OID reference
1.3.6.1.4.1.9839.2.1.1.8
reheat during dehum
Identification
{1 3 6 1 4 1 9839 2 1 1 8}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.9839.2.1.1.8.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 23 distinct definitions; some records may not include a definition.
out-h3 OBJECT-TYPE
SYNTAX Integer32
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Heating 3"
::= { digitalObjects 8 }mtd6 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Segnalated in case of defrost timeout from input 6"
DEFVAL { 0 }
::= { digitalObjects 8 }dout_7 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Capacity control 2"
::= { digitalObjects 8 }rht-during-dehum OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "reheat during dehum"
DEFVAL { 0 }
::= { digitalObjects 8 }fan_cfg OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Fan management"
DEFVAL { 0 }
::= { digitalObjects 8 }fan_cmp_off_f2 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "flags"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Fans off with compressor off"
DEFVAL { 1 }
::= { digitalObjects 8 }al_clock OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "clock board faulty or not connected"
::= { digitalObjects 8 }vent2 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of fan no.2"
::= { digitalObjects 8 }rich_parz11 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of capacity-control 1 compressor 1"
::= { digitalObjects 8 }al-idrofrigo-fl1 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Flow switch alarm"
::= { digitalObjects 8 }alrlowtempprobe1 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Alarm low temperature probe 1"
::= { digitalObjects 8 }all_eeprom OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Data memorization error (ea, ee, eb)"
::= { digitalObjects 8 }valv_inv_c2 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "flag"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of evaporations (circuit n.2)"
DEFVAL { 0 }
::= { digitalObjects 8 }buzzer OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Buzzer command."
::= { digitalObjects 8 }all_flusso OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Flowmeter alarm"
::= { digitalObjects 8 }en_exenq_5 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable trasmission pressure probe from Master to Slaves"
DEFVAL { 0 }
::= { digitalObjects 8 }all_sonda_0 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Probe 1 error"
::= { digitalObjects 8 }device8 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status device 8"
::= { digitalObjects 8 }all_sonda_0 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Probe 1 error (er0)"
::= { digitalObjects 8 }all_eeprom OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Data memorization error"
::= { digitalObjects 8 }onr OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "ON / OFF remote"
::= { digitalObjects 8 }start_stop OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Remote ON / OFF"
DEFVAL { 0 }
::= { digitalObjects 8 }defrost_show OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "flag"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Display blocking during defrosting"
DEFVAL { 1 }
::= { digitalObjects 8 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
Heating 3
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 3
Segnalated in case of defrost timeout from input 6
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 4
Capacity control 2
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 5
Fan management
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 6
Fans off with compressor off
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 7
clock board faulty or not connected
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 8
Status of fan no.2
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 9
Status of capacity-control 1 compressor 1
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 10
Flow switch alarm
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 11
Alarm low temperature probe 1
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 12
Data memorization error (ea, ee, eb)
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 13
Number of evaporations (circuit n.2)
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 14
Buzzer command.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 15
Flowmeter alarm
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 16
Enable trasmission pressure probe from Master to Slaves
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 17
Probe 1 error
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 18
Status device 8
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 19
Probe 1 error (er0)
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 20
Data memorization error
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 21
ON / OFF remote
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 22
Remote ON / OFF
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 23
Display blocking during defrosting
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: out-h3
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"out-h3",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Heating 3\"",
"::=",
"{",
"digitalObjects",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Heating 3"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: UNCDZ-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Status in source: current.
Names: mtd6
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mtd6",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Segnalated in case of defrost timeout from input 6\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"digitalObjects",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Segnalated in case of defrost timeout from input 6"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mio-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: dout_7
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dout_7",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Capacity control 2\"",
"::=",
"{",
"digitalObjects",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Capacity control 2"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-screw_compressor-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: rht-during-dehum
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rht-during-dehum",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"reheat during dehum\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"digitalObjects",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"reheat during dehum"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the LibreNMS archive.
