vis_def_d6, defrost_at_startup, fan3, allarme | 0 | 0 | Compressor 4 |
| 1.3.6.1.4.1.9839.2.1.1.6 | heating1, al-le, humidifier-inhibit, al_b3_ko, out-h1, valv_inv_ciclo, regol_notturna_sonda_3, defrost_cmd, alrhightempprobe1, stato_ud_4, device6, allarme_lp, dout_5, forza_invio_parametri, z6, def_priority_d9, defrost_show, fan4, antifreeze_resist_c2 | 0 | 0 | Heating 1 |
| 1.3.6.1.4.1.9839.2.1.1.7 | heating2, dehum-inhibit, al_b4_ko, out-h2, vent1, disable_pid, defrost_at_startup, alrhightempprobe2, device7, dout_6, stato_uscite_remoto, z7, time_base_dc, mtd5, defrost_priority, comp1, compressore_c2 | 0 | 0 | Heating 2 |
| 1.3.6.1.4.1.9839.2.1.1.8 | rht-during-dehum, al-idrofrigo-fl1, al_clock, out-h3, all_eeprom, vent2, en_exenq_5, defrost_show, alrlowtempprobe1, all_sonda_0, device8, all_flusso, start_stop, dout_7, buzzer, onr, fan_cmp_off_f2, mtd6, fan_cfg, rich_parz11, valv_inv_c2 | 0 | 0 | reheat during dehum |
| 1.3.6.1.4.1.9839.2.1.1.9 | hotGasCoil, static-press-alarm, floor-wtr-alm, al_hp_ckt1, gas-caldo-on, all_timeout_def, vent3, pressure_probe_from_master, defrost_priority, alrlowtempprobe2, all_sonda_1, device9, err_sonda_b3, dout_8, allarme_remoto, z9, fan_off_def_f3, rele1_pwup, fan_off_ctrl, rich_parz21, err_sonda_s1 | 0 | 0 | Hot Gas Coil |
| 1.3.6.1.4.1.9839.2.1.1.10 | dehumidification, w-static-press-alarm, air-flow-alm, al_hp_ckt2, on-deum, all_bassa_temp, fan_cfg, hightempalrenabled, all_eeprom, device10, err_sonda_b2, dout_1, dout_9, id1_remoto, z10, dis_buzzer_h4, fan_defrost_ctrl, comp2, err_sonda_s2 | 0 | 0 | Dehumidification |
| 1.3.6.1.4.1.9839.2.1.1.11 | humidification, flow-value-alarm, filter-alm, al_lp_ckt1, power, all_alta_temp, fan_off_ctrl, diginputpol1, all_id_1, err_sonda_b1, dout_2, dout_10, id2_remoto, z12, dis_keyb_h2, keyb_disabled, rich_parz12, err_sonda_s3, dig_input1 | 0 | 0 | Humidification |
| 1.3.6.1.4.1.9839.2.1.1.12 | emerg, al-q-comp1, humidifier-alm, al_lp_ckt2, mal-access, all_sonda_amb, sys_on, fan_defrost_ctrl, diginputpol2, all_alta_temp, compressor1, dout_3, dout_11, id3_remoto, val_par, vis_probe__4, loc_on_off_ena, rich_parz22, err_sonda_s4, dig_input2 | 0 | 0 | Main Power Loss |
| 1.3.6.1.4.1.9839.2.1.1.13 | firestat-alm, al-q-comp2, al_flow_sw, mal-ata, all_sonda_def, mask_term_klix1, keyb_disabled, alrdefrost, all_bassa_temp, compressor2, err_eeprom_s, dout_4, dout_12, stato_regolazione, syson2, buzz_pwup, lan_on_off_ena, comp3, err_sonda_s5 | 0 | 0 | Temperature of return air above firestat alarm set point |
| 1.3.6.1.4.1.9839.2.1.1.14 | shortcycle-alm, al-q-comp3, al_clogged_fl, mal-bta, all_imm_ai, mask_term_klix2, prop_prop_int, compressor3, dout_5, dout_13, sbrinamento_manuale, val_es_ok, di1, lan_din, rich_parz13, err_eeprom | 0 | 0 | One or more comps has short cycled |
| 1.3.6.1.4.1.9839.2.1.1.15 | humidity-fail, al-q-comp4, al_heaters_ol, mal-aua, all_rit_ad, mask_term_klix3, tipo_sonda, compressor4, dout_6, ventilatore_p, en_evap_flow_al, forzatura_on, umidifica, di2, defrost_tout_alarm_ena, rich_parz23, freq_rete | 0 | 0 | Sensor is out of range |
