OID reference
1.3.6.1.4.1.9839.2.1.3.48
Blower Runtime - high
Identification
{1 3 6 1 4 1 9839 2 1 3 48}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.9839.2.1.3.48.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 10 distinct definitions; some records may not include a definition.
rit_all_liq OBJECT-TYPE
SYNTAX Integer32 (0..360)
UNITS "sec"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delay in liquid level alarm"
DEFVAL { 10 }
::= { integerObjects 48 }t_int OBJECT-TYPE
SYNTAX Integer32 (0..9999)
UNITS "sec"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Integration time"
DEFVAL { 600 }
::= { integerObjects 48 }max_durata_sbrin OBJECT-TYPE
SYNTAX Integer32 (1..180)
UNITS "min"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Maximum defrost time"
DEFVAL { 30 }
::= { integerObjects 48 }defrost_t5_dd OBJECT-TYPE
SYNTAX Integer32 (0..10)
UNITS "gg"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Defrost event 5 day"
::= { integerObjects 48 }r18 OBJECT-TYPE
SYNTAX Integer32 (0..2)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Compressor selection rotation enable."
DEFVAL { 1 }
::= { integerObjects 48 }user_pw_hh OBJECT-TYPE
SYNTAX Integer32 (0..200)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "USER password"
DEFVAL { 22 }
::= { integerObjects 48 }blower-hours-h OBJECT-TYPE
SYNTAX Integer32 (-32768..32767)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Blower Runtime - high"
DEFVAL { 0 }
::= { integerObjects 48 }defrost_t3_mm OBJECT-TYPE
SYNTAX Integer32 (0..59)
UNITS "min"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Defrost event 3 min"
::= { integerObjects 48 }t_al_exc_def_d8 OBJECT-TYPE
SYNTAX Integer32 (0..15)
UNITS "Hours"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Alarm bypass time after defrosting"
DEFVAL { 1 }
::= { integerObjects 48 }integral-Time-Freeccoling-PID OBJECT-TYPE
SYNTAX Integer32 (0..999)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Integral Time Freeccoling (PID)"
::= { integerObjects 48 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
Delay in liquid level alarm
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 3
Integration time
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 4
Maximum defrost time
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 5
Defrost event 5 day
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 6
Compressor selection rotation enable.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 7
USER password
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 8
Defrost event 3 min
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 9
Alarm bypass time after defrosting
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 10
Integral Time Freeccoling (PID)
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rit_all_liq
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rit_all_liq",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"360",
")",
"UNITS",
[
"literal",
"2273656322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Delay in liquid level alarm\"",
"DEFVAL",
"{",
"10",
"}",
"::=",
"{",
"integerObjects",
"48",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
360
]
]
]
],
[
"UNITS",
"sec"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Delay in liquid level alarm"
],
null,
null,
null,
[
"DEFVAL",
10
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-fcp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Status in source: current.
Names: t_int
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"t_int",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"9999",
")",
"UNITS",
[
"literal",
"2273656322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Integration time\"",
"DEFVAL",
"{",
"600",
"}",
"::=",
"{",
"integerObjects",
"48",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
9999
]
]
]
],
[
"UNITS",
"sec"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Integration time"
],
null,
null,
null,
[
"DEFVAL",
600
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-cdz_pco-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: max_durata_sbrin
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"max_durata_sbrin",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"1",
".",
".",
"180",
")",
"UNITS",
[
"literal",
"226d696e22"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Maximum defrost time\"",
"DEFVAL",
"{",
"30",
"}",
"::=",
"{",
"integerObjects",
"48",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
1,
180
]
]
]
],
[
"UNITS",
"min"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Maximum defrost time"
],
null,
null,
null,
[
"DEFVAL",
30
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mastercase-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: defrost_t5_dd
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"defrost_t5_dd",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"10",
")",
"UNITS",
[
"literal",
"22676722"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Defrost event 5 day\"",
"::=",
"{",
"integerObjects",
"48",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
10
]
]
]
],
[
"UNITS",
"gg"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Defrost event 5 day"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-powersplit-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: r18
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"r18",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"2",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Compressor selection rotation enable.\"",
"DEFVAL",
"{",
"1",
"}",
"::=",
"{",
"integerObjects",
"48",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
2
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Compressor selection rotation enable."
