OID reference
1.3.6.1.4.1.9839.2.1.1.37
Alarm: SMOKE-FIRE DETECTED
Identification
{1 3 6 1 4 1 9839 2 1 1 37}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.9839.2.1.1.37.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 16 distinct definitions; some records may not include a definition.
mask_q6 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maintenance compressor n°2"
::= { digitalObjects 37 }mask_ore_comp1 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maintenance compressor 1"
::= { digitalObjects 37 }lost1 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Slave 1 offline"
::= { digitalObjects 37 }s_alarm OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Alarm status"
::= { digitalObjects 37 }alarmSmokeFire OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Alarm: SMOKE-FIRE DETECTED"
::= { digitalObjects 37 }s_defrost OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Defrost relay status"
::= { digitalObjects 37 }s_al_ore_comp1 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maintenance compressor n°1"
::= { digitalObjects 37 }compressor-recovery OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Compressor Recovery"
::= { digitalObjects 37 }mal-sonda-tac OBJECT-TYPE
SYNTAX Integer32
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Alarm: Hot water Sensor Failure/Disconnected"
::= { digitalObjects 37 }din13 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of digital input 13"
::= { digitalObjects 37 }al_low_voltage OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Undervoltage alarm"
::= { digitalObjects 37 }as3 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Alarm probe 3 damaged"
::= { digitalObjects 37 }en_b8 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "flag"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable probe B8"
DEFVAL { 1 }
::= { digitalObjects 37 }tsonda_inev__1 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "flag"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Type of probe at evaporator inlet, B1"
DEFVAL { 1 }
::= { digitalObjects 37 }heater2_status OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Heater 2"
::= { digitalObjects 37 }rht-hum-inhibit OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reheat and humidification inhibited from operation"
DEFVAL { 0 }
::= { digitalObjects 37 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
Maintenance compressor n°2
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 3
Maintenance compressor 1
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 4
Slave 1 offline
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 5
Alarm status
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 6
Defrost relay status
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 7
Maintenance compressor n°1
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 8
Compressor Recovery
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 9
Alarm: Hot water Sensor Failure/Disconnected
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 10
Status of digital input 13
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 11
Undervoltage alarm
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 12
Alarm probe 3 damaged
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 13
Enable probe B8
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 14
Type of probe at evaporator inlet, B1
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 15
Heater 2
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 16
Reheat and humidification inhibited from operation
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: mask_q6
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mask_q6",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Maintenance compressor n°2\"",
"::=",
"{",
"digitalObjects",
"37",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Maintenance compressor n°2"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-rtop_pco-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Status in source: current.
Names: mask_ore_comp1
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mask_ore_comp1",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Maintenance compressor 1\"",
"::=",
"{",
"digitalObjects",
"37",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Maintenance compressor 1"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-cfp_ncp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: lost1
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"lost1",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Slave 1 offline\"",
"::=",
"{",
"digitalObjects",
"37",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Slave 1 offline"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-irmpx-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
· Download CAREL-irmpx-MIBStatus in source: current.
Names: s_alarm
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"s_alarm",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Alarm status\"",
"::=",
"{",
"digitalObjects",
"37",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Alarm status"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-powersplit-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: alarmSmokeFire
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"alarmSmokeFire",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Alarm: SMOKE-FIRE DETECTED\"",
"::=",
"{",
"digitalObjects",
"37",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Alarm: SMOKE-FIRE DETECTED"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: CAREL-ug40cdz-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'RFC1213-MIB': ['DisplayString'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Same file in Observium Community.
Status in source: current.
Names: s_defrost
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"s_defrost",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Defrost relay status\"",
"::=",
"{",
"digitalObjects",
"37",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Defrost relay status"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mastercellasplit-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: s_al_ore_comp1
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"s_al_ore_comp1",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Maintenance compressor n°1\"",
"::=",
"{",
"digitalObjects",
"37",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Maintenance compressor n°1"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-cdz_pco-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: compressor-recovery
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"compressor-recovery",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Compressor Recovery\"",
"::=",
"{",
"digitalObjects",
"37",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Compressor Recovery"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: KELVIN-pCOWeb-Chiller-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Same file in Observium Community.
Status in source: current.
