Setting to eTrue causes all user NVRAM settings to
factory default settings. May also perform POWER-ON-
RESET functionality thus loosing print job data. The
POS will list which objects are effected by a user NVRAM
reset. Some items are NVRAM settings, but not user
controllable, so this action may not cause all of NVRAM
to be reset. Some examples of NVRAM settings that may
not be affected are page count, internally used pen
information, line configuration information, etc.
Additional information:
Setting to eTrue returns the NVRAM items listed
below to their factory default values. Performs
the same function as the 'MENU RESET' function
supported by the control panel except when printer
is in Offline state, setting this OID to eTrue will
not take the printer to the Online state.
DEFAULT-COPIES
DEFAULT-MEDIA-SIZE
DEFAULT-ORIENTATION
DEFAULT-LINES-PER-PAGE
DEFAULT-MANUAL-FEED
DEFAULT-RET
DEFAULT-PRINT-QUALITY
PCL-DEFAULT-FONT-SOURCE
PCL-DEFAULT-FONT-NUMBER
PCL-DEFAULT-FONT-HEIGHT
PCL-DEFAULT-FONT-WIDTH
PCL-DEFAULT-SYMBOL-SET
DEFAULT-VERTICAL-BLACK-RESOLUTION
DEFAULT-HORIZONTAL-BLACK-RESOLUTION
DEFAULT-PDL
CONTEXT-SENSITIVE-PDL-SELECTION
ENERGY-STAR
IO-TIMEOUT
DEFAULT-PAGE-PROTECT
POSTSCRIPT-JAM-RECOVERY (PostScript installed)
POSTSCRIPT-PRINT-ERRORS (PostScript installed)
Parsed from file LJ4V.MIB.txt
Company: None
Module: LaserJet4V-MIB
Setting to eTrue causes all user NVRAM settings to
factory default settings. May also perform POWER-ON-
RESET functionality thus loosing print job data. The
POS will list which objects are effected by a user NVRAM
reset. Some items are NVRAM settings, but not user
controllable, so this action may not cause all of NVRAM
to be reset. Some examples of NVRAM settings that may
not be affected are page count, internally used pen
information, line configuration information, etc.
Additional information:
Setting to eTrue returns the NVRAM items listed
below to their factory default values. Performs
the same function as the 'MENU RESET' function
supported by the control panel except when printer
is in Offline state, setting this OID to eTrue will
not take the printer to the Online state.
DEFAULT-COPIES
DEFAULT-MEDIA-SIZE
DEFAULT-ORIENTATION
DEFAULT-LINES-PER-PAGE
DEFAULT-MANUAL-FEED
DEFAULT-RET
DEFAULT-PRINT-QUALITY
PCL-DEFAULT-FONT-SOURCE
PCL-DEFAULT-FONT-NUMBER
PCL-DEFAULT-FONT-HEIGHT
PCL-DEFAULT-FONT-WIDTH
PCL-DEFAULT-SYMBOL-SET
DEFAULT-VERTICAL-BLACK-RESOLUTION
DEFAULT-HORIZONTAL-BLACK-RESOLUTION
DEFAULT-PDL
CONTEXT-SENSITIVE-PDL-SELECTION
ENERGY-STAR
IO-TIMEOUT
DEFAULT-PAGE-PROTECT
POSTSCRIPT-JAM-RECOVERY (PostScript installed)
POSTSCRIPT-PRINT-ERRORS (PostScript installed)
Parsed from file LaserJet4V-MIB.mib
Module: LaserJet4V-MIB
Vendor: Hewlett-Packard
Module: HP-LASERJET-COMMON-MIB
[Automatically extracted from oidview.com]
user-nvram-reset OBJECT-TYPE SYNTAX INTEGER { eTrue(1) } ACCESS write-only STATUS optional DESCRIPTION "Setting to eTrue causes all user NVRAM settings to factory default settings. May also perform POWER-ON- RESET functionality thus loosing print job data. The POS will list which objects are effected by a user NVRAM reset. Some items are NVRAM settings, but not user controllable, so this action may not cause all of NVRAM to be reset. Some examples of NVRAM settings that may not be affected are page count, internally used pen information, line configuration information, etc. Additional information: Setting to eTrue returns the NVRAM items listed below to their factory default values. Performs the same function as the 'MENU RESET' function supported by the control panel except when printer is in Offline state, setting this OID to eTrue will not take the printer to the Online state. DEFAULT-COPIES DEFAULT-MEDIA-SIZE DEFAULT-ORIENTATION DEFAULT-LINES-PER-PAGE DEFAULT-MANUAL-FEED DEFAULT-RET DEFAULT-PRINT-QUALITY PCL-DEFAULT-FONT-SOURCE PCL-DEFAULT-FONT-NUMBER PCL-DEFAULT-FONT-HEIGHT PCL-DEFAULT-FONT-WIDTH PCL-DEFAULT-SYMBOL-SET DEFAULT-VERTICAL-BLACK-RESOLUTION DEFAULT-HORIZONTAL-BLACK-RESOLUTION DEFAULT-PDL CONTEXT-SENSITIVE-PDL-SELECTION ENERGY-STAR IO-TIMEOUT DEFAULT-PAGE-PROTECT POSTSCRIPT-JAM-RECOVERY (PostScript installed) POSTSCRIPT-PRINT-ERRORS (PostScript installed)" ::= { status-system 12 }
user-nvram-reset OBJECT-TYPE SYNTAX INTEGER { eTrue(1) } ACCESS write-only STATUS optional DESCRIPTION "Setting to eTrue causes all user NVRAM settings to factory default settings. May also perform POWER-ON- RESET functionality thus loosing print job data. The POS will list which objects are effected by a user NVRAM reset. Some items are NVRAM settings, but not user controllable, so this action may not cause all of NVRAM to be reset. Some examples of NVRAM settings that may not be affected are page count, internally used pen information, line configuration information, etc. Additional information: Setting to eTrue returns the NVRAM items listed below to their factory default values. Performs the same function as the 'MENU RESET' function supported by the control panel except when printer is in Offline state, setting this OID to eTrue will not take the printer to the Online state. DEFAULT-COPIES DEFAULT-MEDIA-SIZE DEFAULT-ORIENTATION DEFAULT-LINES-PER-PAGE DEFAULT-MANUAL-FEED DEFAULT-RET DEFAULT-PRINT-QUALITY PCL-DEFAULT-FONT-SOURCE PCL-DEFAULT-FONT-NUMBER PCL-DEFAULT-FONT-HEIGHT PCL-DEFAULT-FONT-WIDTH PCL-DEFAULT-SYMBOL-SET DEFAULT-VERTICAL-BLACK-RESOLUTION DEFAULT-HORIZONTAL-BLACK-RESOLUTION DEFAULT-PDL CONTEXT-SENSITIVE-PDL-SELECTION ENERGY-STAR IO-TIMEOUT DEFAULT-PAGE-PROTECT POSTSCRIPT-JAM-RECOVERY (PostScript installed) POSTSCRIPT-PRINT-ERRORS (PostScript installed)" ::= { status-system 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.1 | localization-language | 0 | 0 | Localization language used by the device for