| 1.3.6.1.4.1.9839.2.1.1.16 | ret-air-fail, al-q-comp5, al_fan_ol, mal-bua, defrost_tout_alarm_ena, celsius_farhan, compressor5, all_termin_off, dout_7, cont_avv_a1, en_b1, parz1, minmax_store_enable, comp4, allarme_terminale_disconnesso | 0 | 0 | Sensor is out of range |
| 1.3.6.1.4.1.9839.2.1.1.17 | maint-alm, al-q-comp6, al_comp_ol, mal-eap, sbrinam_on, minmax_store_enable, modo_speciale, compressor6, sbrinamento_on, dout_8, cont_avv_a2, en_b2, parz2, night_reg_probe, rich_parz14, defrost_st_1 | 0 | 0 | Maintenance Schedule Due alarm |
| 1.3.6.1.4.1.9839.2.1.1.18 | c1-hp-alm, al-q-fan-1, al_freecool, mal-filter, night_reg_probe, tipo_out_grad4, compressor7, all_sbrinamento, dout_9, en_b3, valfre, al_probe1, di5, haccp_reset, rich_parz24 | 0 | 0 | High pressure alarm |
| 1.3.6.1.4.1.9839.2.1.1.19 | c1-lp-alm, al-q-fan-2, al_humidif, mal-flood, haccp_reset, tipo_out_grad3, compressor8, all_antigelo, dout_10, en_b4, valfre1, al_probe2, di6, comp5, defrost_st_2 | 0 | 0 | Low pressure alarm |
| 1.3.6.1.4.1.9839.2.1.1.20 | alarmAccess, al-q-fan11, c2-hp-alm, al_room_lt, mal-flux, tipo_out_grad2, compressor9, all_agelo_sonda, dout_11, resistenza1, en_b5, valca, al_ext_id, ag, rich_parz15, all_h_press_c1 | 0 | 0 | Tampering Alarm |
| 1.3.6.1.4.1.9839.2.1.1.21 | alarmRoomHT, al-q-fan12, c2-lp-alm, al_room_ht, mal-heater, tipo_out_grad1, compressor10, all_sovratens, dout_12, resistenza2, en_b6, valca1, al_low_temp, at1h, rich_parz25, all_l_press_c1, ko_b1 | 0 | 0 | Alarm: Room High Temperature |
| 1.3.6.1.4.1.9839.2.1.1.22 | alarmRoomLT, al-q-fan13, smoke-alm, al_room_lh, mal-hp1, compressor11, all_sottotens, dout_13, umidifica, en_b7, glb_al, al_hi_temp, at1l, comp6, all_term_compc1, ko_b2 | 0 | 0 | Alarm: Room Low Temperature |
| 1.3.6.1.4.1.9839.2.1.1.23 | alarmRoomHH, al-q-fan14, wtr-flow-alm, al_room_hh, mal-hp2, mask_dif_olio1, fan1, ventilatore1, en_b8, s_firmanook, al_ee, at2h, rich_parz16, all_term_fanc1, id_al_immdt_sel | 0 | 0 | Alarm: Room High Humidity |
| 1.3.6.1.4.1.9839.2.1.1.24 | alarmRoomLH, al-q-fan21, disch-air-fail, al_generic_ext, mal-lp1, mask_dif_olio2, fan2, ventilatore2, superv_onoff, s_error_io, at2l, rich_parz26, all_flusso, id_al_dlyd_sel | 0 | 0 | Alarm: Room Low Humidity |
| 1.3.6.1.4.1.9839.2.1.1.25 | alarmRoomEAP, al-q-fan22, ra-tmp-hi-alm, al_fan_maint, mal-lp2, mask_dif_olio3, fan3, stato_pompa, en_start_restr, s_bp1, at3h, din1, lowt | 0 | 0 | Room T+H Limits by External Sensors |
| 1.3.6.1.4.1.9839.2.1.1.26 | alarmFilter, al-q-fan-23, ra-tmp-lo-alm, al_filter_maint, mal-phase, c_f__5, fan4, stato_compress, glb_al, en_modulation, s_bp2, comp_status, at3l, din2, est_inv, hight | 0 | 0 | Alarm: Clogged Filter |
| 1.3.6.1.4.1.9839.2.1.1.27 | alarmFlood, al-q-fan24, hum-hi-alm, al_comp1_maint, mal-smoke, en_ed_alarm, fan5, stato_resists, mask_term1, sun_win_sel, s_fl1, fan_status, at4h, din3, all_h_press_c2, def_al | 0 | 0 | Alarm: Water Leakage Detected |
