OID reference
1.3.6.1.4.1.9839.2.1.3.18
Humidification Setpoint
Identification
{1 3 6 1 4 1 9839 2 1 3 18}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.9839.2.1.3.18.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 18 distinct definitions; some records may not include a definition.
set_comp2_cw OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "%"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Compressor 2 step without energy saving"
DEFVAL { 75 }
::= { integerObjects 18 }ventole_stop_in_sbrin OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Fans OFF during defrost"
DEFVAL { 1 }
::= { integerObjects 18 }max_ore_comp_cb OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "step"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Timer threshold for maintenance alarm"
DEFVAL { 0 }
::= { integerObjects 18 }offset_grad2 OBJECT-TYPE
SYNTAX Integer32 (-100..100)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "OUT2: Energization"
::= { integerObjects 18 }n2 OBJECT-TYPE
SYNTAX Integer32 (1..4)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Probe 2 associated at the digirtal input 1,2,3,4"
DEFVAL { 2 }
::= { integerObjects 18 }unit_model_h1 OBJECT-TYPE
SYNTAX Integer32 (0..3)
UNITS "flag"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Machine model"
DEFVAL { 0 }
::= { integerObjects 18 }rit_all_temp OBJECT-TYPE
SYNTAX Integer32 (0..199)
UNITS "min"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Temperature alarm delay"
DEFVAL { 120 }
::= { integerObjects 18 }hu-set OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "rH%"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Humidification Set Point"
::= { integerObjects 18 }sg_ore_comp OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Compressors hours threshold"
::= { integerObjects 18 }exist_probe__a OBJECT-TYPE
SYNTAX Integer32 (0..3)
UNITS "flag"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Defrostp probe presence"
DEFVAL { 3 }
::= { integerObjects 18 }humidSetp OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "rH%"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Humidification Setpoint"
::= { integerObjects 18 }min_volt_f3 OBJECT-TYPE
SYNTAX Integer32 (0..32767)
UNITS "step"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Minimum tension threshold for Triac"
DEFVAL { 35 }
::= { integerObjects 18 }current-hour OBJECT-TYPE
SYNTAX Integer32 (0..23)
UNITS "hour"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current hour"
DEFVAL { 0 }
::= { integerObjects 18 }month OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current month"
::= { integerObjects 18 }dly_valve_comp OBJECT-TYPE
SYNTAX Integer32 (0..60)
UNITS "sec."
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delay at the start of compressor"
DEFVAL { 10 }
::= { integerObjects 18 }defrost_delay OBJECT-TYPE
SYNTAX Integer32 (0..199)
UNITS "min"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Defrost delay at startup or dig. input"
DEFVAL { 0 }
::= { integerObjects 18 }dns1-4 OBJECT-TYPE
SYNTAX Integer32 (1..255)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "DNS (1) 4 (xxx.xxx.xxx.XXX)"
::= { integerObjects 18 }t_on_fan_f1 OBJECT-TYPE
SYNTAX Integer32 (-50..127)
UNITS "°C/°F"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Fan on temperature"
DEFVAL { 5 }
::= { integerObjects 18 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
Compressor 2 step without energy saving
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 3
Fans OFF during defrost
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 4
Timer threshold for maintenance alarm
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 5
OUT2: Energization
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 6
Probe 2 associated at the digirtal input 1,2,3,4
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 7
Machine model
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 8
Temperature alarm delay
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 9
Humidification Set Point
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 10
Compressors hours threshold
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 11
Defrostp probe presence
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 12
Minimum tension threshold for Triac
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 13
Current hour
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 14
Current month
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 15
Delay at the start of compressor
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 16
Defrost delay at startup or dig. input
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 17
DNS (1) 4 (xxx.xxx.xxx.XXX)
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 18
Fan on temperature
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: set_comp2_cw
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"set_comp2_cw",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"100",
")",
"UNITS",
[
"literal",
"222522"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Compressor 2 step without energy saving\"",
"DEFVAL",
"{",
"75",
"}",
"::=",
"{",
"integerObjects",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
100
]
]
]
],
[
"UNITS",
"%"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Compressor 2 step without energy saving"
],
null,
null,
null,
[
"DEFVAL",
75
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-cdz_pco-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Status in source: current.