Names: mal-sonda-tac
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mal-sonda-tac",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Alarm: Hot water Sensor Failure/Disconnected\"",
"::=",
"{",
"digitalObjects",
"37",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Alarm: Hot water Sensor Failure/Disconnected"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: UNCDZ-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: din13
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"din13",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Status of digital input 13\"",
"::=",
"{",
"digitalObjects",
"37",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Status of digital input 13"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-fcp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: al_low_voltage
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"al_low_voltage",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Undervoltage alarm\"",
"::=",
"{",
"digitalObjects",
"37",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Undervoltage alarm"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-plugin-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: as3
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"as3",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Alarm probe 3 damaged\"",
"::=",
"{",
"digitalObjects",
"37",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Alarm probe 3 damaged"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mio-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: en_b8
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"en_b8",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"22666c616722"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Enable probe B8\"",
"DEFVAL",
"{",
"1",
"}",
"::=",
"{",
"digitalObjects",
"37",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"flag"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Enable probe B8"
],
null,
null,
null,
[
"DEFVAL",
1
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mod_ch-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: tsonda_inev__1
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tsonda_inev__1",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"22666c616722"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Type of probe at evaporator inlet, B1\"",
"DEFVAL",
"{",
"1",
"}",
"::=",
"{",
"digitalObjects",
"37",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"flag"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Type of probe at evaporator inlet, B1"
],
null,
null,
null,
[
"DEFVAL",
1
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uchiller-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: heater2_status
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"heater2_status",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Heater 2\"",
"::=",
"{",
"digitalObjects",
"37",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Heater 2"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uac-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: rht-hum-inhibit
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rht-hum-inhibit",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Reheat and humidification inhibited from operation\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"digitalObjects",