Module: DataAire-dap4-al-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: DataAire-dap4-al-MIB
Same published definition (formatting differs; exact original is in the source file)
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: fan_cfg
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fan_cfg",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Fan management\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"digitalObjects",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Fan management"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-powersplit-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: fan_cmp_off_f2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fan_cmp_off_f2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"22666c61677322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Fans off with compressor off\"",
"DEFVAL",
"{",
"1",
"}",
"::=",
"{",
"digitalObjects",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"flags"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Fans off with compressor off"
],
null,
null,
null,
[
"DEFVAL",
1
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-plugin-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: al_clock
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"al_clock",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"clock board faulty or not connected\"",
"::=",
"{",
"digitalObjects",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"clock board faulty or not connected"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uac-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: vent2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"vent2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Status of fan no.2\"",
"::=",
"{",
"digitalObjects",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Status of fan no.2"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-cfp_ncp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: rich_parz11
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rich_parz11",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Status of capacity-control 1 compressor 1\"",
"::=",
"{",
"digitalObjects",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Status of capacity-control 1 compressor 1"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-fcp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: al-idrofrigo-fl1
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"al-idrofrigo-fl1",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Flow switch alarm\"",
"::=",
"{",
"digitalObjects",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Flow switch alarm"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: KELVIN-pCOWeb-Chiller-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Same file in Observium Community.
Status in source: current.
Names: alrlowtempprobe1
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"alrlowtempprobe1",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Alarm low temperature probe 1\"",
"::=",
"{",
"digitalObjects",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Alarm low temperature probe 1"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-wlprobe-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: all_eeprom
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"all_eeprom",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Data memorization error (ea, ee, eb)\"",
"::=",
"{",