Names: ventole_stop_in_sbrin
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ventole_stop_in_sbrin",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Fans OFF during defrost\"",
"DEFVAL",
"{",
"1",
"}",
"::=",
"{",
"integerObjects",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Fans OFF during defrost"
],
null,
null,
null,
[
"DEFVAL",
1
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mastercase-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: max_ore_comp_cb
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"max_ore_comp_cb",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"100",
")",
"UNITS",
[
"literal",
"227374657022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Timer threshold for maintenance alarm\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"integerObjects",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
100
]
]
]
],
[
"UNITS",
"step"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Timer threshold for maintenance alarm"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uchiller-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: offset_grad2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"offset_grad2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"100",
".",
".",
"100",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"OUT2: Energization\"",
"::=",
"{",
"integerObjects",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-100,
100
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"OUT2: Energization"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-ir32un_t-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Vendor MIB copy from the Observium Community archive.
Module: CAREL-ir32un_ap-MIB
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: n2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"n2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"1",
".",
".",
"4",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Probe 2 associated at the digirtal input 1,2,3,4\"",
"DEFVAL",
"{",
"2",
"}",
"::=",
"{",
"integerObjects",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
1,
4
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Probe 2 associated at the digirtal input 1,2,3,4"
],
null,
null,
null,
[
"DEFVAL",
2
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mio-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: unit_model_h1
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"unit_model_h1",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"3",
")",
"UNITS",
[
"literal",
"22666c616722"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Machine model\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"integerObjects",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
3
]
]
]
],
[
"UNITS",
"flag"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Machine model"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uac-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: rit_all_temp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rit_all_temp",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"199",
")",
"UNITS",
[
"literal",
"226d696e22"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Temperature alarm delay\"",
"DEFVAL",
"{",
"120",
"}",
"::=",
"{",
"integerObjects",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
199
]
]
]
],
[
"UNITS",
"min"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Temperature alarm delay"
],
null,
null,
null,
[
"DEFVAL",
120
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mcella-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Vendor MIB copy from the Observium Community archive.
Module: CAREL-ir_32-MIB
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: hu-set
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hu-set",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"2272482522"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Humidification Set Point\"",
"::=",
"{",
"integerObjects",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"rH%"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Humidification Set Point"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: UNCDZ-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: sg_ore_comp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"sg_ore_comp",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Compressors hours threshold\"",
"::=",
"{",
"integerObjects",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Compressors hours threshold"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-cfp_ncp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: exist_probe__a
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"exist_probe__a",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"3",
")",
"UNITS",
[
"literal",
"22666c616722"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Defrostp probe presence\"",
"DEFVAL",
"{",
"3",
"}",
"::=",
"{",
"integerObjects",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
3
]
]
]
],
[
"UNITS",
"flag"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Defrostp probe presence"
],
null,
null,
null,
[
"DEFVAL",
3
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-irmpx-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
· Download CAREL-irmpx-MIBStatus in source: current.
Names: humidSetp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"humidSetp",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"2272482522"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Humidification Setpoint\"",
"::=",
"{",
"integerObjects",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"rH%"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Humidification Setpoint"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: CAREL-ug40cdz-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'RFC1213-MIB': ['DisplayString'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Same file in Observium Community.
Status in source: current.
Names: min_volt_f3
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"min_volt_f3",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"227374657022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Minimum tension threshold for Triac\"",
"DEFVAL",
"{",
"35",
"}",
"::=",
"{",
"integerObjects",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
32767
]
]
]
],
[
"UNITS",
"step"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Minimum tension threshold for Triac"
],
null,
null,
null,
[
"DEFVAL",
35
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uchiller_cmp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: current-hour
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"current-hour",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"23",
")",
"UNITS",
[
"literal",
"22686f757222"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Current hour\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"integerObjects",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
23
]
]
]
],
[
"UNITS",
"hour"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Current hour"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the LibreNMS archive.