"37",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Reheat and humidification inhibited from operation"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the LibreNMS archive.
Module: DataAire-dap4-al-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Vendor MIB copy from the Observium Community archive.
Module: DataAire-dap4-al-MIB
Same published definition (formatting differs; exact original is in the source file)
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9839.2.1.1.1 | systemOn, al-pa1, dehum-on, vent-on, ciclo_continuo, on_off_status, cent_fhren_flag, diginput1, stato_id_1, device1, est_inv, syson_s, id1, z1, unit_meas__5, buz, scheda_modem, res_antig_c1, dig_output1 | 0 | 0 | System On (Fan) |
| 1.3.6.1.4.1.9839.2.1.1.2 | compressore1, al-pa2, hum-on, ventilatori, comp1, en_dec_point, autoscale, diginput2, stato_id_2, device2, on_off_unita, dout_1, id2, en_alm_ed_r3, cf, present_expansion, dig_output2 | 0 | 0 | Compressor 1 |
| 1.3.6.1.4.1.9839.2.1.1.3 | compressore2, al-pb1, engy-on, al_eeprom, comp2, defrost_con_sonda_3, defrostprobeselect, alrlowbatt, stato_ud_1, device3, dout_2, id3, z3, fan_mode_f0, mtd1, fan1, valv_inv_c1, dig_output3 | 0 | 0 | Compressor 2 |
| 1.3.6.1.4.1.9839.2.1.1.4 | compressore3, al-pb2, cool-inhibit, al_b1_ko, compressor, comp3, enable_ed_alarm, sel_probe_term, alrprobefault, stato_ud_2, device4, dout_3, reset_allarmi, z4, start_def_on_d4, mtd2, defrost_cmd, fan2, dig_output4 | 0 | 0 | Compressor 3 |
| 1.3.6.1.4.1.9839.2.1.1.5 | compressore4, heat-held, al_b2_ko, aux_out, enable_monitor_temp_maxmin, pd_autostart_enable, stato_ud_3, device5, allarme_hp, dout_4, reset_hardware, z5, stop_vis_def_d6, defrost_at_startup, fan3, allarme | 0 | 0 | Compressor 4 |
| 1.3.6.1.4.1.9839.2.1.1.6 | heating1, al-le, humidifier-inhibit, al_b3_ko, out-h1, valv_inv_ciclo, regol_notturna_sonda_3, defrost_cmd, alrhightempprobe1, stato_ud_4, device6, allarme_lp, dout_5, forza_invio_parametri, z6, def_priority_d9, defrost_show, fan4, antifreeze_resist_c2 | 0 | 0 | Heating 1 |
| 1.3.6.1.4.1.9839.2.1.1.7 | heating2, dehum-inhibit, al_b4_ko, out-h2, vent1, disable_pid, defrost_at_startup, alrhightempprobe2, device7, dout_6, stato_uscite_remoto, z7, time_base_dc, mtd5, defrost_priority, comp1, compressore_c2 | 0 | 0 | Heating 2 |
| 1.3.6.1.4.1.9839.2.1.1.8 | rht-during-dehum, al-idrofrigo-fl1, al_clock, out-h3, all_eeprom, vent2, en_exenq_5, defrost_show, alrlowtempprobe1, all_sonda_0, device8, all_flusso, start_stop, dout_7, buzzer, onr, fan_cmp_off_f2, mtd6, fan_cfg, rich_parz11, valv_inv_c2 | 0 | 0 | reheat during dehum |
| 1.3.6.1.4.1.9839.2.1.1.9 | hotGasCoil, static-press-alarm, floor-wtr-alm, al_hp_ckt1, gas-caldo-on, all_timeout_def, vent3, pressure_probe_from_master, defrost_priority, alrlowtempprobe2, all_sonda_1, device9, err_sonda_b3, dout_8, allarme_remoto, z9, fan_off_def_f3, rele1_pwup, fan_off_ctrl, rich_parz21, err_sonda_s1 | 0 | 0 | Hot Gas Coil |
| 1.3.6.1.4.1.9839.2.1.1.10 | dehumidification, w-static-press-alarm, air-flow-alm, al_hp_ckt2, on-deum, all_bassa_temp, fan_cfg, hightempalrenabled, all_eeprom, device10, err_sonda_b2, dout_1, dout_9, id1_remoto, z10, dis_buzzer_h4, fan_defrost_ctrl, comp2, err_sonda_s2 | 0 | 0 | Dehumidification |
| 1.3.6.1.4.1.9839.2.1.1.11 | humidification, flow-value-alarm, filter-alm, al_lp_ckt1, power, all_alta_temp, fan_off_ctrl, diginputpol1, all_id_1, err_sonda_b1, dout_2, dout_10, id2_remoto, z12, dis_keyb_h2, keyb_disabled, rich_parz12, err_sonda_s3, dig_input1 | 0 | 0 | Humidification |