"digitalObjects",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Data memorization error (ea, ee, eb)"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-ir_32-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: valv_inv_c2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"valv_inv_c2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"22666c616722"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Number of evaporations (circuit n.2)\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"digitalObjects",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"flag"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Number of evaporations (circuit n.2)"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uchiller-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: buzzer
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"buzzer",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Buzzer command.\"",
"::=",
"{",
"digitalObjects",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Buzzer command."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-aria-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: all_flusso
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"all_flusso",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Flowmeter alarm\"",
"::=",
"{",
"digitalObjects",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Flowmeter alarm"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uchiller_cmp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: en_exenq_5
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"en_exenq_5",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Enable trasmission pressure probe from Master to Slaves\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"digitalObjects",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Enable trasmission pressure probe from Master to Slaves"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mastercase-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: all_sonda_0
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"all_sonda_0",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Probe 1 error\"",
"::=",
"{",
"digitalObjects",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Probe 1 error"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-ir32un_ap-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: device8
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"device8",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Status device 8\"",
"::=",
"{",
"digitalObjects",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Status device 8"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-insgrd-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: all_sonda_0
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"all_sonda_0",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Probe 1 error (er0)\"",
"::=",
"{",
"digitalObjects",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Probe 1 error (er0)"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-ir32un_t-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: all_eeprom
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"all_eeprom",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Data memorization error\"",
"::=",
"{",
"digitalObjects",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Data memorization error"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mcella-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: onr
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"onr",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"ON / OFF remote\"",
"::=",
"{",
"digitalObjects",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"ON / OFF remote"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-cdz_pco-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: start_stop