Module: DataAire-dap4-al-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Vendor MIB copy from the Observium Community archive.
Module: DataAire-dap4-al-MIB
Same published definition (formatting differs; exact original is in the source file)
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: month
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"month",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Current month\"",
"::=",
"{",
"integerObjects",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Current month"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-fcp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: dly_valve_comp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dly_valve_comp",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"60",
")",
"UNITS",
[
"literal",
"227365632e22"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Delay at the start of compressor\"",
"DEFVAL",
"{",
"10",
"}",
"::=",
"{",
"integerObjects",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
60
]
]
]
],
[
"UNITS",
"sec."
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Delay at the start of compressor"
],
null,
null,
null,
[
"DEFVAL",
10
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mastercellasplit-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: defrost_delay
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"defrost_delay",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"199",
")",
"UNITS",
[
"literal",
"226d696e22"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Defrost delay at startup or dig. input\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"integerObjects",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
199
]
]
]
],
[
"UNITS",
"min"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Defrost delay at startup or dig. input"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-powersplit-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: dns1-4
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dns1-4",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"1",
".",
".",
"255",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"DNS (1) 4 (xxx.xxx.xxx.XXX)\"",
"::=",
"{",
"integerObjects",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
1,
255
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"DNS (1) 4 (xxx.xxx.xxx.XXX)"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: KELVIN-pCOWeb-Chiller-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Same file in Observium Community.
Status in source: current.
Names: t_on_fan_f1
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"t_on_fan_f1",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"50",
".",
".",
"127",
")",
"UNITS",
[
"literal",
"22c2b0432fc2b04622"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Fan on temperature\"",
"DEFVAL",
