OID reference
1.3.6.1.4.1.9839.2.1.3.4
Compressor 2 Run Hours
Identification
{1 3 6 1 4 1 9839 2 1 3 4}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.9839.2.1.3.4.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 11 distinct definitions; some records may not include a definition.
config_type OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Type of unit configuration"
::= { integerObjects 4 }ore-compr2 OBJECT-TYPE
SYNTAX Integer32
UNITS "h"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Compressor 2 Working Houres"
::= { integerObjects 4 }showprobe_t OBJECT-TYPE
SYNTAX Integer32 (0..4)
UNITS "flag"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Terminal configuration"
DEFVAL { 4 }
::= { integerObjects 4 }compr2WorkH OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "h"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Compressor 2 Run Hours"
::= { integerObjects 4 }showprobe_t OBJECT-TYPE
SYNTAX Integer32 (0..4)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Terminal configuration"
DEFVAL { 4 }
::= { integerObjects 4 }a2 OBJECT-TYPE
SYNTAX Integer32 (0..5)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Type of digital input 2"
DEFVAL { 0 }
::= { integerObjects 4 }vis_ripetitore OBJECT-TYPE
SYNTAX Integer32 (0..5)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Remote Display Management"
DEFVAL { 0 }
::= { integerObjects 4 }tmin_off_out_c8 OBJECT-TYPE
SYNTAX Integer32 (0..15)
UNITS "min"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Minimum disenergization time-interval"
DEFVAL { 0 }
::= { integerObjects 4 }derivata OBJECT-TYPE
SYNTAX Integer32 (1..15)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Probe reading speed"
DEFVAL { 8 }
::= { integerObjects 4 }heaters-on OBJECT-TYPE
SYNTAX Integer32 (-32768..32767)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of heat stages running"
DEFVAL { 0 }
::= { integerObjects 4 }filtro_dig__b OBJECT-TYPE
SYNTAX Integer32 (1..15)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Digital filter"
DEFVAL { 4 }
::= { integerObjects 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
Type of unit configuration
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 3
Compressor 2 Working Houres
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 4
Terminal configuration
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 5
Type of digital input 2
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 6
Remote Display Management
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 7
Minimum disenergization time-interval
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 8
Probe reading speed
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 9
Number of heat stages running
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 10
Digital filter
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: config_type
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"config_type",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Type of unit configuration\"",
"::=",
"{",
"integerObjects",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Type of unit configuration"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-screw_compressor-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Status in source: current.
Names: ore-compr2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ore-compr2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"UNITS",
[
"literal",
"226822"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Compressor 2 Working Houres\"",
"::=",
"{",
"integerObjects",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
[
"UNITS",
"h"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Compressor 2 Working Houres"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: UNCDZ-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: showprobe_t
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"showprobe_t",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"4",
")",
"UNITS",
[
"literal",
"22666c616722"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Terminal configuration\"",
"DEFVAL",
"{",
"4",
"}",
"::=",
"{",
"integerObjects",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
4
]
]
]
],
[
"UNITS",
"flag"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Terminal configuration"
],
null,
null,
null,
[
"DEFVAL",
4
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mastercellasplit-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: showprobe_t
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"showprobe_t",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"4",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Terminal configuration\"",
"DEFVAL",
"{",
"4",
"}",
"::=",
"{",
"integerObjects",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
4
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Terminal configuration"
],
null,
null,
null,
[
"DEFVAL",
4
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-powersplit-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: compr2WorkH
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"compr2WorkH",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"226822"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Compressor 2 Run Hours\"",
"::=",
"{",
"integerObjects",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"h"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Compressor 2 Run Hours"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: CAREL-ug40cdz-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'RFC1213-MIB': ['DisplayString'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Same file in Observium Community.
Status in source: current.
Names: a2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"a2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"5",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Type of digital input 2\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"integerObjects",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
5
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Type of digital input 2"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mio-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: vis_ripetitore
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"vis_ripetitore",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"5",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Remote Display Management\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"integerObjects",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
5
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Remote Display Management"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mastercase-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: tmin_off_out_c8
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tmin_off_out_c8",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"15",
")",
"UNITS",
[
"literal",
"226d696e22"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Minimum disenergization time-interval\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"integerObjects",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
15
]
]
]
],
[
"UNITS",
"min"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Minimum disenergization time-interval"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-ir32un_t-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Vendor MIB copy from the Observium Community archive.