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"start_stop",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Remote ON / OFF\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"digitalObjects",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Remote ON / OFF"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-rtop_pco-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: defrost_show
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"defrost_show",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"22666c616722"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Display blocking during defrosting\"",
"DEFVAL",
"{",
"1",
"}",
"::=",
"{",
"digitalObjects",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"flag"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Display blocking during defrosting"
],
null,
null,
null,
[
"DEFVAL",
1
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mastercellasplit-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9839.2.1.1.1 | systemOn, al-pa1, dehum-on, vent-on, ciclo_continuo, on_off_status, cent_fhren_flag, diginput1, stato_id_1, device1, est_inv, syson_s, id1, z1, unit_meas__5, buz, scheda_modem, res_antig_c1, dig_output1 | 0 | 0 | System On (Fan) |
| 1.3.6.1.4.1.9839.2.1.1.2 | compressore1, al-pa2, hum-on, ventilatori, comp1, en_dec_point, autoscale, diginput2, stato_id_2, device2, on_off_unita, dout_1, id2, en_alm_ed_r3, cf, present_expansion, dig_output2 | 0 | 0 | Compressor 1 |
| 1.3.6.1.4.1.9839.2.1.1.3 | compressore2, al-pb1, engy-on, al_eeprom, comp2, defrost_con_sonda_3, defrostprobeselect, alrlowbatt, stato_ud_1, device3, dout_2, id3, z3, fan_mode_f0, mtd1, fan1, valv_inv_c1, dig_output3 | 0 | 0 | Compressor 2 |
| 1.3.6.1.4.1.9839.2.1.1.4 | compressore3, al-pb2, cool-inhibit, al_b1_ko, compressor, comp3, enable_ed_alarm, sel_probe_term, alrprobefault, stato_ud_2, device4, dout_3, reset_allarmi, z4, start_def_on_d4, mtd2, defrost_cmd, fan2, dig_output4 | 0 | 0 | Compressor 3 |
| 1.3.6.1.4.1.9839.2.1.1.5 | compressore4, heat-held, al_b2_ko, aux_out, enable_monitor_temp_maxmin, pd_autostart_enable, stato_ud_3, device5, allarme_hp, dout_4, reset_hardware, z5, stop_vis_def_d6, defrost_at_startup, fan3, allarme | 0 | 0 | Compressor 4 |
| 1.3.6.1.4.1.9839.2.1.1.6 | heating1, al-le, humidifier-inhibit, al_b3_ko, out-h1, valv_inv_ciclo, regol_notturna_sonda_3, defrost_cmd, alrhightempprobe1, stato_ud_4, device6, allarme_lp, dout_5, forza_invio_parametri, z6, def_priority_d9, defrost_show, fan4, antifreeze_resist_c2 | 0 | 0 | Heating 1 |
| 1.3.6.1.4.1.9839.2.1.1.7 | heating2, dehum-inhibit, al_b4_ko, out-h2, vent1, disable_pid, defrost_at_startup, alrhightempprobe2, device7, dout_6, stato_uscite_remoto, z7, time_base_dc, mtd5, defrost_priority, comp1, compressore_c2 | 0 | 0 | Heating 2 |
| 1.3.6.1.4.1.9839.2.1.1.9 | hotGasCoil, static-press-alarm, floor-wtr-alm, al_hp_ckt1, gas-caldo-on, all_timeout_def, vent3, pressure_probe_from_master, defrost_priority, alrlowtempprobe2, all_sonda_1, device9, err_sonda_b3, dout_8, allarme_remoto, z9, fan_off_def_f3, rele1_pwup, fan_off_ctrl, rich_parz21, err_sonda_s1 | 0 | 0 | Hot Gas Coil |
| 1.3.6.1.4.1.9839.2.1.1.10 | dehumidification, w-static-press-alarm, air-flow-alm, al_hp_ckt2, on-deum, all_bassa_temp, fan_cfg, hightempalrenabled, all_eeprom, device10, err_sonda_b2, dout_1, dout_9, id1_remoto, z10, dis_buzzer_h4, fan_defrost_ctrl, comp2, err_sonda_s2 | 0 | 0 | Dehumidification |