"{",
"5",
"}",
"::=",
"{",
"integerObjects",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-50,
127
]
]
]
],
[
"UNITS",
"°C/°F"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Fan on temperature"
],
null,
null,
null,
[
"DEFVAL",
5
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-plugin-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9839.2.1.3.1 | filterWorkH, disch-air-lo-sp, ore-filtro, modello, id_firm_vers, probe_delay, hightempdelay, modo_funz_c0, velocita_vent, unit_status, mod, probe_stability, tipo_sonda__3 | 0 | 0 | Air Filter Working Houres |
| 1.3.6.1.4.1.9839.2.1.3.2 | unitWorkH, humidity-dis, ore-unit, type_defrost, stabilita_misura, virt_probe, defrostdelay, rit_2ins_c6, net_address, sonde, min_in_corr__4 | 0 | 0 | Unit Working Houres |
| 1.3.6.1.4.1.9839.2.1.3.3 | compr1WorkH, stages-on, ore-compr1, filter_digital, sonda_virtuale, defrostprobepresence, ampsignal, tmin_2out_c7, cound_fans_mng, a1, showprobe, max_in_corr__5 | 0 | 0 | Compressor 1 Run Hours |
| 1.3.6.1.4.1.9839.2.1.3.4 | compr2WorkH, heaters-on, ore-compr2, derivata, vis_ripetitore, showprobe_t, tmin_off_out_c8, config_type, a2, filtro_dig__b | 0 | 0 | Compressor 2 Run Hours |
| 1.3.6.1.4.1.9839.2.1.3.5 | compr3WorkH, minmax-24hr-hum-maximum, ore-compr3, virtual_probe, esiste_sonda, dig_in_term_cfg_1, tmin_on_c9, number_comps, defrostprobepresence, limitaz_in__c | 0 | 0 | Compressor 3 Run Hours |
| 1.3.6.1.4.1.9839.2.1.3.6 | compr4WorkH, ip-Address1, minmax-24hr-hum-minumum, ore-compr4, delay_from_startup, vis_terminale, dig_in_term_cfg_2, sicur_sonde, filtro_digitale, cond_fans, dig_in_cfg_1, tmin_on_comp_c1 | 0 | 0 | Compressor 4 Run Hours |
| 1.3.6.1.4.1.9839.2.1.3.7 | heat1WorkH, ip-Address2, comp-duty, ore-heat1, interval_between_2_start-up, config_in_digit_1, dig_in_cfg_1, rotazione, a5, dig_in_cfg_2 | 0 | 0 | Heater 1 Run Hours |
| 1.3.6.1.4.1.9839.2.1.3.8 | heat2WorkH, ip-Address3, heat-duty, ore-heat2, time_min_off, config_in_digit_2, dig_in_cfg_2, velocita_sonda, tmin_on_comp_c1, modalita_ventole, a6, alarm_input_delay, time_2_acc_c3 | 0 | 0 | Heater 2 Run Hours |
| 1.3.6.1.4.1.9839.2.1.3.9 | humiWorkH, ip-Address4, hum-duty, ore-umid, time_min_on, config_in_digit_3, alarm_input_delay, presenza_sonda, tmin_sp_comp_c2, d1, alarm_delay, msrmnt_stab__2 | 0 | 0 | Humidifier Run Hours |
| 1.3.6.1.4.1.9839.2.1.3.10 | c1-hours-h, netMask, safety_relay, n_comp, config_in_digit_4, alarm_delay, tempo_allarme, time_2_acc_c3, cu_remote_ctrl, ore_comp1, in_rampa_p, d2, comp_startup_delay, rit_off_2c_c5, prb_read_spd__3 | 0 | 0 | Compressor 1 Runtime -This point applies to DX unit with one compressor -high |
| 1.3.6.1.4.1.9839.2.1.3.11 | c1-hours-l, gateway1, fan_h_count_fa, duration_cc, n_vent, config_in_digit_5, comp_startup_delay, gestione_id1, rit_on_comp_c6, recover_mode, ore_comp2, fin_rampa_p, comp_s2s_delay, lhour, prb_virtual__4 | 0 | 0 | Compressor 1 Runtime -This point applies to DX unit with one compressor -low |