],
null,
null,
null,
[
"DEFVAL",
1
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-aria-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: user_pw_hh
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"user_pw_hh",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"200",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"USER password\"",
"DEFVAL",
"{",
"22",
"}",
"::=",
"{",
"integerObjects",
"48",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
200
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"USER password"
],
null,
null,
null,
[
"DEFVAL",
22
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uac-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: blower-hours-h
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"blower-hours-h",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32768",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Blower Runtime - high\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"integerObjects",
"48",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32768,
32767
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Blower Runtime - high"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the LibreNMS archive.
Module: DataAire-dap4-al-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: DataAire-dap4-al-MIB
Same published definition (formatting differs; exact original is in the source file)
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: defrost_t3_mm
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"defrost_t3_mm",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"59",
")",
"UNITS",
[
"literal",
"226d696e22"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Defrost event 3 min\"",
"::=",
"{",
"integerObjects",
"48",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
59
]
]
]
],
[
"UNITS",
"min"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Defrost event 3 min"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mastercellasplit-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: t_al_exc_def_d8
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"t_al_exc_def_d8",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"15",
")",
"UNITS",
[
"literal",
"22486f75727322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Alarm bypass time after defrosting\"",
"DEFVAL",
"{",
"1",
"}",
"::=",
"{",
"integerObjects",
"48",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
15
]
]
]
],
[
"UNITS",
"Hours"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Alarm bypass time after defrosting"
],
null,
null,
null,
[
"DEFVAL",
1
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-plugin-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: integral-Time-Freeccoling-PID
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"integral-Time-Freeccoling-PID",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"999",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Integral Time Freeccoling (PID)\"",