Module: CAREL-ir32un_ap-MIB
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: derivata
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"derivata",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"1",
".",
".",
"15",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Probe reading speed\"",
"DEFVAL",
"{",
"8",
"}",
"::=",
"{",
"integerObjects",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
1,
15
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Probe reading speed"
],
null,
null,
null,
[
"DEFVAL",
8
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mcella-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Vendor MIB copy from the Observium Community archive.
Module: CAREL-ir_32-MIB
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: heaters-on
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"heaters-on",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32768",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Number of heat stages running\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"integerObjects",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32768,
32767
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Number of heat stages running"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the LibreNMS archive.
Module: DataAire-dap4-al-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Vendor MIB copy from the Observium Community archive.
Module: DataAire-dap4-al-MIB
Same published definition (formatting differs; exact original is in the source file)
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: filtro_dig__b
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"filtro_dig__b",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"1",
".",
".",
"15",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Digital filter\"",
"DEFVAL",
"{",
"4",
"}",
"::=",
"{",
"integerObjects",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
1,
15
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Digital filter"
],
null,
null,
null,
[
"DEFVAL",
4
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uchiller-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9839.2.1.3.1 | filterWorkH, disch-air-lo-sp, ore-filtro, modello, id_firm_vers, probe_delay, hightempdelay, modo_funz_c0, velocita_vent, unit_status, mod, probe_stability, tipo_sonda__3 | 0 | 0 | Air Filter Working Houres |
| 1.3.6.1.4.1.9839.2.1.3.2 | unitWorkH, humidity-dis, ore-unit, type_defrost, stabilita_misura, virt_probe, defrostdelay, rit_2ins_c6, net_address, sonde, min_in_corr__4 | 0 | 0 | Unit Working Houres |
| 1.3.6.1.4.1.9839.2.1.3.3 | compr1WorkH, stages-on, ore-compr1, filter_digital, sonda_virtuale, defrostprobepresence, ampsignal, tmin_2out_c7, cound_fans_mng, a1, showprobe, max_in_corr__5 | 0 | 0 | Compressor 1 Run Hours |
| 1.3.6.1.4.1.9839.2.1.3.5 | compr3WorkH, minmax-24hr-hum-maximum, ore-compr3, virtual_probe, esiste_sonda, dig_in_term_cfg_1, tmin_on_c9, number_comps, defrostprobepresence, limitaz_in__c | 0 | 0 | Compressor 3 Run Hours |
| 1.3.6.1.4.1.9839.2.1.3.6 | compr4WorkH, ip-Address1, minmax-24hr-hum-minumum, ore-compr4, delay_from_startup, vis_terminale, dig_in_term_cfg_2, sicur_sonde, filtro_digitale, cond_fans, dig_in_cfg_1, tmin_on_comp_c1 | 0 | 0 | Compressor 4 Run Hours |