| 1.3.6.1.4.1.9839.2.1.1.11 | humidification, flow-value-alarm, filter-alm, al_lp_ckt1, power, all_alta_temp, fan_off_ctrl, diginputpol1, all_id_1, err_sonda_b1, dout_2, dout_10, id2_remoto, z12, dis_keyb_h2, keyb_disabled, rich_parz12, err_sonda_s3, dig_input1 | 0 | 0 | Humidification |
| 1.3.6.1.4.1.9839.2.1.1.12 | emerg, al-q-comp1, humidifier-alm, al_lp_ckt2, mal-access, all_sonda_amb, sys_on, fan_defrost_ctrl, diginputpol2, all_alta_temp, compressor1, dout_3, dout_11, id3_remoto, val_par, vis_probe__4, loc_on_off_ena, rich_parz22, err_sonda_s4, dig_input2 | 0 | 0 | Main Power Loss |
| 1.3.6.1.4.1.9839.2.1.1.13 | firestat-alm, al-q-comp2, al_flow_sw, mal-ata, all_sonda_def, mask_term_klix1, keyb_disabled, alrdefrost, all_bassa_temp, compressor2, err_eeprom_s, dout_4, dout_12, stato_regolazione, syson2, buzz_pwup, lan_on_off_ena, comp3, err_sonda_s5 | 0 | 0 | Temperature of return air above firestat alarm set point |
| 1.3.6.1.4.1.9839.2.1.1.14 | shortcycle-alm, al-q-comp3, al_clogged_fl, mal-bta, all_imm_ai, mask_term_klix2, prop_prop_int, compressor3, dout_5, dout_13, sbrinamento_manuale, val_es_ok, di1, lan_din, rich_parz13, err_eeprom | 0 | 0 | One or more comps has short cycled |
| 1.3.6.1.4.1.9839.2.1.1.15 | humidity-fail, al-q-comp4, al_heaters_ol, mal-aua, all_rit_ad, mask_term_klix3, tipo_sonda, compressor4, dout_6, ventilatore_p, en_evap_flow_al, forzatura_on, umidifica, di2, defrost_tout_alarm_ena, rich_parz23, freq_rete | 0 | 0 | Sensor is out of range |
| 1.3.6.1.4.1.9839.2.1.1.16 | ret-air-fail, al-q-comp5, al_fan_ol, mal-bua, defrost_tout_alarm_ena, celsius_farhan, compressor5, all_termin_off, dout_7, cont_avv_a1, en_b1, parz1, minmax_store_enable, comp4, allarme_terminale_disconnesso | 0 | 0 | Sensor is out of range |
| 1.3.6.1.4.1.9839.2.1.1.17 | maint-alm, al-q-comp6, al_comp_ol, mal-eap, sbrinam_on, minmax_store_enable, modo_speciale, compressor6, sbrinamento_on, dout_8, cont_avv_a2, en_b2, parz2, night_reg_probe, rich_parz14, defrost_st_1 | 0 | 0 | Maintenance Schedule Due alarm |
| 1.3.6.1.4.1.9839.2.1.1.18 | c1-hp-alm, al-q-fan-1, al_freecool, mal-filter, night_reg_probe, tipo_out_grad4, compressor7, all_sbrinamento, dout_9, en_b3, valfre, al_probe1, di5, haccp_reset, rich_parz24 | 0 | 0 | High pressure alarm |
| 1.3.6.1.4.1.9839.2.1.1.19 | c1-lp-alm, al-q-fan-2, al_humidif, mal-flood, haccp_reset, tipo_out_grad3, compressor8, all_antigelo, dout_10, en_b4, valfre1, al_probe2, di6, comp5, defrost_st_2 | 0 | 0 | Low pressure alarm |
| 1.3.6.1.4.1.9839.2.1.1.20 | alarmAccess, al-q-fan11, c2-hp-alm, al_room_lt, mal-flux, tipo_out_grad2, compressor9, all_agelo_sonda, dout_11, resistenza1, en_b5, valca, al_ext_id, ag, rich_parz15, all_h_press_c1 | 0 | 0 | Tampering Alarm |
| 1.3.6.1.4.1.9839.2.1.1.21 | alarmRoomHT, al-q-fan12, c2-lp-alm, al_room_ht, mal-heater, tipo_out_grad1, compressor10, all_sovratens, dout_12, resistenza2, en_b6, valca1, al_low_temp, at1h, rich_parz25, all_l_press_c1, ko_b1 | 0 | 0 | Alarm: Room High Temperature |
| 1.3.6.1.4.1.9839.2.1.1.22 | alarmRoomLT, al-q-fan13, smoke-alm, al_room_lh, mal-hp1, compressor11, all_sottotens, dout_13, umidifica, en_b7, glb_al, al_hi_temp, at1l, comp6, all_term_compc1, ko_b2 | 0 | 0 | Alarm: Room Low Temperature |
| 1.3.6.1.4.1.9839.2.1.1.23 | alarmRoomHH, al-q-fan14, wtr-flow-alm, al_room_hh, mal-hp2, mask_dif_olio1, fan1, ventilatore1, en_b8, s_firmanook, al_ee, at2h, rich_parz16, all_term_fanc1, id_al_immdt_sel | 0 | 0 | Alarm: Room High Humidity |
| 1.3.6.1.4.1.9839.2.1.1.24 | alarmRoomLH, al-q-fan21, disch-air-fail, al_generic_ext, mal-lp1, mask_dif_olio2, fan2, ventilatore2, superv_onoff, s_error_io, at2l, rich_parz26, all_flusso, id_al_dlyd_sel | 0 | 0 | Alarm: Room Low Humidity |