"::=",
"{",
"integerObjects",
"48",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
999
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Integral Time Freeccoling (PID)"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: KELVIN-pCOWeb-Chiller-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Same file in Observium Community.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9839.2.1.3.1 | filterWorkH, disch-air-lo-sp, ore-filtro, modello, id_firm_vers, probe_delay, hightempdelay, modo_funz_c0, velocita_vent, unit_status, mod, probe_stability, tipo_sonda__3 | 0 | 0 | Air Filter Working Houres |
| 1.3.6.1.4.1.9839.2.1.3.2 | unitWorkH, humidity-dis, ore-unit, type_defrost, stabilita_misura, virt_probe, defrostdelay, rit_2ins_c6, net_address, sonde, min_in_corr__4 | 0 | 0 | Unit Working Houres |
| 1.3.6.1.4.1.9839.2.1.3.3 | compr1WorkH, stages-on, ore-compr1, filter_digital, sonda_virtuale, defrostprobepresence, ampsignal, tmin_2out_c7, cound_fans_mng, a1, showprobe, max_in_corr__5 | 0 | 0 | Compressor 1 Run Hours |
| 1.3.6.1.4.1.9839.2.1.3.4 | compr2WorkH, heaters-on, ore-compr2, derivata, vis_ripetitore, showprobe_t, tmin_off_out_c8, config_type, a2, filtro_dig__b | 0 | 0 | Compressor 2 Run Hours |
| 1.3.6.1.4.1.9839.2.1.3.5 | compr3WorkH, minmax-24hr-hum-maximum, ore-compr3, virtual_probe, esiste_sonda, dig_in_term_cfg_1, tmin_on_c9, number_comps, defrostprobepresence, limitaz_in__c | 0 | 0 | Compressor 3 Run Hours |
| 1.3.6.1.4.1.9839.2.1.3.6 | compr4WorkH, ip-Address1, minmax-24hr-hum-minumum, ore-compr4, delay_from_startup, vis_terminale, dig_in_term_cfg_2, sicur_sonde, filtro_digitale, cond_fans, dig_in_cfg_1, tmin_on_comp_c1 | 0 | 0 | Compressor 4 Run Hours |
| 1.3.6.1.4.1.9839.2.1.3.7 | heat1WorkH, ip-Address2, comp-duty, ore-heat1, interval_between_2_start-up, config_in_digit_1, dig_in_cfg_1, rotazione, a5, dig_in_cfg_2 | 0 | 0 | Heater 1 Run Hours |
| 1.3.6.1.4.1.9839.2.1.3.8 | heat2WorkH, ip-Address3, heat-duty, ore-heat2, time_min_off, config_in_digit_2, dig_in_cfg_2, velocita_sonda, tmin_on_comp_c1, modalita_ventole, a6, alarm_input_delay, time_2_acc_c3 | 0 | 0 | Heater 2 Run Hours |
| 1.3.6.1.4.1.9839.2.1.3.9 | humiWorkH, ip-Address4, hum-duty, ore-umid, time_min_on, config_in_digit_3, alarm_input_delay, presenza_sonda, tmin_sp_comp_c2, d1, alarm_delay, msrmnt_stab__2 | 0 | 0 | Humidifier Run Hours |
| 1.3.6.1.4.1.9839.2.1.3.10 | c1-hours-h, netMask, safety_relay, n_comp, config_in_digit_4, alarm_delay, tempo_allarme, time_2_acc_c3, cu_remote_ctrl, ore_comp1, in_rampa_p, d2, comp_startup_delay, rit_off_2c_c5, prb_read_spd__3 | 0 | 0 | Compressor 1 Runtime -This point applies to DX unit with one compressor -high |