| 1.3.6.1.4.1.9839.2.1.1.28 | alarmAirFlow, al-idrofrigo-pump1, hum-lo-alm, al_comp2_maint, mal-lan, mask_pres_lpres, fan6, stato_valvola, master, mask_term2, s_trf, defrost_status, at4l, din4, all_l_press_c2 | 0 | 0 | Alarm: Loss of Air Flow |
| 1.3.6.1.4.1.9839.2.1.1.29 | alarmHeater, al-idrofrigo-pump2, fan-overload, al_low_c_ee, mal-hcurr, def_uni_up, mask_pres_hpres, fan7, slave, mask_press_h1, cooling_heating, s_trs1, aux_status, af1, dig_in_1, din5, all_term_compc2 | 0 | 0 | Alarm: Heater Overheating |
| 1.3.6.1.4.1.9839.2.1.1.30 | alarmHP1, al-phase-cont, stdby-pump-on, al_volt_lack, mal-nopower, def_pri, mask_liv_liq, fan8, stato_ventils, en_b1, mask_press_h2, inverter, s_trs2, af2, dig_in_2, din6, all_term_fanc2 | 0 | 0 | Alarm: Circuit 1 High Pressure |
| 1.3.6.1.4.1.9839.2.1.1.31 | alarmHP2, al-door-sw, cust-msg-sw1, al_smoke_fire, mal-nowater, time_base_dc, fan9, en_b2, mask_antigelo, s_fsa, din7 | 0 | 0 | Alarm: Circuit 1 High Pressure |
| 1.3.6.1.4.1.9839.2.1.1.32 | alarmLP1, compressor-FlowRate, cust-msg-sw2, mal-cw-dh, mask_term_vent1, fan10, en_b3, mask_q14, s_flt, din8, rich_manut_c2 | 0 | 0 | Alarm: Circuit 1 Low Pressure |
| 1.3.6.1.4.1.9839.2.1.1.33 | alarmLP2, setpoint-inv-pumps, cust-msg-sw3, unit_status, mal-tc-cw, stop_fan_f2, mask_term_vent2, fan11, en_b4, mask_q15, s_all_h_temp, af5, s_comp, din9, all_antigelo_c1 | 0 | 0 | Alarm: Circuit 2 Low Pressure |
| 1.3.6.1.4.1.9839.2.1.1.34 | alarmEXV1, enable-pumps-redundance, cust-msg-sw4, comp1_status, mal-wflow, stop_fan_f3, mask_term_vent3, en_b5, mask_q3, s_all_l_temp, af6, s_fan, din10, all_antigelo_c2 | 0 | 0 | Alarm: Circuit 1 Electronic Valve Failure |
| 1.3.6.1.4.1.9839.2.1.1.36 | alarmPSE, status-in-alarm, heat-inhibit, heater1_status, mal-sonda-ta, s_fan, en_b7, mask_q5, s_all_l_umid, instr_connect, as2, s_aux_2, din12, all_defrost_c2 | 0 | 0 | Alarm: Wrong Phase Sequence |
| 1.3.6.1.4.1.9839.2.1.1.37 | alarmSmokeFire, compressor-recovery, rht-hum-inhibit, heater2_status, mal-sonda-tac, mask_ore_comp1, s_defrost, en_b8, mask_q6, s_al_ore_comp1, al_low_voltage, as3, s_alarm, din13, tsonda_inev__1, lost1 | 0 | 0 | Alarm: SMOKE-FIRE DETECTED |
| 1.3.6.1.4.1.9839.2.1.1.38 | alarmLAN, enable-thermal-redundance, disch-tmp-lo-alm, fan_status, mal-sonda-tc, mask_ore_comp2, s_aux_2, bassa_press1, s_al_ore_comp2, i2c_int_fail, as4, din14, tsonda_outev__2, lost2 | 0 | 0 | Interrupted LAN Alarm |
| 1.3.6.1.4.1.9839.2.1.1.39 | alarmHUHC, enable-multi-pumps-function, override-alm, deshum_status, mal-sonda-te, m_def, mask_ore_comp3, bassa_press2, s_al_ore_umidif, ahw, s_light, din15, lost3 | 0 | 0 | Alarm: Humidifier High Current |
| 1.3.6.1.4.1.9839.2.1.1.40 | alarmHUPL, enable-pumps-offline, condensation-alm, mal-sonda-tm, unita_misura, main_pump, mask_interbl, s_al_ore_mac, td1, dr_supervisor, din16, out_per_fan_f1, lost4 | 0 | 0 | Alarm: Humidifier Power Loss |
| 1.3.6.1.4.1.9839.2.1.1.41 | alarmHUWL, enable-3way-valve, unit-in-standby, humid_on, mal-sonda-ua, out_per_fan_f1, cond_pump, mask_defrost1, s_al_ore_res1, td2, dr_svendreq, din17, defr_antig_d1, lost5 | 0 | 0 | Alarm: Humidifier Water Loss |