| 1.3.6.1.4.1.9839.2.1.1.12 | emerg, al-q-comp1, humidifier-alm, al_lp_ckt2, mal-access, all_sonda_amb, sys_on, fan_defrost_ctrl, diginputpol2, all_alta_temp, compressor1, dout_3, dout_11, id3_remoto, val_par, vis_probe__4, loc_on_off_ena, rich_parz22, err_sonda_s4, dig_input2 | 0 | 0 | Main Power Loss |
| 1.3.6.1.4.1.9839.2.1.1.13 | firestat-alm, al-q-comp2, al_flow_sw, mal-ata, all_sonda_def, mask_term_klix1, keyb_disabled, alrdefrost, all_bassa_temp, compressor2, err_eeprom_s, dout_4, dout_12, stato_regolazione, syson2, buzz_pwup, lan_on_off_ena, comp3, err_sonda_s5 | 0 | 0 | Temperature of return air above firestat alarm set point |
| 1.3.6.1.4.1.9839.2.1.1.14 | shortcycle-alm, al-q-comp3, al_clogged_fl, mal-bta, all_imm_ai, mask_term_klix2, prop_prop_int, compressor3, dout_5, dout_13, sbrinamento_manuale, val_es_ok, di1, lan_din, rich_parz13, err_eeprom | 0 | 0 | One or more comps has short cycled |
| 1.3.6.1.4.1.9839.2.1.1.15 | humidity-fail, al-q-comp4, al_heaters_ol, mal-aua, all_rit_ad, mask_term_klix3, tipo_sonda, compressor4, dout_6, ventilatore_p, en_evap_flow_al, forzatura_on, umidifica, di2, defrost_tout_alarm_ena, rich_parz23, freq_rete | 0 | 0 | Sensor is out of range |
| 1.3.6.1.4.1.9839.2.1.1.16 | ret-air-fail, al-q-comp5, al_fan_ol, mal-bua, defrost_tout_alarm_ena, celsius_farhan, compressor5, all_termin_off, dout_7, cont_avv_a1, en_b1, parz1, minmax_store_enable, comp4, allarme_terminale_disconnesso | 0 | 0 | Sensor is out of range |
| 1.3.6.1.4.1.9839.2.1.1.17 | maint-alm, al-q-comp6, al_comp_ol, mal-eap, sbrinam_on, minmax_store_enable, modo_speciale, compressor6, sbrinamento_on, dout_8, cont_avv_a2, en_b2, parz2, night_reg_probe, rich_parz14, defrost_st_1 | 0 | 0 | Maintenance Schedule Due alarm |
| 1.3.6.1.4.1.9839.2.1.1.18 | c1-hp-alm, al-q-fan-1, al_freecool, mal-filter, night_reg_probe, tipo_out_grad4, compressor7, all_sbrinamento, dout_9, en_b3, valfre, al_probe1, di5, haccp_reset, rich_parz24 | 0 | 0 | High pressure alarm |
| 1.3.6.1.4.1.9839.2.1.1.19 | c1-lp-alm, al-q-fan-2, al_humidif, mal-flood, haccp_reset, tipo_out_grad3, compressor8, all_antigelo, dout_10, en_b4, valfre1, al_probe2, di6, comp5, defrost_st_2 | 0 | 0 | Low pressure alarm |
| 1.3.6.1.4.1.9839.2.1.1.20 | alarmAccess, al-q-fan11, c2-hp-alm, al_room_lt, mal-flux, tipo_out_grad2, compressor9, all_agelo_sonda, dout_11, resistenza1, en_b5, valca, al_ext_id, ag, rich_parz15, all_h_press_c1 | 0 | 0 | Tampering Alarm |
| 1.3.6.1.4.1.9839.2.1.1.21 | alarmRoomHT, al-q-fan12, c2-lp-alm, al_room_ht, mal-heater, tipo_out_grad1, compressor10, all_sovratens, dout_12, resistenza2, en_b6, valca1, al_low_temp, at1h, rich_parz25, all_l_press_c1, ko_b1 | 0 | 0 | Alarm: Room High Temperature |
| 1.3.6.1.4.1.9839.2.1.1.22 | alarmRoomLT, al-q-fan13, smoke-alm, al_room_lh, mal-hp1, compressor11, all_sottotens, dout_13, umidifica, en_b7, glb_al, al_hi_temp, at1l, comp6, all_term_compc1, ko_b2 | 0 | 0 | Alarm: Room Low Temperature |
| 1.3.6.1.4.1.9839.2.1.1.23 | alarmRoomHH, al-q-fan14, wtr-flow-alm, al_room_hh, mal-hp2, mask_dif_olio1, fan1, ventilatore1, en_b8, s_firmanook, al_ee, at2h, rich_parz16, all_term_fanc1, id_al_immdt_sel | 0 | 0 | Alarm: Room High Humidity |
| 1.3.6.1.4.1.9839.2.1.1.24 | alarmRoomLH, al-q-fan21, disch-air-fail, al_generic_ext, mal-lp1, mask_dif_olio2, fan2, ventilatore2, superv_onoff, s_error_io, at2l, rich_parz26, all_flusso, id_al_dlyd_sel | 0 | 0 | Alarm: Room Low Humidity |