| 1.3.6.1.4.1.9839.2.1.3.7 | heat1WorkH, ip-Address2, comp-duty, ore-heat1, interval_between_2_start-up, config_in_digit_1, dig_in_cfg_1, rotazione, a5, dig_in_cfg_2 | 0 | 0 | Heater 1 Run Hours |
| 1.3.6.1.4.1.9839.2.1.3.8 | heat2WorkH, ip-Address3, heat-duty, ore-heat2, time_min_off, config_in_digit_2, dig_in_cfg_2, velocita_sonda, tmin_on_comp_c1, modalita_ventole, a6, alarm_input_delay, time_2_acc_c3 | 0 | 0 | Heater 2 Run Hours |
| 1.3.6.1.4.1.9839.2.1.3.9 | humiWorkH, ip-Address4, hum-duty, ore-umid, time_min_on, config_in_digit_3, alarm_input_delay, presenza_sonda, tmin_sp_comp_c2, d1, alarm_delay, msrmnt_stab__2 | 0 | 0 | Humidifier Run Hours |
| 1.3.6.1.4.1.9839.2.1.3.10 | c1-hours-h, netMask, safety_relay, n_comp, config_in_digit_4, alarm_delay, tempo_allarme, time_2_acc_c3, cu_remote_ctrl, ore_comp1, in_rampa_p, d2, comp_startup_delay, rit_off_2c_c5, prb_read_spd__3 | 0 | 0 | Compressor 1 Runtime -This point applies to DX unit with one compressor -high |
| 1.3.6.1.4.1.9839.2.1.3.11 | c1-hours-l, gateway1, fan_h_count_fa, duration_cc, n_vent, config_in_digit_5, comp_startup_delay, gestione_id1, rit_on_comp_c6, recover_mode, ore_comp2, fin_rampa_p, comp_s2s_delay, lhour, prb_virtual__4 | 0 | 0 | Compressor 1 Runtime -This point applies to DX unit with one compressor -low |
| 1.3.6.1.4.1.9839.2.1.3.12 | dehumPband, gateway2, c2-hours-h, filt_h_count_fc, hdiff, no_alarm_after_cc, lhour, time_delay_rilevaz_ingresso, comp_s2s_delay, gestione_id2, rit_c_on_pmp_c7, unit_status, in_rampa_n, comp_min_off_time, lminute, unit_msrmnt__5 | 0 | 0 | Dehumidification Prop.Band |
| 1.3.6.1.4.1.9839.2.1.3.13 | humidPband, gateway3, c2-hours-l, cmp1_h_count_c9, hu-diff, interval_between_defrost, lminute, config_virt_din, comp_min_off_time, sicur_all_id, off_p_off_v_c8, cond_fans_mng, fin_rampa_n, d5, comp_min_on_time, lday, off_p_off_c_c8, en_dec_point__6 | 0 | 0 | Humidification Prop.Band |
| 1.3.6.1.4.1.9839.2.1.3.14 | hhAlarmThrsh, gateway4, ht1-hours-h, cmp2_h_count_ca, hh-set, duration_def, hour, delay_alrm_temp, comp_min_on_time, set_gradino1, contaore_c1_c9, d6, rele_safety_cycle, lmonth, ore_comp1_c9, vis_repeater__7 | 0 | 0 | High Humidity Alarm Threshold |
| 1.3.6.1.4.1.9839.2.1.3.15 | lhAlarmThrsh, dns1-1, ht1-hours-l, en_fan_hc_f9, lh-set, delay_def_after_sturt_up, minute, remote_alarms_dsply_enable, rele_safety_cycle, offset_grad1, max_ore_comp_cb, n1, cc_alarm_delay, lyear | 0 | 0 | Low Humidity Alarm Threshold |
| 1.3.6.1.4.1.9839.2.1.3.16 | dehumSetp, dns1-2, current-second, en_filt_hc_fb, hset, dripping_iyme, ora_autocall, gestione_ventole, cc_alarm_delay, diff_gradino1, ore_pmp_vent_cc, set_comp1_cw, r1, comp_cc, hour, def_probe3__9 | 0 | 0 | Dehumidification Setpoint |
| 1.3.6.1.4.1.9839.2.1.3.17 | smDehumSetp, dns1-3, current-minute, en_cmps_hc_c8, hset-sm, duration_of_alarm, minuti_autocall, ventole_off_se_compr_off, max_pd_time, set_gradino2, modo_vent_f2, ist_comp1_cw, f1, defrost_type, minute, ore_comp2_ca | 0 | 0 | Setback Mode: Dehumidification Setpoint |