| 1.3.6.1.4.1.9839.2.1.3.12 | dehumPband, gateway2, c2-hours-h, filt_h_count_fc, hdiff, no_alarm_after_cc, lhour, time_delay_rilevaz_ingresso, comp_s2s_delay, gestione_id2, rit_c_on_pmp_c7, unit_status, in_rampa_n, comp_min_off_time, lminute, unit_msrmnt__5 | 0 | 0 | Dehumidification Prop.Band |
| 1.3.6.1.4.1.9839.2.1.3.13 | humidPband, gateway3, c2-hours-l, cmp1_h_count_c9, hu-diff, interval_between_defrost, lminute, config_virt_din, comp_min_off_time, sicur_all_id, off_p_off_v_c8, cond_fans_mng, fin_rampa_n, d5, comp_min_on_time, lday, off_p_off_c_c8, en_dec_point__6 | 0 | 0 | Humidification Prop.Band |
| 1.3.6.1.4.1.9839.2.1.3.14 | hhAlarmThrsh, gateway4, ht1-hours-h, cmp2_h_count_ca, hh-set, duration_def, hour, delay_alrm_temp, comp_min_on_time, set_gradino1, contaore_c1_c9, d6, rele_safety_cycle, lmonth, ore_comp1_c9, vis_repeater__7 | 0 | 0 | High Humidity Alarm Threshold |
| 1.3.6.1.4.1.9839.2.1.3.15 | lhAlarmThrsh, dns1-1, ht1-hours-l, en_fan_hc_f9, lh-set, delay_def_after_sturt_up, minute, remote_alarms_dsply_enable, rele_safety_cycle, offset_grad1, max_ore_comp_cb, n1, cc_alarm_delay, lyear | 0 | 0 | Low Humidity Alarm Threshold |
| 1.3.6.1.4.1.9839.2.1.3.16 | dehumSetp, dns1-2, current-second, en_filt_hc_fb, hset, dripping_iyme, ora_autocall, gestione_ventole, cc_alarm_delay, diff_gradino1, ore_pmp_vent_cc, set_comp1_cw, r1, comp_cc, hour, def_probe3__9 | 0 | 0 | Dehumidification Setpoint |
| 1.3.6.1.4.1.9839.2.1.3.17 | smDehumSetp, dns1-3, current-minute, en_cmps_hc_c8, hset-sm, duration_of_alarm, minuti_autocall, ventole_off_se_compr_off, max_pd_time, set_gradino2, modo_vent_f2, ist_comp1_cw, f1, defrost_type, minute, ore_comp2_ca | 0 | 0 | Setback Mode: Dehumidification Setpoint |
| 1.3.6.1.4.1.9839.2.1.3.19 | smHumidSetp, dns2-1, current-day, cool_mode_h5, hu-set-sm, config_dig_in1, ore_comp1, time_fermo_post_gocciol, comp_cc, diff_gradino2, max_volt_f4, rit_all_ht_in, ist_comp2_cw, tm_postdripp_fd, r2, alarm_delay_df_door, pyear, ore_pompa_cc | 0 | 0 | Setback Mode: Humidification Setpoint |
| 1.3.6.1.4.1.9839.2.1.3.20 | pwOnDelay, dns2-2, current-month, heat_mode_h6, restart-delay, config_dig_in2, ore_comp2, address_seriale, defrost_type, set_gradino3, t_spunto_v_fb, x_h_main_pump, rit_all_press, f2, dripping_interval, rit_c_f_cond_cd, set_r1 | 0 | 0 | Restart Delay |
| 1.3.6.1.4.1.9839.2.1.3.21 | regulDelay, dns2-3, current-year, en_humidif_h8, regul-delay, look_comp_ext, ore_comp3, en_dis_tasti_ir, dly_def_gas, offset_grad3, t_imp_triac_fc, x_l_main_pump, s1, setpoint_l1, n3, defrost_interval, oil_diff, modo_fan_f2, set_r2 | 0 | 0 | Regulation Start Transitory |
