Returns or sets the device behavior when the desired
media is not currently available.
cCancelJob - The device cancels the job. The device
POS should explain what happens if this item is not the
only item in the collection.
cAutoMediaSizeOverride - The device is allowed to
substitute a different size media.
cAutoMediaNameOverride - The device is allowed to
substitute a different media name.
cUSMediaSizeOverride - The device is allowed to
substitute US media sizes (letter, etc.) for ISO media
sizes (A4, etc.).
cISOMediaSizeOverride - The device is allowed to
substitute ISO media sizes (A4, etc.) for US media
sizes (letter, etc.).
Additional information:
If cCancelJob is set, the current print job will
be canceled regardless of other item settings. At
least one bit of the collection must be set; setting
this object to zero will cause a status of
This object applies to all media requests, including
Manual Feed Requests. This object describes the
action that is performed when the
JOB-INPUT-AUTO-CONTINUE-TIMEOUT expires. The action
performed by the CONTINUE object being set to
eInitiateAction or the GO key being pressed on the
control panel may cause different actions.
The data for this object is stored in NVRAM.
Parsed from file lj4100mfp_beta.mib.txt
Company: None
Module: LJ4100mfp-MIB
Returns or sets the device behavior when the desired
media is not currently available.
cCancelJob - The device cancels the job. The device
POS should explain what happens if this item is not the
only item in the collection.
cAutoMediaSizeOverride - The device is allowed to
substitute a different size media.
cAutoMediaNameOverride - The device is allowed to
substitute a different media name.
Additional information:
If cCancelJob is set, the current print job will
be canceled regardless of other item settings. At least one bit of the
collection must be set; setting this object to zero will cause a status of
This object applies to all media requests, including Manual Feed Requests.
This object describes the action that is performed when the
JOB-INPUT-AUTO-CONTINUE-TIMEOUT expires. The action performed by the CONTINUE
object being set to eInitiateAction or the Select key being pressed on
the control panel may cause different actions.
Parsed from file LaserJet5Si-MIB.mib
Module: LaserJet5Si-MIB
Vendor: Hewlett-Packard
Module: CLJ8500-MIB
[Automatically extracted from oidview.com]
job-input-auto-continue-mode OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION "Returns or sets the device behavior when the desired media is not currently available. cCancelJob - The device cancels the job. The device POS should explain what happens if this item is not the only item in the collection. cAutoMediaSizeOverride - The device is allowed to substitute a different size media. cAutoMediaNameOverride - The device is allowed to substitute a different media name. cUSMediaSizeOverride - The device is allowed to substitute US media sizes (letter, etc.) for ISO media sizes (A4, etc.). cISOMediaSizeOverride - The device is allowed to substitute ISO media sizes (A4, etc.) for US media sizes (letter, etc.). Additional information: If cCancelJob is set, the current print job will be canceled regardless of other item settings. At least one bit of the collection must be set; setting this object to zero will cause a status of
to be returned. This object applies to all media requests, including Manual Feed Requests. This object describes the action that is performed when the JOB-INPUT-AUTO-CONTINUE-TIMEOUT expires. The action performed by the CONTINUE object being set to eInitiateAction or the GO key being pressed on the control panel may cause different actions. The data for this object is stored in NVRAM." ::= { status-system 36 }
job-input-auto-continue-mode OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS optional DESCRIPTION "Returns or sets the device behavior when the desired media is not currently available. cCancelJob - The device cancels the job. The device POS should explain what happens if this item is not the only item in the collection. cAutoMediaSizeOverride - The device is allowed to substitute a different size media. cAutoMediaNameOverride - The device is allowed to substitute a different media name. Additional information: If cCancelJob is set, the current print job will be canceled regardless of other item settings. At least one bit of the collection must be set; setting this object to zero will cause a status of
to be returned. This object applies to all media requests, including Manual Feed Requests. This object describes the action that is performed when the JOB-INPUT-AUTO-CONTINUE-TIMEOUT expires. The action performed by the CONTINUE object being set to eInitiateAction or the Select key being pressed on the control panel may cause different actions. " ::= { status-system 36 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.1 | localization-language | 0 | 0 | Localization language used by the device for device generated PML strings, control panel messages, and text contained in any of t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.2 | not-ready-printer | 0 | 0 | Indicates if any of the sub-systems in the printer are not ready. A sub-system is not ready if the sub-system is unable to perfo… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.3 | not-ready-controller | 0 | 0 | Indicates if the hardware controller sub-system in the device is not ready. If there are no items in the collection (i.e. no bit… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.4 | not-idle | 0 | 0 | Indicates if any of the sub-systems in the device are not idle. The I/O source sub-system is considered not idle if there is unp… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.5 | on-off-line | 0 | 0 | To bring the PDL processing sub-system on or off line. If the device is a printer, then the printer does not process print job da… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.6 | continue | 0 | 0 | A device can support a class of errors called continuable errors. When a continuable error is encountered, the device requires a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.7 | auto-continue | 0 | 0 | Indicates if the device will automatically continue after encountering a continuable error. If AUTO- CONTINUE is set to eOn, the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.8 | install-date | 0 | 0 | Identifies the date that