| 1.3.6.1.4.1.9839.2.1.3.11 | c1-hours-l, gateway1, fan_h_count_fa, duration_cc, n_vent, config_in_digit_5, comp_startup_delay, gestione_id1, rit_on_comp_c6, recover_mode, ore_comp2, fin_rampa_p, comp_s2s_delay, lhour, prb_virtual__4 | 0 | 0 | Compressor 1 Runtime -This point applies to DX unit with one compressor -low |
| 1.3.6.1.4.1.9839.2.1.3.12 | dehumPband, gateway2, c2-hours-h, filt_h_count_fc, hdiff, no_alarm_after_cc, lhour, time_delay_rilevaz_ingresso, comp_s2s_delay, gestione_id2, rit_c_on_pmp_c7, unit_status, in_rampa_n, comp_min_off_time, lminute, unit_msrmnt__5 | 0 | 0 | Dehumidification Prop.Band |
| 1.3.6.1.4.1.9839.2.1.3.13 | humidPband, gateway3, c2-hours-l, cmp1_h_count_c9, hu-diff, interval_between_defrost, lminute, config_virt_din, comp_min_off_time, sicur_all_id, off_p_off_v_c8, cond_fans_mng, fin_rampa_n, d5, comp_min_on_time, lday, off_p_off_c_c8, en_dec_point__6 | 0 | 0 | Humidification Prop.Band |
| 1.3.6.1.4.1.9839.2.1.3.14 | hhAlarmThrsh, gateway4, ht1-hours-h, cmp2_h_count_ca, hh-set, duration_def, hour, delay_alrm_temp, comp_min_on_time, set_gradino1, contaore_c1_c9, d6, rele_safety_cycle, lmonth, ore_comp1_c9, vis_repeater__7 | 0 | 0 | High Humidity Alarm Threshold |
| 1.3.6.1.4.1.9839.2.1.3.15 | lhAlarmThrsh, dns1-1, ht1-hours-l, en_fan_hc_f9, lh-set, delay_def_after_sturt_up, minute, remote_alarms_dsply_enable, rele_safety_cycle, offset_grad1, max_ore_comp_cb, n1, cc_alarm_delay, lyear | 0 | 0 | Low Humidity Alarm Threshold |
| 1.3.6.1.4.1.9839.2.1.3.16 | dehumSetp, dns1-2, current-second, en_filt_hc_fb, hset, dripping_iyme, ora_autocall, gestione_ventole, cc_alarm_delay, diff_gradino1, ore_pmp_vent_cc, set_comp1_cw, r1, comp_cc, hour, def_probe3__9 | 0 | 0 | Dehumidification Setpoint |
| 1.3.6.1.4.1.9839.2.1.3.17 | smDehumSetp, dns1-3, current-minute, en_cmps_hc_c8, hset-sm, duration_of_alarm, minuti_autocall, ventole_off_se_compr_off, max_pd_time, set_gradino2, modo_vent_f2, ist_comp1_cw, f1, defrost_type, minute, ore_comp2_ca | 0 | 0 | Setback Mode: Dehumidification Setpoint |
| 1.3.6.1.4.1.9839.2.1.3.18 | humidSetp, dns1-4, current-hour, unit_model_h1, hu-set, rit_all_temp, sg_ore_comp, ventole_stop_in_sbrin, dly_valve_comp, offset_grad2, min_volt_f3, set_comp2_cw, t_on_fan_f1, n2, defrost_delay, month, max_ore_comp_cb, exist_probe__a | 0 | 0 | Humidification Setpoint |
| 1.3.6.1.4.1.9839.2.1.3.19 | smHumidSetp, dns2-1, current-day, cool_mode_h5, hu-set-sm, config_dig_in1, ore_comp1, time_fermo_post_gocciol, comp_cc, diff_gradino2, max_volt_f4, rit_all_ht_in, ist_comp2_cw, tm_postdripp_fd, r2, alarm_delay_df_door, pyear, ore_pompa_cc | 0 | 0 | Setback Mode: Humidification Setpoint |
| 1.3.6.1.4.1.9839.2.1.3.20 | pwOnDelay, dns2-2, current-month, heat_mode_h6, restart-delay, config_dig_in2, ore_comp2, address_seriale, defrost_type, set_gradino3, t_spunto_v_fb, x_h_main_pump, rit_all_press, f2, dripping_interval, rit_c_f_cond_cd, set_r1 | 0 | 0 | Restart Delay |