| 1.3.6.1.4.1.9839.2.1.3.22 | lowPdelay, dns2-4, firestat-sp, tempo_di_escursione_valvola_3, time-lowp, delay_activ_alr, codice_abilit_progr_telec_ir, defrost_delay, diff_gradino3, t_min_on_def_d5, x_h_comp1, s8, set_comp1_es, r3, defrost_max_time, min_volt_f3, en_ed_alarm_r3 | 0 | 0 | Low Pressure Delay |
| 1.3.6.1.4.1.9839.2.1.3.23 | thAlarmdelay, hum-hi-sp, prop_pi_re, alarm-delay, enabling_telecom, loc_on_off_ena, alarm_delay_df_door, set_gradino4, t_min_def_d6, x_l_comp1, n_comp_deum, s6, ist_comp1_es, stability__2, f3, fan_drip_interval, max_volt_f4 | 0 | 0 | Temp./Humid.Limits Alarm Delay |
| 1.3.6.1.4.1.9839.2.1.3.24 | regExcTime, ret-air-hi-sp, pi_time_rf, exc-time, sto_after_drip, lan_on_off_ena, dripping_interval, offset_grad4, t_max_def_d7, x_h_comp2, rit_stop_ventp, s9, set_comp2_es, min_setp_r1, n4, aux1_cfg, t_spunto_f_fb, en_t_maxmin_r5 | 0 | 0 | Anti-Hunting Constant |
| 1.3.6.1.4.1.9839.2.1.3.25 | stdbyTime, hum-lo-sp, conf_humid_h9, t-std-by, key_lock, config_out_digit_4, defrost_interval, diff_gradino4, rit_tra_2def_d8, x_l_comp2, rit_part_comp, s10, ist_comp2_es, max_setp_r2, r4, aux2_cfg, t_min_on_def_d5, reg_n_prb3_r6 | 0 | 0 | Stand-by Cycle Base Time |
| 1.3.6.1.4.1.9839.2.1.3.26 | ret-air-lo-sp, ip-Address1-Out, conf_b2_hc, fan_man_f0, config_out_digit_7, defrost_max_time, tast_telecom, wait_on_def_dc, x_h_comp3, rit_interbl, r19, rit_fra_ins, differ_rd, f4, light_sens_1, out_inv_fani, t_min_def_d6, tm_t_maxmin_rt | 0 | 0 | Lower limit alarm of return air temp |
| 1.3.6.1.4.1.9839.2.1.3.27 | lanUnit, ip-Address2-Out, hum-deadband, conf_b3_hd, lan-unit, oper_mode_h1, local_mode, fan_drip_interval, codice_telecom, wait_end_def_dd, x_l_comp3, min_sp_comp, r20, ngt_setp_var_r4, out, light_timer, inverter_compi1, t_max_def_d7 | 0 | 0 | Number of LAN Units |
| 1.3.6.1.4.1.9839.2.1.3.28 | smCycleTime, ip-Address3-Out, hum-setpoint, conf_anout2_hb, ciclo-sm, lan_len, aux1_cfg, rit_all_ag_a3, x_h_comp4, new_pass_ut, r21, rit_bassa_pres, thr_lt_al_al, mode, minmax_acq_time, board_type, rit_2def_1c_d8 | 0 | 0 | Sleep Mode Testing Cycle Time |
| 1.3.6.1.4.1.9839.2.1.3.29 | exv1steps, ip-Address4-Out, start-dly, id_on_off_he, delay_start_compressore, aux2_cfg, r_al_on_flux_p1, x_l_comp4, h3, rit_riaccen, thr_ht_al_ah, link1, haccp_ha_day, unit_status, rit_def_2c_d9, tm_delay_c0 | 0 | 0 | Circuit 1 EXV Valve Position |
| 1.3.6.1.4.1.9839.2.1.3.30 | exv2steps, starting-delay-Second-Pump, alm1-del, al_out_lgk_hf, time_min_tra_acc_compr, light_sens_1, r_al_rg_flux_p2, config_unit, new_pass_cos, h4, rit_tra_ins, id_al_delay_a7, link2, haccp_ha_hour, type_b1, rit_all_ag_a3, tm_btwn_comp_c1 | 0 | 0 | Circuit 2 EXV Valve Position |
| 1.3.6.1.4.1.9839.2.1.3.31 | alm2-del, starting-delay-btw-Pump-Compressor, conf_deshum_ha, time_min_compr_off, sgl_all_min_rel, rit_all_lp_p3, config_type, min_stes_comp, h5, n_res, conf_id_a4, outl1, haccp_ha_min, type_b2, rall_on_flux_p1, comp_off_tm_c2 | 0 | 0 | Optional Alarm 2 Delay |