the device was installed. The format of the string is 'YYYYMMDDHHmmZ'. Where: YYYY is the year. MM is the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.10 | perm-store-init-occurred | 0 | 0 | This object will set the cAllPermDevices bit when a full perm storage initialization occurs (as would be the case for a brand new… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.12 | user-nvram-reset | 0 | 0 | Setting to eTrue causes all user NVRAM settings to factory default settings. May also perform POWER-ON- RESET functionality thus… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.17 | date-and-time, localization-language | 0 | 0 | A C structure containing the following fields: typedef struct { ubyte yr; /* year: 0 to 99 */ ubyte mon; /* month: 1 to 12 */ ubyte… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.19 | service-id | 0 | 0 | A read of this object will return the current SERVICE ID value in the printer. The format is 'YYDDD' where: YY = calendar year - … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20 | display | 2 | 7 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.21 | total-ram-size | 0 | 0 | Identifies total amount of RAM, in bytes, available to the controller for general computing. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.22 | status-printer | 0 | 0 | Indicates if any of the sub-systems in the device in a warning condition. A warning condition exists if the sub-system is useabl… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.23 | status-controller, status-controller2 | 0 | 0 | Indicates if the hardware controller sub-system in a warning condition. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.28 | time-display, not-ready-printer | 0 | 0 | Controls front-panel time display format. Set to eTimeDisplayTwelveHour for AM/PM display. Set to eTimeDisplayTwentyFourHour fo… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.35 | job-input-auto-continue-timeout | 0 | 0 | The number of seconds the device waits after a job related continuable error occurs before automatically continuing. An example … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37 | background-message | 4 | 8 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.38 | error-log-clear, not-ready-controller | 0 | 0 | Setting this object clears all the entries in the error log sub-tree. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.40 | job-output-auto-continue-timeout, not-idle | 0 | 0 | Returns or sets the time that the printer will wait after an output bin becomes full and the printer is trying to deliver a sheet… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.42 | collated-originals-support | 0 | 0 | Indicates that the printer can create multiple, collated 'originals' of a job and shows the level of support for this capability.… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.43 | device-cfg-download-error | 0 | 0 | Error status of the configuration download session. POS should indicate the actual error values reserving value 0 as NO ERROR. Ad… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.45 | device-cfg-upload-error | 0 | 0 | Error status of the configuration upload session. POS should indicate the actual error values reserving value 0 as NO ERROR. Addi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.52 | localization-languages-supported, on-off-line | 0 | 0 | The list of languages supported by the device. The languages are primarily, but not limited to, two character codes from ISO 639,… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.53 | localization-countries-supported | 0 | 0 | The list of countries supported by the device. The countries are primarily, but not limited to, two character codes from ISO 3166… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.59 | host-application-available-memory | 0 | 0 | Returns the amount of memory, in bytes, that the device has available for job-related processing or resources. Also known as driv… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.60 | control-panel-button-press | 0 | 0 | Writing this object simulates pressing a button on the control panel. Reading it will return the last key pressed either on the c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.63 | control-panel-display-contents-change-counter | 0 | 0 | A counter which increments whenever the contents of the front panel display changes. This object is implemented as a 32-bit signe… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.64 | control-panel-display-contents-crc | 0 | 0 | Reading this object returns a 32-bit Cyclical Redundancy Check (CRC) which represents the current contents of the display. Additi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.65 | control-panel-display | 1 | 1 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.99 | rtc-time-zone, cancel-active-dry-time | 0 | 0 | A device may normally delay placing a sheet in the output binuntil a certain amount of time has passed (the time is commonlyref… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.100 | automatic-daylight-savings | 0 | 0 | Determines whether or not the automatic adjustment for daylightsavings time is enabled. If it's enabled the device local timewi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.101 | daylight-savings-start | 0 | 0 | A C structure containing the following fields: \\typedef struct { \\ubyte hour; /* hour: 0 to 23 */ \\ubyte weekday; /* weekday… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.102 | daylight-savings-end | 0 | 0 | A C structure containing the following fields: \\typedef struct { \\ubyte hour; /* hour: 0 to 23 */ \\ubyte weekday; /* weekday… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.103 | daylight-savings-offset | 0 | 0 | Controls the offset in minutes to be added to the time when DSTis in effect. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.104 | daylight-savings-reset | 0 | 0 | This object is used to reset (set back to factory default forthe current time zone) or read the current status of the DSTsettin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.105 | warning-log-clear | 0 | 0 | Setting this object clears all the entries in the warning logsub-tree. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.116 | dfa-data-in-nvram | 0 | 0 | This object will act as a Read/Write area for HP print application to facilitate the new Design for Attach Data and Product Warra… |