| 1.3.6.1.4.1.9839.2.1.3.21 | regulDelay, dns2-3, current-year, en_humidif_h8, regul-delay, look_comp_ext, ore_comp3, en_dis_tasti_ir, dly_def_gas, offset_grad3, t_imp_triac_fc, x_l_main_pump, s1, setpoint_l1, n3, defrost_interval, oil_diff, modo_fan_f2, set_r2 | 0 | 0 | Regulation Start Transitory |
| 1.3.6.1.4.1.9839.2.1.3.22 | lowPdelay, dns2-4, firestat-sp, tempo_di_escursione_valvola_3, time-lowp, delay_activ_alr, codice_abilit_progr_telec_ir, defrost_delay, diff_gradino3, t_min_on_def_d5, x_h_comp1, s8, set_comp1_es, r3, defrost_max_time, min_volt_f3, en_ed_alarm_r3 | 0 | 0 | Low Pressure Delay |
| 1.3.6.1.4.1.9839.2.1.3.23 | thAlarmdelay, hum-hi-sp, prop_pi_re, alarm-delay, enabling_telecom, loc_on_off_ena, alarm_delay_df_door, set_gradino4, t_min_def_d6, x_l_comp1, n_comp_deum, s6, ist_comp1_es, stability__2, f3, fan_drip_interval, max_volt_f4 | 0 | 0 | Temp./Humid.Limits Alarm Delay |
| 1.3.6.1.4.1.9839.2.1.3.24 | regExcTime, ret-air-hi-sp, pi_time_rf, exc-time, sto_after_drip, lan_on_off_ena, dripping_interval, offset_grad4, t_max_def_d7, x_h_comp2, rit_stop_ventp, s9, set_comp2_es, min_setp_r1, n4, aux1_cfg, t_spunto_f_fb, en_t_maxmin_r5 | 0 | 0 | Anti-Hunting Constant |
| 1.3.6.1.4.1.9839.2.1.3.25 | stdbyTime, hum-lo-sp, conf_humid_h9, t-std-by, key_lock, config_out_digit_4, defrost_interval, diff_gradino4, rit_tra_2def_d8, x_l_comp2, rit_part_comp, s10, ist_comp2_es, max_setp_r2, r4, aux2_cfg, t_min_on_def_d5, reg_n_prb3_r6 | 0 | 0 | Stand-by Cycle Base Time |
| 1.3.6.1.4.1.9839.2.1.3.26 | ret-air-lo-sp, ip-Address1-Out, conf_b2_hc, fan_man_f0, config_out_digit_7, defrost_max_time, tast_telecom, wait_on_def_dc, x_h_comp3, rit_interbl, r19, rit_fra_ins, differ_rd, f4, light_sens_1, out_inv_fani, t_min_def_d6, tm_t_maxmin_rt | 0 | 0 | Lower limit alarm of return air temp |
| 1.3.6.1.4.1.9839.2.1.3.27 | lanUnit, ip-Address2-Out, hum-deadband, conf_b3_hd, lan-unit, oper_mode_h1, local_mode, fan_drip_interval, codice_telecom, wait_end_def_dd, x_l_comp3, min_sp_comp, r20, ngt_setp_var_r4, out, light_timer, inverter_compi1, t_max_def_d7 | 0 | 0 | Number of LAN Units |
| 1.3.6.1.4.1.9839.2.1.3.28 | smCycleTime, ip-Address3-Out, hum-setpoint, conf_anout2_hb, ciclo-sm, lan_len, aux1_cfg, rit_all_ag_a3, x_h_comp4, new_pass_ut, r21, rit_bassa_pres, thr_lt_al_al, mode, minmax_acq_time, board_type, rit_2def_1c_d8 | 0 | 0 | Sleep Mode Testing Cycle Time |
| 1.3.6.1.4.1.9839.2.1.3.29 | exv1steps, ip-Address4-Out, start-dly, id_on_off_he, delay_start_compressore, aux2_cfg, r_al_on_flux_p1, x_l_comp4, h3, rit_riaccen, thr_ht_al_ah, link1, haccp_ha_day, unit_status, rit_def_2c_d9, tm_delay_c0 | 0 | 0 | Circuit 1 EXV Valve Position |
| 1.3.6.1.4.1.9839.2.1.3.30 | exv2steps, starting-delay-Second-Pump, alm1-del, al_out_lgk_hf, time_min_tra_acc_compr, light_sens_1, r_al_rg_flux_p2, config_unit, new_pass_cos, h4, rit_tra_ins, id_al_delay_a7, link2, haccp_ha_hour, type_b1, rit_all_ag_a3, tm_btwn_comp_c1 | 0 | 0 | Circuit 2 EXV Valve Position |
