Indicates if the hardware controller sub-system in the
device is not ready. If there are no items in the
collection (i.e. no bits are set), then the hardware
controller sub-system is ready. If there is an item
present, then the item indicates what is causing the
hardware controller sub-system to be not ready. If the
cControllerFailure item is in the collection, then a
hardware error was detected on the main controller PC
board, sometimes called the formatter or the logic
broad. Example controller hardware errors include DRAM
controller failure, clock failure, memory parity error,
and ROM CRC error. The cFirmwareFailure item is in the
collection if a firmware/software error was detected.
Device specific detailed error information can be
retrieved from the error log objects, if the device
supports those objects. The POS will list which device
failures cause each item to be included in the
collection.
Additional information:
A controller failure occurrence will set the
cControllerFailure bit (bit 1). The controller
failures are: 62.X Service, 63 Service, 65 Service,
67 Service, 68 Service, and 68 Error.
A SIMM failure occurrence will set the cSIMMFailure
bit (bit 2). The SIMM failures are 61.X Service,
53-XY-ZZ Error, and 72 Service.
A DISK failure occurrence will set the cATFailure
bit (bit 3). The DISK failure is FS DISK FAILURE.
Parsed from file LJ4V.MIB.txt
Company: None
Module: LaserJet4V-MIB
Indicates if the hardware controller sub-system in the
device is not ready. If there are no items in the
collection (i.e. no bits are set), then the hardware
controller sub-system is ready. If there is an item
present, then the item indicates what is causing the
hardware controller sub-system to be not ready. If the
cControllerFailure item is in the collection, then a
hardware error was detected on the main controller PC
board, sometimes called the formatter or the logic
broad. Example controller hardware errors include DRAM
controller failure, clock failure, memory parity error,
and ROM CRC error. The cFirmwareFailure item is in the
collection if a firmware/software error was detected.
Device specific detailed error information can be
retrieved from the error log objects, if the device
supports those objects. The POS will list which device
failures cause each item to be included in the
collection.
Additional information:
A controller failure occurrence will set the
cControllerFailure bit (bit 1). The controller
failures are: 62.X Service, 63 Service, 65 Service,
67 Service, 68 Service, and 68 Error.
A SIMM failure occurrence will set the cSIMMFailure
bit (bit 2). The SIMM failures are 61.X Service,
53-XY-ZZ Error, and 72 Service.
A DISK failure occurrence will set the cATFailure
bit (bit 3). The DISK failure is FS DISK FAILURE.
Parsed from file LaserJet4V-MIB.mib
Module: LaserJet4V-MIB
Vendor: Hewlett-Packard
Module: HP-LASERJET-COMMON-MIB
[Automatically extracted from oidview.com]
not-ready-controller OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "Indicates if the hardware controller sub-system in the device is not ready. If there are no items in the collection (i.e. no bits are set), then the hardware controller sub-system is ready. If there is an item present, then the item indicates what is causing the hardware controller sub-system to be not ready. If the cControllerFailure item is in the collection, then a hardware error was detected on the main controller PC board, sometimes called the formatter or the logic broad. Example controller hardware errors include DRAM controller failure, clock failure, memory parity error, and ROM CRC error. The cFirmwareFailure item is in the collection if a firmware/software error was detected. Device specific detailed error information can be retrieved from the error log objects, if the device supports those objects. The POS will list which device failures cause each item to be included in the collection. Additional information: A controller failure occurrence will set the cControllerFailure bit (bit 1). The controller failures are: 62.X Service, 63 Service, 65 Service, 67 Service, 68 Service, and 68 Error. A SIMM failure occurrence will set the cSIMMFailure bit (bit 2). The SIMM failures are 61.X Service, 53-XY-ZZ Error, and 72 Service. A DISK failure occurrence will set the cATFailure bit (bit 3). The DISK failure is FS DISK FAILURE." ::= { status-system 3 }
not-ready-controller OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "Indicates if the hardware controller sub-system in the device is not ready. If there are no items in the collection (i.e. no bits are set), then the hardware controller sub-system is ready. If there is an item present, then the item indicates what is causing the hardware controller sub-system to be not ready. If the cControllerFailure item is in the collection, then a hardware error was detected on the main controller PC board, sometimes called the formatter or the logic broad. Example controller hardware errors include DRAM controller failure, clock failure, memory parity error, and ROM CRC error. The cFirmwareFailure item is in the collection if a firmware/software error was detected. Device specific detailed error information can be retrieved from the error log objects, if the device supports those objects. The POS will list which device failures cause each item to be included in the collection. Additional information: A controller failure occurrence will set the cControllerFailure bit (bit 1). The controller failures are: 62.X Service, 63 Service, 65 Service, 67 Service, 68 Service, and 68 Error. A SIMM failure occurrence will set the cSIMMFailure bit (bit 2). The SIMM failures are 61.X Service, 53-XY-ZZ Error, and 72 Service. A DISK failure occurrence will set the cATFailure bit (bit 3). The DISK failure is FS DISK FAILURE." ::= { status-system 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.1 | localization-language | 0 | 0 | Localization language used by the device for device generated PML strings, control panel messages, and text contained in any of t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.2 | not-ready-printer | 0 | 0 | Indicates if any of the sub-systems in the printer are not ready. A sub-system is not ready if the sub-system is unable to perfo… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.4 | not-idle | 0 | 0 | Indicates if any of the sub-systems in the device are not idle. The I/O source sub-system is considered not idle if there is unp… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.5 | on-off-line | 0 | 0 | To bring the PDL processing sub-system on or off line. If the device is a printer, then the printer does not process print job da… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.6 | continue | 0 | 0 | A device can support a class of errors called continuable errors. When a continuable error is encountered, the device requires a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.7 | auto-continue | 0 | 0 | Indicates if the device will automatically continue after encountering a continuable error. If AUTO- CONTINUE is set to eOn, the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.8 | install-date | 0 | 0 | Identifies the date that the device was installed. The format of the string is 'YYYYMMDDHHmmZ'. Where: YYYY is the year. MM is the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.10 | perm-store-init-occurred | 0 | 0 | This object will set the cAllPermDevices bit when a full perm storage initialization occurs (as would be the case for a brand new… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.12 | user-nvram-reset | 0 | 0 | Setting to eTrue causes all user NVRAM settings to factory default settings. May also perform POWER-ON- RESET functionality thus… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.17 | date-and-time, localization-language | 0 | 0 | A C structure containing the following fields: typedef struct { ubyte yr; /* year: 0 to 99 */ ubyte mon; /* month: 1 to 12 */ ubyte… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.19 | service-id | 0 | 0 | A read of this object will return the current SERVICE ID value in the printer. The format is 'YYDDD' where: YY = calendar year - … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20 | display | 2 | 7 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.21 | total-ram-size | 0 | 0 | Identifies total amount of RAM, in bytes, available to the controller for general computing. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.22 | status-printer | 0 | 0 | Indicates if any of the sub-systems in the device in a warning condition. A warning condition exists if the sub-system is useabl… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.23 | status-controller, status-controller2 | 0 | 0 | Indicates if the hardware controller sub-system in a warning condition. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.28 | time-display, not-ready-printer | 0 | 0 | Controls front-panel time display format. Set to eTimeDisplayTwelveHour for AM/PM display. Set to eTimeDisplayTwentyFourHour fo… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.35 | job-input-auto-continue-timeout | 0 | 0 | The number of seconds the device waits after a job related continuable error occurs before automatically continuing. An example … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.36 | job-input-auto-continue-mode | 0 | 0 | Returns or sets the device behavior when the desired media is not currently available. cCancelJob - The device cancels the job. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37 | background-message | 4 | 8 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.38 | error-log-clear, not-ready-controller | 0 | 0 | Setting this object clears all the entries in the error log sub-tree. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.40 | job-output-auto-continue-timeout, not-idle | 0 | 0 | Returns or sets the time that the printer will wait after an output bin becomes full and the printer is trying to deliver a sheet… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.42 | collated-originals-support | 0 | 0 | Indicates that the printer can create multiple, collated 'originals' of a job and shows the level of support for this capability.… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.43 | device-cfg-download-error | 0 | 0 | Error status of the configuration download session. POS should indicate the actual error values reserving value 0 as NO ERROR. Ad… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.45 | device-cfg-upload-error | 0 | 0 | Error status of the configuration upload session. POS should indicate the actual error values reserving value 0 as NO ERROR. Addi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.52 | localization-languages-supported, on-off-line | 0 | 0 | The list of languages supported by the device. The languages are primarily, but not limited to, two character codes from ISO 639,… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.53 | localization-countries-supported | 0 | 0 | The list of countries supported by the device. The countries are primarily, but not limited to, two character codes from ISO 3166… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.59 | host-application-available-memory | 0 | 0 | Returns the amount of memory, in bytes, that the device has available for job-related processing or resources. Also known as driv… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.60 | control-panel-button-press | 0 | 0 | Writing this object simulates pressing a button on the control panel. Reading it will return the last key pressed either on the c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.63 | control-panel-display-contents-change-counter | 0 | 0 | A counter which increments whenever the contents of the front panel display changes. This object is implemented as a 32-bit signe… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.64 | control-panel-display-contents-crc | 0 | 0 | Reading this object returns a 32-bit Cyclical Redundancy Check (CRC) which represents the current contents of the display. Additi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.65 | control-panel-display | 1 | 1 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.99 | rtc-time-zone, cancel-active-dry-time | 0 | 0 | A device may normally delay placing a sheet in the output binuntil a certain amount of time has passed (the time is commonlyref… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.100 | automatic-daylight-savings | 0 | 0 | Determines whether or not the automatic adjustment for daylightsavings time is enabled. If it's enabled the device local timewi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.101 | daylight-savings-start | 0 | 0 | A C structure containing the following fields: \\typedef struct { \\ubyte hour; /* hour: 0 to 23 */ \\ubyte weekday; /* weekday… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.102 | daylight-savings-end | 0 | 0 | A C structure containing the following fields: \\typedef struct { \\ubyte hour; /* hour: 0 to 23 */ \\ubyte weekday; /* weekday… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.103 | daylight-savings-offset | 0 | 0 | Controls the offset in minutes to be added to the time when DSTis in effect. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.104 | daylight-savings-reset | 0 | 0 | This object is used to reset (set back to factory default forthe current time zone) or read the current status of the DSTsettin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.105 | warning-log-clear | 0 | 0 | Setting this object clears all the entries in the warning logsub-tree. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.116 | dfa-data-in-nvram | 0 | 0 | This object will act as a Read/Write area for HP print application to facilitate the new Design for Attach Data and Product Warra… |