| 1.3.6.1.4.1.9839.2.1.3.32 | alm3-del, overlap-time-Pumps, conf_id_al_pb, time_min_compr_on, minmax_acq_time, t_buzzer_p4, ph_circ_type, min_tra_comp, p2, n_comp, comp_delay_c0, outl2, haccp_hf_day, bios_release, rall_rg_flux_p2, comp_on_tm_c3 | 0 | 0 | Optional Alarm 3 Delay |
| 1.3.6.1.4.1.9839.2.1.3.33 | alarm1-txt, working-time-Pumps, un_rot_num_h2, sicurezza_rele, haccp_ha_day, riprist_all_p5, n_comps, min_acc_comp, s7, rit_hl, t_al_delay_ad, priority, haccp_hf_hour, bios_date, rit_all_bp_p3, relay_safety_c4 | 0 | 0 | Message on optional alarm screen, some also add function |
| 1.3.6.1.4.1.9839.2.1.3.34 | alarm2-txt, running-time-Chillers, un_rot_adr_h3, time_escl_alrm_dopo_ciclo_cont, haccp_ha_hour, day, selez_id1_p8, comps_x_unit, rit_resistenze, keycode_sv_h5, alcomm, haccp_hf_min, boot_release, buzzer_p4, cnt_cycl_dur_cc | 0 | 0 | Message on optional alarm screen, some also add function |
| 1.3.6.1.4.1.9839.2.1.3.35 | alarm3-txt, overlap-time-Chillers, rot_time_h4, delay_start_valve_comp, haccp_ha_min, month, selez_id2_p9, n_unloaders, tempo_max, h18, en_def_mf_h1, dk1, haccp_alarm_delay, boot_date, modello_h1, al_time_excl_c6 | 0 | 0 | Message on optional alarm screen, some also add function |
| 1.3.6.1.4.1.9839.2.1.3.36 | alarm4-txt, n-chillers-Max, presenza_sonda_1, durata_ciclo_continuo, haccp_hf_day, pyear, modello_mac_h1, cond_fans, min_apertura, c1, t_betw_2_on_c1, dk2, defrost_t1_dd, modo_pompa_h5, defrost_type_d0 | 0 | 0 | Message on optional alarm screen, some also add function |
| 1.3.6.1.4.1.9839.2.1.3.37 | comp-sel, n-chillers-ON, tipo_sonda_2, tipo_sbrinamento, haccp_hf_hour, lday, modo_pmp_vnt_h5, fan1_speed_reg, sgl_macchina, c2, min_off_time_c2, defrost_t1_hh, time_switch_on1, blocca_tasti_h9, tm_btwn_defs_di | 0 | 0 | Comps 0=none, 1=one, 2=one+UL, 3=two, 4=two+UL, 5=Four/two circuit |
| 1.3.6.1.4.1.9839.2.1.3.38 | dehum-mode, n-pumps-ON, presenza_sonda_3, defrost_cmd, haccp_hf_min, lmonth, blocca_tasti_h9, fan2_speed_reg, c3, set_parz1_cw, min_on_time_c3, defrost_t1_mm, time_switchoff1, def_end_time_dt | 0 | 0 | 0=none, 1= comp limited, 2=twocomp limited, 3= comp unlimited, 4=twocomp unlimited |
| 1.3.6.1.4.1.9839.2.1.3.39 | reheat-sel, time-Enable-Pumps-Chiller-Offline, filtro_digitale, threshold_val_comp_run_def, haccp_rit_alarm, lyear, seradd, freecool_valve, c4, ist_parz1_cw, t_safe_relay_c4, dk5, defrost_t2_dd, time_min_on, delay_def_dc | 0 | 0 | Number of heat stages |
| 1.3.6.1.4.1.9839.2.1.3.40 | hum-sel, time-Running-Pumps-Chiller-Offline, limitazione_ingresso, sbrin_se_ast_da_off_ad_on, defrost_t1_dd, hour, passw_telec_hb, c8, set_parz2_cw, cont_cycle_cc, dk6, defrost_t2_hh, time_min_off, time_wait_def_dd, def_max_time_dp | 0 | 0 | 0=none, 1=comp mod, 2=comp non, 3= comf mod, 4= conf non mod |