| 1.3.6.1.4.1.9839.2.1.3.31 | alm2-del, starting-delay-btw-Pump-Compressor, conf_deshum_ha, time_min_compr_off, sgl_all_min_rel, rit_all_lp_p3, config_type, min_stes_comp, h5, n_res, conf_id_a4, outl1, haccp_ha_min, type_b2, rall_on_flux_p1, comp_off_tm_c2 | 0 | 0 | Optional Alarm 2 Delay |
| 1.3.6.1.4.1.9839.2.1.3.32 | alm3-del, overlap-time-Pumps, conf_id_al_pb, time_min_compr_on, minmax_acq_time, t_buzzer_p4, ph_circ_type, min_tra_comp, p2, n_comp, comp_delay_c0, outl2, haccp_hf_day, bios_release, rall_rg_flux_p2, comp_on_tm_c3 | 0 | 0 | Optional Alarm 3 Delay |
| 1.3.6.1.4.1.9839.2.1.3.33 | alarm1-txt, working-time-Pumps, un_rot_num_h2, sicurezza_rele, haccp_ha_day, riprist_all_p5, n_comps, min_acc_comp, s7, rit_hl, t_al_delay_ad, priority, haccp_hf_hour, bios_date, rit_all_bp_p3, relay_safety_c4 | 0 | 0 | Message on optional alarm screen, some also add function |
| 1.3.6.1.4.1.9839.2.1.3.34 | alarm2-txt, running-time-Chillers, un_rot_adr_h3, time_escl_alrm_dopo_ciclo_cont, haccp_ha_hour, day, selez_id1_p8, comps_x_unit, rit_resistenze, keycode_sv_h5, alcomm, haccp_hf_min, boot_release, buzzer_p4, cnt_cycl_dur_cc | 0 | 0 | Message on optional alarm screen, some also add function |
| 1.3.6.1.4.1.9839.2.1.3.35 | alarm3-txt, overlap-time-Chillers, rot_time_h4, delay_start_valve_comp, haccp_ha_min, month, selez_id2_p9, n_unloaders, tempo_max, h18, en_def_mf_h1, dk1, haccp_alarm_delay, boot_date, modello_h1, al_time_excl_c6 | 0 | 0 | Message on optional alarm screen, some also add function |
| 1.3.6.1.4.1.9839.2.1.3.36 | alarm4-txt, n-chillers-Max, presenza_sonda_1, durata_ciclo_continuo, haccp_hf_day, pyear, modello_mac_h1, cond_fans, min_apertura, c1, t_betw_2_on_c1, dk2, defrost_t1_dd, modo_pompa_h5, defrost_type_d0 | 0 | 0 | Message on optional alarm screen, some also add function |
| 1.3.6.1.4.1.9839.2.1.3.37 | comp-sel, n-chillers-ON, tipo_sonda_2, tipo_sbrinamento, haccp_hf_hour, lday, modo_pmp_vnt_h5, fan1_speed_reg, sgl_macchina, c2, min_off_time_c2, defrost_t1_hh, time_switch_on1, blocca_tasti_h9, tm_btwn_defs_di | 0 | 0 | Comps 0=none, 1=one, 2=one+UL, 3=two, 4=two+UL, 5=Four/two circuit |
| 1.3.6.1.4.1.9839.2.1.3.38 | dehum-mode, n-pumps-ON, presenza_sonda_3, defrost_cmd, haccp_hf_min, lmonth, blocca_tasti_h9, fan2_speed_reg, c3, set_parz1_cw, min_on_time_c3, defrost_t1_mm, time_switchoff1, def_end_time_dt | 0 | 0 | 0=none, 1= comp limited, 2=twocomp limited, 3= comp unlimited, 4=twocomp unlimited |
| 1.3.6.1.4.1.9839.2.1.3.39 | reheat-sel, time-Enable-Pumps-Chiller-Offline, filtro_digitale, threshold_val_comp_run_def, haccp_rit_alarm, lyear, seradd, freecool_valve, c4, ist_parz1_cw, t_safe_relay_c4, dk5, defrost_t2_dd, time_min_on, delay_def_dc | 0 | 0 | Number of heat stages |