| 1.3.6.1.4.1.9839.2.1.3.18 | humidSetp, dns1-4, current-hour, unit_model_h1, hu-set, rit_all_temp, sg_ore_comp, ventole_stop_in_sbrin, dly_valve_comp, offset_grad2, min_volt_f3, set_comp2_cw, t_on_fan_f1, n2, defrost_delay, month, max_ore_comp_cb, exist_probe__a | 0 | 0 | Humidification Setpoint |
| 1.3.6.1.4.1.9839.2.1.3.19 | smHumidSetp, dns2-1, current-day, cool_mode_h5, hu-set-sm, config_dig_in1, ore_comp1, time_fermo_post_gocciol, comp_cc, diff_gradino2, max_volt_f4, rit_all_ht_in, ist_comp2_cw, tm_postdripp_fd, r2, alarm_delay_df_door, pyear, ore_pompa_cc | 0 | 0 | Setback Mode: Humidification Setpoint |
| 1.3.6.1.4.1.9839.2.1.3.20 | pwOnDelay, dns2-2, current-month, heat_mode_h6, restart-delay, config_dig_in2, ore_comp2, address_seriale, defrost_type, set_gradino3, t_spunto_v_fb, x_h_main_pump, rit_all_press, f2, dripping_interval, rit_c_f_cond_cd, set_r1 | 0 | 0 | Restart Delay |
| 1.3.6.1.4.1.9839.2.1.3.21 | regulDelay, dns2-3, current-year, en_humidif_h8, regul-delay, look_comp_ext, ore_comp3, en_dis_tasti_ir, dly_def_gas, offset_grad3, t_imp_triac_fc, x_l_main_pump, s1, setpoint_l1, n3, defrost_interval, oil_diff, modo_fan_f2, set_r2 | 0 | 0 | Regulation Start Transitory |
| 1.3.6.1.4.1.9839.2.1.3.22 | lowPdelay, dns2-4, firestat-sp, tempo_di_escursione_valvola_3, time-lowp, delay_activ_alr, codice_abilit_progr_telec_ir, defrost_delay, diff_gradino3, t_min_on_def_d5, x_h_comp1, s8, set_comp1_es, r3, defrost_max_time, min_volt_f3, en_ed_alarm_r3 | 0 | 0 | Low Pressure Delay |
| 1.3.6.1.4.1.9839.2.1.3.23 | thAlarmdelay, hum-hi-sp, prop_pi_re, alarm-delay, enabling_telecom, loc_on_off_ena, alarm_delay_df_door, set_gradino4, t_min_def_d6, x_l_comp1, n_comp_deum, s6, ist_comp1_es, stability__2, f3, fan_drip_interval, max_volt_f4 | 0 | 0 | Temp./Humid.Limits Alarm Delay |
| 1.3.6.1.4.1.9839.2.1.3.24 | regExcTime, ret-air-hi-sp, pi_time_rf, exc-time, sto_after_drip, lan_on_off_ena, dripping_interval, offset_grad4, t_max_def_d7, x_h_comp2, rit_stop_ventp, s9, set_comp2_es, min_setp_r1, n4, aux1_cfg, t_spunto_f_fb, en_t_maxmin_r5 | 0 | 0 | Anti-Hunting Constant |
| 1.3.6.1.4.1.9839.2.1.3.25 | stdbyTime, hum-lo-sp, conf_humid_h9, t-std-by, key_lock, config_out_digit_4, defrost_interval, diff_gradino4, rit_tra_2def_d8, x_l_comp2, rit_part_comp, s10, ist_comp2_es, max_setp_r2, r4, aux2_cfg, t_min_on_def_d5, reg_n_prb3_r6 | 0 | 0 | Stand-by Cycle Base Time |
| 1.3.6.1.4.1.9839.2.1.3.26 | ret-air-lo-sp, ip-Address1-Out, conf_b2_hc, fan_man_f0, config_out_digit_7, defrost_max_time, tast_telecom, wait_on_def_dc, x_h_comp3, rit_interbl, r19, rit_fra_ins, differ_rd, f4, light_sens_1, out_inv_fani, t_min_def_d6, tm_t_maxmin_rt | 0 | 0 | Lower limit alarm of return air temp |
| 1.3.6.1.4.1.9839.2.1.3.27 | lanUnit, ip-Address2-Out, hum-deadband, conf_b3_hd, lan-unit, oper_mode_h1, local_mode, fan_drip_interval, codice_telecom, wait_end_def_dd, x_l_comp3, min_sp_comp, r20, ngt_setp_var_r4, out, light_timer, inverter_compi1, t_max_def_d7 | 0 | 0 | Number of LAN Units |
| 1.3.6.1.4.1.9839.2.1.3.28 | smCycleTime, ip-Address3-Out, hum-setpoint, conf_anout2_hb, ciclo-sm, lan_len, aux1_cfg, rit_all_ag_a3, x_h_comp4, new_pass_ut, r21, rit_bassa_pres, thr_lt_al_al, mode, minmax_acq_time, board_type, rit_2def_1c_d8 | 0 | 0 | Sleep Mode Testing Cycle Time |