| 1.3.6.1.4.1.9839.2.1.3.41 | alm-contact-msg, integral-Time-3Way-Valve-Hydraulic-PID, keyb_lockup_hi, delay_sbrin_astoffon_o_digin, defrost_t1_hh, minute, valv_inv_ch_he, n_res, f1, ist_parz2_cw, offal_postcc_c6, defrost_t2_mm, time_betw_comp, valve_status, def_startup_d4 | 0 | 0 | Text displayed on all alarm screens |
| 1.3.6.1.4.1.9839.2.1.3.42 | powerup-sel, derivative-Time-3Way-Valve-Hydraulic-PID, param_set_hl, stop_vis_in_sbrin, defrost_t1_mm, lhour, numero_term_h8, tempo_integra, f2, def_type_d0, defrost_t3_dd, time_same_comp, def_del_su_d5 | 0 | 0 | 0= start wo/alarm, 1= start w/alarm, 2= requires reset of alarm |
| 1.3.6.1.4.1.9839.2.1.3.43 | buzzer-select, output-Address-3Way-Valve-Hydraulic, display_cfg_hn, skip_defrost_enable, defrost_t2_dd, lminute, high_temp_all_pc, f6, t_betw_def_dl, defrost_t3_hh, unload_delay, stop_vis_def_d6 | 0 | 0 | 0=None, 1=short beeps, 2=long beep, 3=Constant |
| 1.3.6.1.4.1.9839.2.1.3.44 | cw-disp, time-Speed-Up-FCM, buzzer_cfg_p4, time_escl_alrm_dopo_sbrin, defrost_t2_hh, delay_low_press, set_parz1_es, def_end_t_dt, defrost_t3_mm, time_switch_on2, drip_tm_def_dd | 0 | 0 | % of 10volts of analog output #1 |
| 1.3.6.1.4.1.9839.2.1.3.45 | wtrvlv-duty, time-Soft-Start-FCM, alm_reset_p5, priority_sbrin_su_protez_compr, defrost_t2_mm, n_devices1, ist_parz1_es, def_durat_dp, defrost_t4_dd, time_switchoff2, aloff_tm_def_d8 | 0 | 0 | Chilled Water Utilization Over Last Hour - This applies to Chilled water or Energy saver units. |
| 1.3.6.1.4.1.9839.2.1.3.46 | hum-hours-h, intervallo_tra_sbrin, defrost_t3_dd, n_devices2, f14, set_parz2_es, def_delay_d5, defrost_t4_hh, time_betw_fan, def_priority_d9 | 0 | 0 | Humidifier Runtime - high |
| 1.3.6.1.4.1.9839.2.1.3.47 | hum-hours-l, delay-Freecooling, intervallo_tra_pulizie, defrost_t3_hh, n_partial, f15, ist_parz2_es, postdef_dr_t_dd, defrost_t4_mm, rit_dif_olio | 0 | 0 | Humidifier Runtime - low |
| 1.3.6.1.4.1.9839.2.1.3.48 | blower-hours-h, integral-Time-Freeccoling-PID, user_pw_hh, max_durata_sbrin, defrost_t3_mm, r18, t_int, t_al_exc_def_d8, defrost_t5_dd, rit_all_liq | 0 | 0 | Blower Runtime - high |
| 1.3.6.1.4.1.9839.2.1.3.49 | blower-hours-l, derivative-Time-Freeccoling-PID, sw_release_hr, time_gocciol_dopo_sbrin, defrost_t4_dd, r10, diff_al_fan_a0, defrost_t5_hh, time_base_dc | 0 | 0 | Blower Runtime - low |
| 1.3.6.1.4.1.9839.2.1.3.50 | alm4-del, time-Min-On-Freecooling-Chiller-timing, fan_config_f1, intervallo_rilev_temp_maxmin, defrost_t4_hh, r11, sgl_ore_mac, defrost_t5_mm, machine_config | 0 | 0 | Optional Alarm 4 Delay |
| 1.3.6.1.4.1.9839.2.1.3.51 | assist-sel, time-Min-Off-Freecooling-Chiller-timing, min_volt_f2, stn, defrost_t4_mm, versione_sw_hg, f7, sgl_ore_comp1, defrost_t6_dd, swrel | 0 | 0 | 0= no comp assist, 1=one comp assist, 2= two comp assist, 3... 4... |