| 1.3.6.1.4.1.9839.2.1.1.25 | alarmRoomEAP, al-q-fan22, ra-tmp-hi-alm, al_fan_maint, mal-lp2, mask_dif_olio3, fan3, stato_pompa, en_start_restr, s_bp1, at3h, din1, lowt | 0 | 0 | Room T+H Limits by External Sensors |
| 1.3.6.1.4.1.9839.2.1.1.26 | alarmFilter, al-q-fan-23, ra-tmp-lo-alm, al_filter_maint, mal-phase, c_f__5, fan4, stato_compress, glb_al, en_modulation, s_bp2, comp_status, at3l, din2, est_inv, hight | 0 | 0 | Alarm: Clogged Filter |
| 1.3.6.1.4.1.9839.2.1.1.27 | alarmFlood, al-q-fan24, hum-hi-alm, al_comp1_maint, mal-smoke, en_ed_alarm, fan5, stato_resists, mask_term1, sun_win_sel, s_fl1, fan_status, at4h, din3, all_h_press_c2, def_al | 0 | 0 | Alarm: Water Leakage Detected |
| 1.3.6.1.4.1.9839.2.1.1.28 | alarmAirFlow, al-idrofrigo-pump1, hum-lo-alm, al_comp2_maint, mal-lan, mask_pres_lpres, fan6, stato_valvola, master, mask_term2, s_trf, defrost_status, at4l, din4, all_l_press_c2 | 0 | 0 | Alarm: Loss of Air Flow |
| 1.3.6.1.4.1.9839.2.1.1.29 | alarmHeater, al-idrofrigo-pump2, fan-overload, al_low_c_ee, mal-hcurr, def_uni_up, mask_pres_hpres, fan7, slave, mask_press_h1, cooling_heating, s_trs1, aux_status, af1, dig_in_1, din5, all_term_compc2 | 0 | 0 | Alarm: Heater Overheating |
| 1.3.6.1.4.1.9839.2.1.1.30 | alarmHP1, al-phase-cont, stdby-pump-on, al_volt_lack, mal-nopower, def_pri, mask_liv_liq, fan8, stato_ventils, en_b1, mask_press_h2, inverter, s_trs2, af2, dig_in_2, din6, all_term_fanc2 | 0 | 0 | Alarm: Circuit 1 High Pressure |
| 1.3.6.1.4.1.9839.2.1.1.31 | alarmHP2, al-door-sw, cust-msg-sw1, al_smoke_fire, mal-nowater, time_base_dc, fan9, en_b2, mask_antigelo, s_fsa, din7 | 0 | 0 | Alarm: Circuit 1 High Pressure |
| 1.3.6.1.4.1.9839.2.1.1.32 | alarmLP1, compressor-FlowRate, cust-msg-sw2, mal-cw-dh, mask_term_vent1, fan10, en_b3, mask_q14, s_flt, din8, rich_manut_c2 | 0 | 0 | Alarm: Circuit 1 Low Pressure |
| 1.3.6.1.4.1.9839.2.1.1.33 | alarmLP2, setpoint-inv-pumps, cust-msg-sw3, unit_status, mal-tc-cw, stop_fan_f2, mask_term_vent2, fan11, en_b4, mask_q15, s_all_h_temp, af5, s_comp, din9, all_antigelo_c1 | 0 | 0 | Alarm: Circuit 2 Low Pressure |
| 1.3.6.1.4.1.9839.2.1.1.34 | alarmEXV1, enable-pumps-redundance, cust-msg-sw4, comp1_status, mal-wflow, stop_fan_f3, mask_term_vent3, en_b5, mask_q3, s_all_l_temp, af6, s_fan, din10, all_antigelo_c2 | 0 | 0 | Alarm: Circuit 1 Electronic Valve Failure |
| 1.3.6.1.4.1.9839.2.1.1.35 | alarmEXV2, enable-chiller-redundance, humsw-inhibit, comp2_status, mal-wht, s_comp, en_b6, mask_q4, s_all_h_umid, di_glb_status, as1, s_defrost, din11, all_defrost_c1 | 0 | 0 | Alarm: Circuit 2 Electronic Valve Failure |
| 1.3.6.1.4.1.9839.2.1.1.36 | alarmPSE, status-in-alarm, heat-inhibit, heater1_status, mal-sonda-ta, s_fan, en_b7, mask_q5, s_all_l_umid, instr_connect, as2, s_aux_2, din12, all_defrost_c2 | 0 | 0 | Alarm: Wrong Phase Sequence |
| 1.3.6.1.4.1.9839.2.1.1.38 | alarmLAN, enable-thermal-redundance, disch-tmp-lo-alm, fan_status, mal-sonda-tc, mask_ore_comp2, s_aux_2, bassa_press1, s_al_ore_comp2, i2c_int_fail, as4, din14, tsonda_outev__2, lost2 | 0 | 0 | Interrupted LAN Alarm |
| 1.3.6.1.4.1.9839.2.1.1.39 | alarmHUHC, enable-multi-pumps-function, override-alm, deshum_status, mal-sonda-te, m_def, mask_ore_comp3, bassa_press2, s_al_ore_umidif, ahw, s_light, din15, lost3 | 0 | 0 | Alarm: Humidifier High Current |