| 1.3.6.1.4.1.9839.2.1.3.29 | exv1steps, ip-Address4-Out, start-dly, id_on_off_he, delay_start_compressore, aux2_cfg, r_al_on_flux_p1, x_l_comp4, h3, rit_riaccen, thr_ht_al_ah, link1, haccp_ha_day, unit_status, rit_def_2c_d9, tm_delay_c0 | 0 | 0 | Circuit 1 EXV Valve Position |
| 1.3.6.1.4.1.9839.2.1.3.30 | exv2steps, starting-delay-Second-Pump, alm1-del, al_out_lgk_hf, time_min_tra_acc_compr, light_sens_1, r_al_rg_flux_p2, config_unit, new_pass_cos, h4, rit_tra_ins, id_al_delay_a7, link2, haccp_ha_hour, type_b1, rit_all_ag_a3, tm_btwn_comp_c1 | 0 | 0 | Circuit 2 EXV Valve Position |
| 1.3.6.1.4.1.9839.2.1.3.31 | alm2-del, starting-delay-btw-Pump-Compressor, conf_deshum_ha, time_min_compr_off, sgl_all_min_rel, rit_all_lp_p3, config_type, min_stes_comp, h5, n_res, conf_id_a4, outl1, haccp_ha_min, type_b2, rall_on_flux_p1, comp_off_tm_c2 | 0 | 0 | Optional Alarm 2 Delay |
| 1.3.6.1.4.1.9839.2.1.3.32 | alm3-del, overlap-time-Pumps, conf_id_al_pb, time_min_compr_on, minmax_acq_time, t_buzzer_p4, ph_circ_type, min_tra_comp, p2, n_comp, comp_delay_c0, outl2, haccp_hf_day, bios_release, rall_rg_flux_p2, comp_on_tm_c3 | 0 | 0 | Optional Alarm 3 Delay |
| 1.3.6.1.4.1.9839.2.1.3.33 | alarm1-txt, working-time-Pumps, un_rot_num_h2, sicurezza_rele, haccp_ha_day, riprist_all_p5, n_comps, min_acc_comp, s7, rit_hl, t_al_delay_ad, priority, haccp_hf_hour, bios_date, rit_all_bp_p3, relay_safety_c4 | 0 | 0 | Message on optional alarm screen, some also add function |
| 1.3.6.1.4.1.9839.2.1.3.34 | alarm2-txt, running-time-Chillers, un_rot_adr_h3, time_escl_alrm_dopo_ciclo_cont, haccp_ha_hour, day, selez_id1_p8, comps_x_unit, rit_resistenze, keycode_sv_h5, alcomm, haccp_hf_min, boot_release, buzzer_p4, cnt_cycl_dur_cc | 0 | 0 | Message on optional alarm screen, some also add function |
| 1.3.6.1.4.1.9839.2.1.3.35 | alarm3-txt, overlap-time-Chillers, rot_time_h4, delay_start_valve_comp, haccp_ha_min, month, selez_id2_p9, n_unloaders, tempo_max, h18, en_def_mf_h1, dk1, haccp_alarm_delay, boot_date, modello_h1, al_time_excl_c6 | 0 | 0 | Message on optional alarm screen, some also add function |
| 1.3.6.1.4.1.9839.2.1.3.36 | alarm4-txt, n-chillers-Max, presenza_sonda_1, durata_ciclo_continuo, haccp_hf_day, pyear, modello_mac_h1, cond_fans, min_apertura, c1, t_betw_2_on_c1, dk2, defrost_t1_dd, modo_pompa_h5, defrost_type_d0 | 0 | 0 | Message on optional alarm screen, some also add function |
| 1.3.6.1.4.1.9839.2.1.3.37 | comp-sel, n-chillers-ON, tipo_sonda_2, tipo_sbrinamento, haccp_hf_hour, lday, modo_pmp_vnt_h5, fan1_speed_reg, sgl_macchina, c2, min_off_time_c2, defrost_t1_hh, time_switch_on1, blocca_tasti_h9, tm_btwn_defs_di | 0 | 0 | Comps 0=none, 1=one, 2=one+UL, 3=two, 4=two+UL, 5=Four/two circuit |
| 1.3.6.1.4.1.9839.2.1.3.38 | dehum-mode, n-pumps-ON, presenza_sonda_3, defrost_cmd, haccp_hf_min, lmonth, blocca_tasti_h9, fan2_speed_reg, c3, set_parz1_cw, min_on_time_c3, defrost_t1_mm, time_switchoff1, def_end_time_dt | 0 | 0 | 0=none, 1= comp limited, 2=twocomp limited, 3= comp unlimited, 4=twocomp unlimited |
| 1.3.6.1.4.1.9839.2.1.3.39 | reheat-sel, time-Enable-Pumps-Chiller-Offline, filtro_digitale, threshold_val_comp_run_def, haccp_rit_alarm, lyear, seradd, freecool_valve, c4, ist_parz1_cw, t_safe_relay_c4, dk5, defrost_t2_dd, time_min_on, delay_def_dc | 0 | 0 | Number of heat stages |