| 1.3.6.1.4.1.9839.2.1.3.40 | hum-sel, time-Running-Pumps-Chiller-Offline, limitazione_ingresso, sbrin_se_ast_da_off_ad_on, defrost_t1_dd, hour, passw_telec_hb, c8, set_parz2_cw, cont_cycle_cc, dk6, defrost_t2_hh, time_min_off, time_wait_def_dd, def_max_time_dp | 0 | 0 | 0=none, 1=comp mod, 2=comp non, 3= comf mod, 4= conf non mod |
| 1.3.6.1.4.1.9839.2.1.3.41 | alm-contact-msg, integral-Time-3Way-Valve-Hydraulic-PID, keyb_lockup_hi, delay_sbrin_astoffon_o_digin, defrost_t1_hh, minute, valv_inv_ch_he, n_res, f1, ist_parz2_cw, offal_postcc_c6, defrost_t2_mm, time_betw_comp, valve_status, def_startup_d4 | 0 | 0 | Text displayed on all alarm screens |
| 1.3.6.1.4.1.9839.2.1.3.42 | powerup-sel, derivative-Time-3Way-Valve-Hydraulic-PID, param_set_hl, stop_vis_in_sbrin, defrost_t1_mm, lhour, numero_term_h8, tempo_integra, f2, def_type_d0, defrost_t3_dd, time_same_comp, def_del_su_d5 | 0 | 0 | 0= start wo/alarm, 1= start w/alarm, 2= requires reset of alarm |
| 1.3.6.1.4.1.9839.2.1.3.43 | buzzer-select, output-Address-3Way-Valve-Hydraulic, display_cfg_hn, skip_defrost_enable, defrost_t2_dd, lminute, high_temp_all_pc, f6, t_betw_def_dl, defrost_t3_hh, unload_delay, stop_vis_def_d6 | 0 | 0 | 0=None, 1=short beeps, 2=long beep, 3=Constant |
| 1.3.6.1.4.1.9839.2.1.3.44 | cw-disp, time-Speed-Up-FCM, buzzer_cfg_p4, time_escl_alrm_dopo_sbrin, defrost_t2_hh, delay_low_press, set_parz1_es, def_end_t_dt, defrost_t3_mm, time_switch_on2, drip_tm_def_dd | 0 | 0 | % of 10volts of analog output #1 |
| 1.3.6.1.4.1.9839.2.1.3.45 | wtrvlv-duty, time-Soft-Start-FCM, alm_reset_p5, priority_sbrin_su_protez_compr, defrost_t2_mm, n_devices1, ist_parz1_es, def_durat_dp, defrost_t4_dd, time_switchoff2, aloff_tm_def_d8 | 0 | 0 | Chilled Water Utilization Over Last Hour - This applies to Chilled water or Energy saver units. |
| 1.3.6.1.4.1.9839.2.1.3.46 | hum-hours-h, intervallo_tra_sbrin, defrost_t3_dd, n_devices2, f14, set_parz2_es, def_delay_d5, defrost_t4_hh, time_betw_fan, def_priority_d9 | 0 | 0 | Humidifier Runtime - high |
| 1.3.6.1.4.1.9839.2.1.3.47 | hum-hours-l, delay-Freecooling, intervallo_tra_pulizie, defrost_t3_hh, n_partial, f15, ist_parz2_es, postdef_dr_t_dd, defrost_t4_mm, rit_dif_olio | 0 | 0 | Humidifier Runtime - low |
| 1.3.6.1.4.1.9839.2.1.3.49 | blower-hours-l, derivative-Time-Freeccoling-PID, sw_release_hr, time_gocciol_dopo_sbrin, defrost_t4_dd, r10, diff_al_fan_a0, defrost_t5_hh, time_base_dc | 0 | 0 | Blower Runtime - low |
| 1.3.6.1.4.1.9839.2.1.3.50 | alm4-del, time-Min-On-Freecooling-Chiller-timing, fan_config_f1, intervallo_rilev_temp_maxmin, defrost_t4_hh, r11, sgl_ore_mac, defrost_t5_mm, machine_config | 0 | 0 | Optional Alarm 4 Delay |
| 1.3.6.1.4.1.9839.2.1.3.51 | assist-sel, time-Min-Off-Freecooling-Chiller-timing, min_volt_f2, stn, defrost_t4_mm, versione_sw_hg, f7, sgl_ore_comp1, defrost_t6_dd, swrel | 0 | 0 | 0= no comp assist, 1=one comp assist, 2= two comp assist, 3... 4... |