| 1.3.6.1.4.1.9839.2.1.1.40 | alarmHUPL, enable-pumps-offline, condensation-alm, mal-sonda-tm, unita_misura, main_pump, mask_interbl, s_al_ore_mac, td1, dr_supervisor, din16, out_per_fan_f1, lost4 | 0 | 0 | Alarm: Humidifier Power Loss |
| 1.3.6.1.4.1.9839.2.1.1.41 | alarmHUWL, enable-3way-valve, unit-in-standby, humid_on, mal-sonda-ua, out_per_fan_f1, cond_pump, mask_defrost1, s_al_ore_res1, td2, dr_svendreq, din17, defr_antig_d1, lost5 | 0 | 0 | Alarm: Humidifier Water Loss |
| 1.3.6.1.4.1.9839.2.1.1.42 | alarmCWDHT, enable-speed-up-FCM, cw-sns-fail, mal-ore-compr1, int_display, mask_alta_mand, all_alta_temp, mal_maint_dev1, esecuz_sbrin_d1, superv_onoff, mask_defrost2, s_al_ore_res2, din18, lostm | 0 | 0 | Alarm: CW Temperature too High for Dehumidification |
| 1.3.6.1.4.1.9839.2.1.1.43 | alarmCWF, enable-soft-start-FCM, humsw-chk-cyl, mal-ore-compr2, en_max_min, mask_alta_asp, all_bassa_temp, mal_maint_dev2, def_time_tmp_d2, mask_filtro, s_all_h_free, all_pres_lpres, num_fan_h2, rtc_al | 0 | 0 | Alarm: CW Valve Failure or Water Flow too Low |
| 1.3.6.1.4.1.9839.2.1.1.44 | alarmCWFF, enable-freecooling, bms-cooling-inhibit, mal-ore-compr3, blocco_vis_sbrin, all_clean_management, mal_maint_dev3, res_gelo_sbr_db, sum_win_sup, mask_term_res, s_all_l_free, td5, a1_e1, all_pres_hpres, num_evap_h3 | 0 | 0 | Alarm: Loss of Water Flow |
| 1.3.6.1.4.1.9839.2.1.1.45 | alarmCWHT, enable-rot-FIFO-FC, bms-heat-inhibit, al_fan1_ol, mal-ore-compr4, all_def_tout, mal_maint_dev4, en_sonda_res_a6, en_pompacalore, s_sonda1_ko, td6, a1_e2, din101, compr_parz_h4, rem1 | 0 | 0 | Alarm: High Chilled Water Temperature |
| 1.3.6.1.4.1.9839.2.1.1.46 | alarmRTS, enable-HT-function, bms-humidifier-inhibit, al_fan2_ol, mal-ore-filtro, mask_ora, all_driver_lan, mal_maint_dev5, all_lp_sonda_p7, en_freecooling, en_orologio, mal_freeze, s_sonda2_ko, ct, a1_e3, din102, en_din_e_i_h6, rem2 | 0 | 0 | Alarm: Room Temp. Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.47 | alarmHWS, enable-PID-Fc-valve, bms-dehum-inhibit, mal-ore-risc1, all_driver_probe_1, dr_supervisor, mal_maint_dev6, en_id_on_off_h7, en_aa_unit, en_umidita, mal_comp, s_sonda4_ko, buzz, a1_ia, din103, en_din_a_s_h7, rem3 | 0 | 0 | Alarm: Hot Water Temp. Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.48 | alarmCWS, enable-Fc-Thermal-Exclusion, fan-inhibit-bms, mal-ore-risc2, mask_epromnook, all_driver_probe_2, dr_svendreq, mal_maint_dev7, all_lp_comp_pa, en_ww_unit, en_mandata, mal_evap_flow, s_sonda6_ko, rele1_stato, a1_da, din104, num_termin_h8, rem4 | 0 | 0 | Alarm: Chilled Water Temp. Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.49 | alarmOTS, manual-Reset-Ext-Drycooler-Alarm, hum-expect, on_off, mal-ore-umid, mask_bassa_asp, mal_maint_dev8, en_set2_hc, sum_win_sel, mal_cond_flow, s_sondau_ko, a1_ea, din105, num_compressori, rem5 | 0 | 0 | Alarm: Outdoor Temperature Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.50 | alarmDTS, enable-static-press-Alarm, usashr-f-c, measunit, mal-ore-unit, all_duty_set, mal_maint_dev9, inv_est_inv_hd, en_sum_win, en_supervisore, mal_high_press, a1_re, din106, comp_rot_r5 | 0 | 0 | Alarm: Delivery Air Temp. Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.51 | alarmRHS, manual-reset-static-press-Alarm, glb-al, glb_al, all_ext_del, a1_e1, mal_maint_dev10, sel_rele_all_hf, cooling_heating, en_stampante, mal_oil_level, s_epromnook, a1_id, din107, def_ext_da | 0 | 0 | Alarm: Room Humidity Sensor Failed/Disconnected |