| 1.3.6.1.4.1.9839.2.1.3.40 | hum-sel, time-Running-Pumps-Chiller-Offline, limitazione_ingresso, sbrin_se_ast_da_off_ad_on, defrost_t1_dd, hour, passw_telec_hb, c8, set_parz2_cw, cont_cycle_cc, dk6, defrost_t2_hh, time_min_off, time_wait_def_dd, def_max_time_dp | 0 | 0 | 0=none, 1=comp mod, 2=comp non, 3= comf mod, 4= conf non mod |
| 1.3.6.1.4.1.9839.2.1.3.41 | alm-contact-msg, integral-Time-3Way-Valve-Hydraulic-PID, keyb_lockup_hi, delay_sbrin_astoffon_o_digin, defrost_t1_hh, minute, valv_inv_ch_he, n_res, f1, ist_parz2_cw, offal_postcc_c6, defrost_t2_mm, time_betw_comp, valve_status, def_startup_d4 | 0 | 0 | Text displayed on all alarm screens |
| 1.3.6.1.4.1.9839.2.1.3.42 | powerup-sel, derivative-Time-3Way-Valve-Hydraulic-PID, param_set_hl, stop_vis_in_sbrin, defrost_t1_mm, lhour, numero_term_h8, tempo_integra, f2, def_type_d0, defrost_t3_dd, time_same_comp, def_del_su_d5 | 0 | 0 | 0= start wo/alarm, 1= start w/alarm, 2= requires reset of alarm |
| 1.3.6.1.4.1.9839.2.1.3.43 | buzzer-select, output-Address-3Way-Valve-Hydraulic, display_cfg_hn, skip_defrost_enable, defrost_t2_dd, lminute, high_temp_all_pc, f6, t_betw_def_dl, defrost_t3_hh, unload_delay, stop_vis_def_d6 | 0 | 0 | 0=None, 1=short beeps, 2=long beep, 3=Constant |
| 1.3.6.1.4.1.9839.2.1.3.44 | cw-disp, time-Speed-Up-FCM, buzzer_cfg_p4, time_escl_alrm_dopo_sbrin, defrost_t2_hh, delay_low_press, set_parz1_es, def_end_t_dt, defrost_t3_mm, time_switch_on2, drip_tm_def_dd | 0 | 0 | % of 10volts of analog output #1 |
| 1.3.6.1.4.1.9839.2.1.3.45 | wtrvlv-duty, time-Soft-Start-FCM, alm_reset_p5, priority_sbrin_su_protez_compr, defrost_t2_mm, n_devices1, ist_parz1_es, def_durat_dp, defrost_t4_dd, time_switchoff2, aloff_tm_def_d8 | 0 | 0 | Chilled Water Utilization Over Last Hour - This applies to Chilled water or Energy saver units. |
| 1.3.6.1.4.1.9839.2.1.3.46 | hum-hours-h, intervallo_tra_sbrin, defrost_t3_dd, n_devices2, f14, set_parz2_es, def_delay_d5, defrost_t4_hh, time_betw_fan, def_priority_d9 | 0 | 0 | Humidifier Runtime - high |
| 1.3.6.1.4.1.9839.2.1.3.47 | hum-hours-l, delay-Freecooling, intervallo_tra_pulizie, defrost_t3_hh, n_partial, f15, ist_parz2_es, postdef_dr_t_dd, defrost_t4_mm, rit_dif_olio | 0 | 0 | Humidifier Runtime - low |
| 1.3.6.1.4.1.9839.2.1.3.48 | blower-hours-h, integral-Time-Freeccoling-PID, user_pw_hh, max_durata_sbrin, defrost_t3_mm, r18, t_int, t_al_exc_def_d8, defrost_t5_dd, rit_all_liq | 0 | 0 | Blower Runtime - high |
| 1.3.6.1.4.1.9839.2.1.3.49 | blower-hours-l, derivative-Time-Freeccoling-PID, sw_release_hr, time_gocciol_dopo_sbrin, defrost_t4_dd, r10, diff_al_fan_a0, defrost_t5_hh, time_base_dc | 0 | 0 | Blower Runtime - low |
| 1.3.6.1.4.1.9839.2.1.3.50 | alm4-del, time-Min-On-Freecooling-Chiller-timing, fan_config_f1, intervallo_rilev_temp_maxmin, defrost_t4_hh, r11, sgl_ore_mac, defrost_t5_mm, machine_config | 0 | 0 | Optional Alarm 4 Delay |
| 1.3.6.1.4.1.9839.2.1.3.51 | assist-sel, time-Min-Off-Freecooling-Chiller-timing, min_volt_f2, stn, defrost_t4_mm, versione_sw_hg, f7, sgl_ore_comp1, defrost_t6_dd, swrel | 0 | 0 | 0= no comp assist, 1=one comp assist, 2= two comp assist, 3... 4... |