| 1.3.6.1.4.1.9839.2.1.1.25 | alarmRoomEAP, al-q-fan22, ra-tmp-hi-alm, al_fan_maint, mal-lp2, mask_dif_olio3, fan3, stato_pompa, en_start_restr, s_bp1, at3h, din1, lowt | 0 | 0 | Room T+H Limits by External Sensors |
| 1.3.6.1.4.1.9839.2.1.1.26 | alarmFilter, al-q-fan-23, ra-tmp-lo-alm, al_filter_maint, mal-phase, c_f__5, fan4, stato_compress, glb_al, en_modulation, s_bp2, comp_status, at3l, din2, est_inv, hight | 0 | 0 | Alarm: Clogged Filter |
| 1.3.6.1.4.1.9839.2.1.1.27 | alarmFlood, al-q-fan24, hum-hi-alm, al_comp1_maint, mal-smoke, en_ed_alarm, fan5, stato_resists, mask_term1, sun_win_sel, s_fl1, fan_status, at4h, din3, all_h_press_c2, def_al | 0 | 0 | Alarm: Water Leakage Detected |
| 1.3.6.1.4.1.9839.2.1.1.28 | alarmAirFlow, al-idrofrigo-pump1, hum-lo-alm, al_comp2_maint, mal-lan, mask_pres_lpres, fan6, stato_valvola, master, mask_term2, s_trf, defrost_status, at4l, din4, all_l_press_c2 | 0 | 0 | Alarm: Loss of Air Flow |
| 1.3.6.1.4.1.9839.2.1.1.29 | alarmHeater, al-idrofrigo-pump2, fan-overload, al_low_c_ee, mal-hcurr, def_uni_up, mask_pres_hpres, fan7, slave, mask_press_h1, cooling_heating, s_trs1, aux_status, af1, dig_in_1, din5, all_term_compc2 | 0 | 0 | Alarm: Heater Overheating |
| 1.3.6.1.4.1.9839.2.1.1.30 | alarmHP1, al-phase-cont, stdby-pump-on, al_volt_lack, mal-nopower, def_pri, mask_liv_liq, fan8, stato_ventils, en_b1, mask_press_h2, inverter, s_trs2, af2, dig_in_2, din6, all_term_fanc2 | 0 | 0 | Alarm: Circuit 1 High Pressure |
| 1.3.6.1.4.1.9839.2.1.1.31 | alarmHP2, al-door-sw, cust-msg-sw1, al_smoke_fire, mal-nowater, time_base_dc, fan9, en_b2, mask_antigelo, s_fsa, din7 | 0 | 0 | Alarm: Circuit 1 High Pressure |
| 1.3.6.1.4.1.9839.2.1.1.32 | alarmLP1, compressor-FlowRate, cust-msg-sw2, mal-cw-dh, mask_term_vent1, fan10, en_b3, mask_q14, s_flt, din8, rich_manut_c2 | 0 | 0 | Alarm: Circuit 1 Low Pressure |
| 1.3.6.1.4.1.9839.2.1.1.33 | alarmLP2, setpoint-inv-pumps, cust-msg-sw3, unit_status, mal-tc-cw, stop_fan_f2, mask_term_vent2, fan11, en_b4, mask_q15, s_all_h_temp, af5, s_comp, din9, all_antigelo_c1 | 0 | 0 | Alarm: Circuit 2 Low Pressure |
| 1.3.6.1.4.1.9839.2.1.1.34 | alarmEXV1, enable-pumps-redundance, cust-msg-sw4, comp1_status, mal-wflow, stop_fan_f3, mask_term_vent3, en_b5, mask_q3, s_all_l_temp, af6, s_fan, din10, all_antigelo_c2 | 0 | 0 | Alarm: Circuit 1 Electronic Valve Failure |
| 1.3.6.1.4.1.9839.2.1.1.35 | alarmEXV2, enable-chiller-redundance, humsw-inhibit, comp2_status, mal-wht, s_comp, en_b6, mask_q4, s_all_h_umid, di_glb_status, as1, s_defrost, din11, all_defrost_c1 | 0 | 0 | Alarm: Circuit 2 Electronic Valve Failure |
| 1.3.6.1.4.1.9839.2.1.1.36 | alarmPSE, status-in-alarm, heat-inhibit, heater1_status, mal-sonda-ta, s_fan, en_b7, mask_q5, s_all_l_umid, instr_connect, as2, s_aux_2, din12, all_defrost_c2 | 0 | 0 | Alarm: Wrong Phase Sequence |
| 1.3.6.1.4.1.9839.2.1.1.37 | alarmSmokeFire, compressor-recovery, rht-hum-inhibit, heater2_status, mal-sonda-tac, mask_ore_comp1, s_defrost, en_b8, mask_q6, s_al_ore_comp1, al_low_voltage, as3, s_alarm, din13, tsonda_inev__1, lost1 | 0 | 0 | Alarm: SMOKE-FIRE DETECTED |
| 1.3.6.1.4.1.9839.2.1.1.38 | alarmLAN, enable-thermal-redundance, disch-tmp-lo-alm, fan_status, mal-sonda-tc, mask_ore_comp2, s_aux_2, bassa_press1, s_al_ore_comp2, i2c_int_fail, as4, din14, tsonda_outev__2, lost2 | 0 | 0 | Interrupted LAN Alarm |
| 1.3.6.1.4.1.9839.2.1.1.39 | alarmHUHC, enable-multi-pumps-function, override-alm, deshum_status, mal-sonda-te, m_def, mask_ore_comp3, bassa_press2, s_al_ore_umidif, ahw, s_light, din15, lost3 | 0 | 0 | Alarm: Humidifier High Current |
