Vendor: Hewlett-Packard
Module: CLJ8500-MIB
[Automatically extracted from oidview.com]
status-system OBJECT IDENTIFIER ::= { system 2 }
status-system OBJECT IDENTIFIER ::= { system 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.1 | localization-language | 0 | 0 | Localization language used by the device for device generated PML strings, control panel messages, and text contained in any of t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.2 | not-ready-printer | 0 | 0 | Indicates if any of the sub-systems in the printer are not ready. A sub-system is not ready if the sub-system is unable to perfo… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.3 | not-ready-controller | 0 | 0 | Indicates if the hardware controller sub-system in the device is not ready. If there are no items in the collection (i.e. no bit… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.4 | not-idle | 0 | 0 | Indicates if any of the sub-systems in the device are not idle. The I/O source sub-system is considered not idle if there is unp… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.5 | on-off-line | 0 | 0 | To bring the PDL processing sub-system on or off line. If the device is a printer, then the printer does not process print job da… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.6 | continue | 0 | 0 | A device can support a class of errors called continuable errors. When a continuable error is encountered, the device requires a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.7 | auto-continue | 0 | 0 | Indicates if the device will automatically continue after encountering a continuable error. If AUTO- CONTINUE is set to eOn, the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.8 | install-date | 0 | 0 | Identifies the date that the device was installed. The format of the string is 'YYYYMMDDHHmmZ'. Where: YYYY is the year. MM is the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.10 | perm-store-init-occurred | 0 | 0 | This object will set the cAllPermDevices bit when a full perm storage initialization occurs (as would be the case for a brand new… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.12 | user-nvram-reset | 0 | 0 | Setting to eTrue causes all user NVRAM settings to factory default settings. May also perform POWER-ON- RESET functionality thus… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.17 | date-and-time, localization-language | 0 | 0 | A C structure containing the following fields: typedef struct { ubyte yr; /* year: 0 to 99 */ ubyte mon; /* month: 1 to 12 */ ubyte… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.19 | service-id | 0 | 0 | A read of this object will return the current SERVICE ID value in the printer. The format is 'YYDDD' where: YY = calendar year - … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20 | display | 2 | 7 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.21 | total-ram-size | 0 | 0 | Identifies total amount of RAM, in bytes, available to the controller for general computing. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.22 | status-printer | 0 | 0 | Indicates if any of the sub-systems in the device in a warning condition. A warning condition exists if the sub-system is useabl… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.23 | status-controller, status-controller2 | 0 | 0 | Indicates if the hardware controller sub-system in a warning condition. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.28 | time-display, not-ready-printer | 0 | 0 | Controls front-panel time display format. Set to eTimeDisplayTwelveHour for AM/PM display. Set to eTimeDisplayTwentyFourHour fo… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.35 | job-input-auto-continue-timeout | 0 | 0 | The number of seconds the device waits after a job related continuable error occurs before automatically continuing. An example … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.36 | job-input-auto-continue-mode | 0 | 0 | Returns or sets the device behavior when the desired media is not currently available. cCancelJob - The device cancels the job. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37 | background-message | 4 | 8 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.38 | error-log-clear, not-ready-controller | 0 | 0 | Setting this object clears all the entries in the error log sub-tree. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.40 | job-output-auto-continue-timeout, not-idle | 0 | 0 | Returns or sets the time that the printer will wait after an output bin becomes full and the printer is trying to deliver a sheet… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.42 | collated-originals-support | 0 | 0 | Indicates that the printer can create multiple, collated 'originals' of a job and shows the level of support for this capability.… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.43 | device-cfg-download-error | 0 | 0 | Error status of the configuration download session. POS should indicate the actual error values reserving value 0 as NO ERROR. Ad… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.45 | device-cfg-upload-error | 0 | 0 | Error status of the configuration upload session. POS should indicate the actual error values reserving value 0 as NO ERROR. Addi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.52 | localization-languages-supported, on-off-line | 0 | 0 | The list of languages supported by the device. The languages are primarily, but not limited to, two character codes from ISO 639,… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.53 | localization-countries-supported | 0 | 0 | The list of countries supported by the device. The countries are primarily, but not limited to, two character codes from ISO 3166… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.59 | host-application-available-memory | 0 | 0 | Returns the amount of memory, in bytes, that the device has available for job-related processing or resources. Also known as driv… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.60 | control-panel-button-press | 0 | 0 | Writing this object simulates pressing a button on the control panel. Reading it will return the last key pressed either on the c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.63 | control-panel-display-contents-change-counter | 0 | 0 | A counter which increments whenever the contents of the front panel display changes. This object is implemented as a 32-bit signe… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.64 | control-panel-display-contents-crc | 0 | 0 | Reading this object returns a 32-bit Cyclical Redundancy Check (CRC) which represents the current contents of the display. Additi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.65 | control-panel-display | 1 | 1 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.99 | rtc-time-zone, cancel-active-dry-time | 0 | 0 | A device may normally delay placing a sheet in the output binuntil a certain amount of time has passed (the time is commonlyref… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.100 | automatic-daylight-savings | 0 | 0 | Determines whether or not the automatic adjustment for daylightsavings time is enabled. If it's enabled the device local timewi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.101 | daylight-savings-start | 0 | 0 | A C structure containing the following fields: \\typedef struct { \\ubyte hour; /* hour: 0 to 23 */ \\ubyte weekday; /* weekday… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.102 | daylight-savings-end | 0 | 0 | A C structure containing the following fields: \\typedef struct { \\ubyte hour; /* hour: 0 to 23 */ \\ubyte weekday; /* weekday… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.103 | daylight-savings-offset | 0 | 0 | Controls the offset in minutes to be added to the time when DSTis in effect. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.104 | daylight-savings-reset | 0 | 0 | This object is used to reset (set back to factory default forthe current time zone) or read the current status of the DSTsettin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.105 | warning-log-clear | 0 | 0 | Setting this object clears all the entries in the warning logsub-tree. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.116 | dfa-data-in-nvram | 0 | 0 | This object will act as a Read/Write area for HP print application to facilitate the new Design for Attach Data and Product Warra… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1 | settings-system | 30 | 31 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3 | id | 14 | 14 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4 | interface | 8 | 134 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5 | test | 17 | 17 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6 | job | 6 | 116 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9 | phone | 2 | 10 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10 | file-system | 3 | 32 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11 | errorlog | 90 | 240 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.12 | resource-manager | 1 | 3 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13 | remote-procedure-call | 3 | 28 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.14 | xport-interface | 1 | 3 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.15 | mass-storage-block-driver | 3 | 9 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16 | accounting | 6 | 66 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18 | firmware-download | 7 | 7 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.19 | operating-system | 1 | 1 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20 | upgradable-devices | 8 | 8 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22 | warning20-date-time, warning14-time-stamp, warning6-date-time, warning9-time-stamp, warning18-date-time, warning11-date-time, warning7-code, warning8-code, warning26-time-stamp, warning38-time-stamp, warning19-time-stamp, warning13-date-time, warning40-code, warning45-date-time, warning45-time-stamp, warning32-time-stamp, warning1-code, warning37-time-stamp, warning50-time-stamp, warning16-date-time, warning44-date-time, warning32-date-time, warning33-time-stamp, warning5-date-time, warning27-code, warning25-code, warning44-time-stamp, warning21-code, warning43-time-stamp, warning28-time-stamp, warning30-date-time, warning17-code, warning21-time-stamp, warning47-code, warning8-time-stamp, warning39-time-stamp, warning21-date-time, warning46-code, warning40-date-time, warning42-code, warning39-date-time, warning30-code, warning16-code, warning41-time-stamp, warning18-time-stamp, warning26-code, warning34-code, warning20-code, warning38-date-time, warning40-time-stamp, warning42-date-time, warning25-date-time, warning6-time-stamp, warning22-time-stamp, warning10-code, warning45-code, warning43-code, warning32-code, warning12-code, warning6-code, warning8-date-time, warning35-date-time, warning24-code, warning31-code, warning3-code, warning36-time-stamp, warning4-time-stamp, warning44-code, warning15-code, warning34-date-time, warning17-date-time, warning7-date-time, warning36-code, warning19-date-time, warning49-date-time, warning46-date-time, warning17-time-stamp, warning36-date-time, warning50-code, warning27-date-time, warning11-time-stamp, warning38-code, warning18-code, warning19-code, warning29-time-stamp, warning42-time-stamp, warning4-date-time, warning26-date-time, warning10-date-time, warning23-code, warning9-date-time, warning43-date-time, warning2-code, warning3-time-stamp, warning11-code, warning22-date-time, warning35-time-stamp, warning5-code, warning9-code, warning48-date-time, warning13-time-stamp, warning41-date-time, warning23-time-stamp, warning33-date-time, warning30-time-stamp, warning37-code, warning31-date-time, warning48-code, warning23-date-time, warning24-time-stamp, warning24-date-time, warning33-code, warning49-code, warning15-time-stamp, warning37-date-time, warning5-time-stamp, warning14-code, warning1-time-stamp, warning39-code, warning13-code, warning7-time-stamp, warning29-date-time, warning2-time-stamp, warning20-time-stamp, warning31-time-stamp, warning2-date-time, warning47-date-time, warning28-date-time, warning22-code, warning12-date-time, warning50-date-time, warning47-time-stamp, warning10-time-stamp, warning27-time-stamp, warning46-time-stamp, warning12-time-stamp, warning48-time-stamp, warning1-date-time, warning4-code, warning34-time-stamp, warning49-time-stamp, warning25-time-stamp, warning3-date-time, warning15-date-time, warning16-time-stamp, warning35-code, warning28-code, warning14-date-time, warning41-code, warning29-code | 0 | 0 | This item contains the date and the time at which an warningoccurred. The values returned will be in hexadecimal. If thedate is… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.23 | supports-pjl-user-groups | 0 | 0 | Returns eTrue if the device is able to process PJL user groupvariables. See the PJL Technical Reference for the propersyntax fo… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25 | eprint-supported, eprint-email-address, eprint-enabled, eprint-opt-in, toner-miser-plus-value, eprint-printer-code, toner-miser-plus-supported, eprint-supported-jdi, eprint-jdi-interface, eprint-hp-web-services, eprint-email, protect-ews-info-tab | 0 | 0 | This object reports the current setting of ePrint e-mail. |