To bring the PDL processing sub-system on or off line.
If the device is a printer, then the printer does not
process print job data when the printer is off line.
PML communication persists.
Additional information:
The value of this object is eOnline
whenever the printer is in the ready state. This object
will return eOffline only when an alert is active. For
example, the printer will go eOffline if the cover is
open, if the toner cartridge is removed, or if the paper
trays are all empty. It is not possible to change the
state of the printer with this object.
Parsed from file lj3200_snmp.mib.txt
Company: None
Module: LJ3200-MIB
To bring the PDL processing sub-system on or off line.
If the device is a printer, then the printer does not
process print job data when the printer is off line.
PML communication persists.
Additional information:
When the printer is in the Offline state,
printing will stop as soon as possible (no more sheets
of media are pulled from input trays). All I/O
communication continues (no change from the Online
state).
Setting to eOnline has the following affect:
Printer will immediately go to or remain in the Online
state;
If the printer's current state
is Offline with a pending error condition that
prevents the printer from going to the Online
state, the printer will remain in the Offline state;
Setting to eOffline has the following affect:
Printer will immediately go to or remain in the
Offline state;
If pages are being printed, those pages will complete
with the printer in the Offline state.
Setting to eOfflineAtEndOfJob has the following
affect:
If not in a job or already in the Offline state, the
printer will immediately go to or remain in the
Offline state;
If in a job and the current state is Online, the
printer will remain in the Online state, with the
value of this object as eOfflineAtEndOfJob, until the
end of the job;
the job, the printer goes to the Offline state and the
value of this object becomes eOffline.
Setting this object to eOffline or eOnline before the
end of the job causes the action for that value to be
taken immediately.
Parsed from file LaserJet5Si-MIB.mib
Module: LaserJet5Si-MIB
Vendor: Hewlett-Packard
Module: CLJ8500-MIB
[Automatically extracted from oidview.com]
on-off-line OBJECT-TYPE SYNTAX INTEGER { eOnline(1), eOffline(2) } ACCESS read-only STATUS optional DESCRIPTION "To bring the PDL processing sub-system on or off line. If the device is a printer, then the printer does not process print job data when the printer is off line. PML communication persists. Additional information: The value of this object is eOnline whenever the printer is in the ready state. This object will return eOffline only when an alert is active. For example, the printer will go eOffline if the cover is open, if the toner cartridge is removed, or if the paper trays are all empty. It is not possible to change the state of the printer with this object. " ::= { status-system 5 }
on-off-line OBJECT-TYPE SYNTAX INTEGER { eOnline(1), eOffline(2), eOfflineAtEndOfJob(3) } ACCESS read-write STATUS optional DESCRIPTION "To bring the PDL processing sub-system on or off line. If the device is a printer, then the printer does not process print job data when the printer is off line. PML communication persists. Additional information: When the printer is in the Offline state, printing will stop as soon as possible (no more sheets of media are pulled from input trays). All I/O communication continues (no change from the Online state). Setting to eOnline has the following affect: Printer will immediately go to or remain in the Online state;
status is returned. If the printer's current state is Offline with a pending error condition that prevents the printer from going to the Online state, the printer will remain in the Offline state; status is returned. Setting to eOffline has the following affect: Printer will immediately go to or remain in the Offline state; status is returned. If pages are being printed, those pages will complete with the printer in the Offline state. Setting to eOfflineAtEndOfJob has the following affect: If not in a job or already in the Offline state, the printer will immediately go to or remain in the Offline state; status is returned. If in a job and the current state is Online, the printer will remain in the Online state, with the value of this object as eOfflineAtEndOfJob, until the end of the job; status is returned. At the end of the job, the printer goes to the Offline state and the value of this object becomes eOffline. Setting this object to eOffline or eOnline before the end of the job causes the action for that value to be taken immediately." ::= { status-system 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.1 | localization-language | 0 | 0 | Localization language used by the device for device generated PML strings, control panel messages, and text contained in any of t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.2 | not-ready-printer | 0 | 0 | Indicates if any of the sub-systems in the printer are not ready. A sub-system is not ready if the sub-system is unable to perfo… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.3 | not-ready-controller | 0 | 0 | Indicates if the hardware controller sub-system in the device is not ready. If there are no items in the collection (i.e. no bit… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.4 | not-idle | 0 | 0 | Indicates if any of the sub-systems in the device are not idle. The I/O source sub-system is considered not idle if there is unp… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.6 | continue | 0 | 0 | A device can support a class of errors called continuable errors. When a continuable error is encountered, the device requires a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.7 | auto-continue | 0 | 0 | Indicates if the device will automatically continue after encountering a continuable error. If AUTO- CONTINUE is set to eOn, the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.8 | install-date | 0 | 0 | Identifies the date that the device was installed. The format of the string is 'YYYYMMDDHHmmZ'. Where: YYYY is the year. MM is the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.10 | perm-store-init-occurred | 0 | 0 | This object will set the cAllPermDevices bit when a full perm storage initialization occurs (as would be the case for a brand new… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.12 | user-nvram-reset | 0 | 0 | Setting to eTrue causes all user NVRAM settings to factory default settings. May also perform POWER-ON- RESET functionality thus… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.17 | date-and-time, localization-language | 0 | 0 | A C structure containing the following fields: typedef struct { ubyte yr; /* year: 0 to 99 */ ubyte mon; /* month: 1 to 12 */ ubyte… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.19 | service-id | 0 | 0 | A read of this object will return the current SERVICE ID value in the printer. The format is 'YYDDD' where: YY = calendar year - … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20 | display | 2 | 7 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.21 | total-ram-size | 0 | 0 | Identifies total amount of RAM, in bytes, available to the controller for general computing. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.22 | status-printer | 0 | 0 | Indicates if any of the sub-systems in the device in a warning condition. A warning condition exists if the sub-system is useabl… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.23 | status-controller, status-controller2 | 0 | 0 | Indicates if the hardware controller sub-system in a warning condition. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.28 | time-display, not-ready-printer | 0 | 0 | Controls front-panel time display format. Set to eTimeDisplayTwelveHour for AM/PM display. Set to eTimeDisplayTwentyFourHour fo… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.35 | job-input-auto-continue-timeout | 0 | 0 | The number of seconds the device waits after a job related continuable error occurs before automatically continuing. An example … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.36 | job-input-auto-continue-mode | 0 | 0 | Returns or sets the device behavior when the desired media is not currently available. cCancelJob - The device cancels the job. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37 | background-message | 4 | 8 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.38 | error-log-clear, not-ready-controller | 0 | 0 | Setting this object clears all the entries in the error log sub-tree. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.40 | job-output-auto-continue-timeout, not-idle | 0 | 0 | Returns or sets the time that the printer will wait after an output bin becomes full and the printer is trying to deliver a sheet… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.42 | collated-originals-support | 0 | 0 | Indicates that the printer can create multiple, collated 'originals' of a job and shows the level of support for this capability.… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.43 | device-cfg-download-error | 0 | 0 | Error status of the configuration download session. POS should indicate the actual error values reserving value 0 as NO ERROR. Ad… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.45 | device-cfg-upload-error | 0 | 0 | Error status of the configuration upload session. POS should indicate the actual error values reserving value 0 as NO ERROR. Addi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.52 | localization-languages-supported, on-off-line | 0 | 0 | The list of languages supported by the device. The languages are primarily, but not limited to, two character codes from ISO 639,… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.53 | localization-countries-supported | 0 | 0 | The list of countries supported by the device. The countries are primarily, but not limited to, two character codes from ISO 3166… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.59 | host-application-available-memory | 0 | 0 | Returns the amount of memory, in bytes, that the device has available for job-related processing or resources. Also known as driv… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.60 | control-panel-button-press | 0 | 0 | Writing this object simulates pressing a button on the control panel. Reading it will return the last key pressed either on the c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.63 | control-panel-display-contents-change-counter | 0 | 0 | A counter which increments whenever the contents of the front panel display changes. This object is implemented as a 32-bit signe… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.64 | control-panel-display-contents-crc | 0 | 0 | Reading this object returns a 32-bit Cyclical Redundancy Check (CRC) which represents the current contents of the display. Additi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.65 | control-panel-display | 1 | 1 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.99 | rtc-time-zone, cancel-active-dry-time | 0 | 0 | A device may normally delay placing a sheet in the output binuntil a certain amount of time has passed (the time is commonlyref… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.100 | automatic-daylight-savings | 0 | 0 | Determines whether or not the automatic adjustment for daylightsavings time is enabled. If it's enabled the device local timewi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.101 | daylight-savings-start | 0 | 0 | A C structure containing the following fields: \\typedef struct { \\ubyte hour; /* hour: 0 to 23 */ \\ubyte weekday; /* weekday… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.102 | daylight-savings-end | 0 | 0 | A C structure containing the following fields: \\typedef struct { \\ubyte hour; /* hour: 0 to 23 */ \\ubyte weekday; /* weekday… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.103 | daylight-savings-offset | 0 | 0 | Controls the offset in minutes to be added to the time when DSTis in effect. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.104 | daylight-savings-reset | 0 | 0 | This object is used to reset (set back to factory default forthe current time zone) or read the current status of the DSTsettin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.105 | warning-log-clear | 0 | 0 | Setting this object clears all the entries in the warning logsub-tree. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.116 | dfa-data-in-nvram | 0 | 0 | This object will act as a Read/Write area for HP print application to facilitate the new Design for Attach Data and Product Warra… |