| 1.3.6.1.4.1.9839.2.1.1.40 | alarmHUPL, enable-pumps-offline, condensation-alm, mal-sonda-tm, unita_misura, main_pump, mask_interbl, s_al_ore_mac, td1, dr_supervisor, din16, out_per_fan_f1, lost4 | 0 | 0 | Alarm: Humidifier Power Loss |
| 1.3.6.1.4.1.9839.2.1.1.41 | alarmHUWL, enable-3way-valve, unit-in-standby, humid_on, mal-sonda-ua, out_per_fan_f1, cond_pump, mask_defrost1, s_al_ore_res1, td2, dr_svendreq, din17, defr_antig_d1, lost5 | 0 | 0 | Alarm: Humidifier Water Loss |
| 1.3.6.1.4.1.9839.2.1.1.42 | alarmCWDHT, enable-speed-up-FCM, cw-sns-fail, mal-ore-compr1, int_display, mask_alta_mand, all_alta_temp, mal_maint_dev1, esecuz_sbrin_d1, superv_onoff, mask_defrost2, s_al_ore_res2, din18, lostm | 0 | 0 | Alarm: CW Temperature too High for Dehumidification |
| 1.3.6.1.4.1.9839.2.1.1.43 | alarmCWF, enable-soft-start-FCM, humsw-chk-cyl, mal-ore-compr2, en_max_min, mask_alta_asp, all_bassa_temp, mal_maint_dev2, def_time_tmp_d2, mask_filtro, s_all_h_free, all_pres_lpres, num_fan_h2, rtc_al | 0 | 0 | Alarm: CW Valve Failure or Water Flow too Low |
| 1.3.6.1.4.1.9839.2.1.1.44 | alarmCWFF, enable-freecooling, bms-cooling-inhibit, mal-ore-compr3, blocco_vis_sbrin, all_clean_management, mal_maint_dev3, res_gelo_sbr_db, sum_win_sup, mask_term_res, s_all_l_free, td5, a1_e1, all_pres_hpres, num_evap_h3 | 0 | 0 | Alarm: Loss of Water Flow |
| 1.3.6.1.4.1.9839.2.1.1.45 | alarmCWHT, enable-rot-FIFO-FC, bms-heat-inhibit, al_fan1_ol, mal-ore-compr4, all_def_tout, mal_maint_dev4, en_sonda_res_a6, en_pompacalore, s_sonda1_ko, td6, a1_e2, din101, compr_parz_h4, rem1 | 0 | 0 | Alarm: High Chilled Water Temperature |
| 1.3.6.1.4.1.9839.2.1.1.46 | alarmRTS, enable-HT-function, bms-humidifier-inhibit, al_fan2_ol, mal-ore-filtro, mask_ora, all_driver_lan, mal_maint_dev5, all_lp_sonda_p7, en_freecooling, en_orologio, mal_freeze, s_sonda2_ko, ct, a1_e3, din102, en_din_e_i_h6, rem2 | 0 | 0 | Alarm: Room Temp. Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.47 | alarmHWS, enable-PID-Fc-valve, bms-dehum-inhibit, mal-ore-risc1, all_driver_probe_1, dr_supervisor, mal_maint_dev6, en_id_on_off_h7, en_aa_unit, en_umidita, mal_comp, s_sonda4_ko, buzz, a1_ia, din103, en_din_a_s_h7, rem3 | 0 | 0 | Alarm: Hot Water Temp. Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.48 | alarmCWS, enable-Fc-Thermal-Exclusion, fan-inhibit-bms, mal-ore-risc2, mask_epromnook, all_driver_probe_2, dr_svendreq, mal_maint_dev7, all_lp_comp_pa, en_ww_unit, en_mandata, mal_evap_flow, s_sonda6_ko, rele1_stato, a1_da, din104, num_termin_h8, rem4 | 0 | 0 | Alarm: Chilled Water Temp. Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.49 | alarmOTS, manual-Reset-Ext-Drycooler-Alarm, hum-expect, on_off, mal-ore-umid, mask_bassa_asp, mal_maint_dev8, en_set2_hc, sum_win_sel, mal_cond_flow, s_sondau_ko, a1_ea, din105, num_compressori, rem5 | 0 | 0 | Alarm: Outdoor Temperature Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.50 | alarmDTS, enable-static-press-Alarm, usashr-f-c, measunit, mal-ore-unit, all_duty_set, mal_maint_dev9, inv_est_inv_hd, en_sum_win, en_supervisore, mal_high_press, a1_re, din106, comp_rot_r5 | 0 | 0 | Alarm: Delivery Air Temp. Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.51 | alarmRHS, manual-reset-static-press-Alarm, glb-al, glb_al, all_ext_del, a1_e1, mal_maint_dev10, sel_rele_all_hf, cooling_heating, en_stampante, mal_oil_level, s_epromnook, a1_id, din107, def_ext_da | 0 | 0 | Alarm: Room Humidity Sensor Failed/Disconnected |