| 1.3.6.1.4.1.9839.2.1.1.42 | alarmCWDHT, enable-speed-up-FCM, cw-sns-fail, mal-ore-compr1, int_display, mask_alta_mand, all_alta_temp, mal_maint_dev1, esecuz_sbrin_d1, superv_onoff, mask_defrost2, s_al_ore_res2, din18, lostm | 0 | 0 | Alarm: CW Temperature too High for Dehumidification |
| 1.3.6.1.4.1.9839.2.1.1.43 | alarmCWF, enable-soft-start-FCM, humsw-chk-cyl, mal-ore-compr2, en_max_min, mask_alta_asp, all_bassa_temp, mal_maint_dev2, def_time_tmp_d2, mask_filtro, s_all_h_free, all_pres_lpres, num_fan_h2, rtc_al | 0 | 0 | Alarm: CW Valve Failure or Water Flow too Low |
| 1.3.6.1.4.1.9839.2.1.1.44 | alarmCWFF, enable-freecooling, bms-cooling-inhibit, mal-ore-compr3, blocco_vis_sbrin, all_clean_management, mal_maint_dev3, res_gelo_sbr_db, sum_win_sup, mask_term_res, s_all_l_free, td5, a1_e1, all_pres_hpres, num_evap_h3 | 0 | 0 | Alarm: Loss of Water Flow |
| 1.3.6.1.4.1.9839.2.1.1.45 | alarmCWHT, enable-rot-FIFO-FC, bms-heat-inhibit, al_fan1_ol, mal-ore-compr4, all_def_tout, mal_maint_dev4, en_sonda_res_a6, en_pompacalore, s_sonda1_ko, td6, a1_e2, din101, compr_parz_h4, rem1 | 0 | 0 | Alarm: High Chilled Water Temperature |
| 1.3.6.1.4.1.9839.2.1.1.46 | alarmRTS, enable-HT-function, bms-humidifier-inhibit, al_fan2_ol, mal-ore-filtro, mask_ora, all_driver_lan, mal_maint_dev5, all_lp_sonda_p7, en_freecooling, en_orologio, mal_freeze, s_sonda2_ko, ct, a1_e3, din102, en_din_e_i_h6, rem2 | 0 | 0 | Alarm: Room Temp. Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.47 | alarmHWS, enable-PID-Fc-valve, bms-dehum-inhibit, mal-ore-risc1, all_driver_probe_1, dr_supervisor, mal_maint_dev6, en_id_on_off_h7, en_aa_unit, en_umidita, mal_comp, s_sonda4_ko, buzz, a1_ia, din103, en_din_a_s_h7, rem3 | 0 | 0 | Alarm: Hot Water Temp. Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.48 | alarmCWS, enable-Fc-Thermal-Exclusion, fan-inhibit-bms, mal-ore-risc2, mask_epromnook, all_driver_probe_2, dr_svendreq, mal_maint_dev7, all_lp_comp_pa, en_ww_unit, en_mandata, mal_evap_flow, s_sonda6_ko, rele1_stato, a1_da, din104, num_termin_h8, rem4 | 0 | 0 | Alarm: Chilled Water Temp. Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.49 | alarmOTS, manual-Reset-Ext-Drycooler-Alarm, hum-expect, on_off, mal-ore-umid, mask_bassa_asp, mal_maint_dev8, en_set2_hc, sum_win_sel, mal_cond_flow, s_sondau_ko, a1_ea, din105, num_compressori, rem5 | 0 | 0 | Alarm: Outdoor Temperature Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.50 | alarmDTS, enable-static-press-Alarm, usashr-f-c, measunit, mal-ore-unit, all_duty_set, mal_maint_dev9, inv_est_inv_hd, en_sum_win, en_supervisore, mal_high_press, a1_re, din106, comp_rot_r5 | 0 | 0 | Alarm: Delivery Air Temp. Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.51 | alarmRHS, manual-reset-static-press-Alarm, glb-al, glb_al, all_ext_del, a1_e1, mal_maint_dev10, sel_rele_all_hf, cooling_heating, en_stampante, mal_oil_level, s_epromnook, a1_id, din107, def_ext_da | 0 | 0 | Alarm: Room Humidity Sensor Failed/Disconnected |