device generated PML strings, control panel messages, and text contained in any of t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.2 | not-ready-printer | 0 | 0 | Indicates if any of the sub-systems in the printer are not ready. A sub-system is not ready if the sub-system is unable to perfo… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.3 | not-ready-controller | 0 | 0 | Indicates if the hardware controller sub-system in the device is not ready. If there are no items in the collection (i.e. no bit… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.4 | not-idle | 0 | 0 | Indicates if any of the sub-systems in the device are not idle. The I/O source sub-system is considered not idle if there is unp… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.5 | on-off-line | 0 | 0 | To bring the PDL processing sub-system on or off line. If the device is a printer, then the printer does not process print job da… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.6 | continue | 0 | 0 | A device can support a class of errors called continuable errors. When a continuable error is encountered, the device requires a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.7 | auto-continue | 0 | 0 | Indicates if the device will automatically continue after encountering a continuable error. If AUTO- CONTINUE is set to eOn, the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.8 | install-date | 0 | 0 | Identifies the date that the device was installed. The format of the string is 'YYYYMMDDHHmmZ'. Where: YYYY is the year. MM is the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.10 | perm-store-init-occurred | 0 | 0 | This object will set the cAllPermDevices bit when a full perm storage initialization occurs (as would be the case for a brand new… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.17 | date-and-time, localization-language | 0 | 0 | A C structure containing the following fields: typedef struct { ubyte yr; /* year: 0 to 99 */ ubyte mon; /* month: 1 to 12 */ ubyte… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.19 | service-id | 0 | 0 | A read of this object will return the current SERVICE ID value in the printer. The format is 'YYDDD' where: YY = calendar year - … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20 | display | 2 | 7 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.21 | total-ram-size | 0 | 0 | Identifies total amount of RAM, in bytes, available to the controller for general computing. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.22 | status-printer | 0 | 0 | Indicates if any of the sub-systems in the device in a warning condition. A warning condition exists if the sub-system is useabl… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.23 | status-controller, status-controller2 | 0 | 0 | Indicates if the hardware controller sub-system in a warning condition. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.28 | time-display, not-ready-printer | 0 | 0 | Controls front-panel time display format. Set to eTimeDisplayTwelveHour for AM/PM display. Set to eTimeDisplayTwentyFourHour fo… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.35 | job-input-auto-continue-timeout | 0 | 0 | The number of seconds the device waits after a job related continuable error occurs before automatically continuing. An example … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.36 | job-input-auto-continue-mode | 0 | 0 | Returns or sets the device behavior when the desired media is not currently available. cCancelJob - The device cancels the job. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37 | background-message | 4 | 8 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.38 | error-log-clear, not-ready-controller | 0 | 0 | Setting this object clears all the entries in the error log sub-tree. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.40 | job-output-auto-continue-timeout, not-idle | 0 | 0 | Returns or sets the time that the printer will wait after an output bin becomes full and the printer is trying to deliver a sheet… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.42 | collated-originals-support | 0 | 0 | Indicates that the printer can create multiple, collated 'originals' of a job and shows the level of support for this capability.… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.43 | device-cfg-download-error | 0 | 0 | Error status of the configuration download session. POS should indicate the actual error values reserving value 0 as NO ERROR. Ad… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.45 | device-cfg-upload-error | 0 | 0 | Error status of the configuration upload session. POS should indicate the actual error values reserving value 0 as NO ERROR. Addi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.52 | localization-languages-supported, on-off-line | 0 | 0 | The list of languages supported by the device. The languages are primarily, but not limited to, two character codes from ISO 639,… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.53 | localization-countries-supported | 0 | 0 | The list of countries supported by the device. The countries are primarily, but not limited to, two character codes from ISO 3166… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.59 | host-application-available-memory | 0 | 0 | Returns the amount of memory, in bytes, that the device has available for job-related processing or resources. Also known as driv… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.60 | control-panel-button-press | 0 | 0 | Writing this object simulates pressing a button on the control panel. Reading it will return the last key pressed either on the c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.63 | control-panel-display-contents-change-counter | 0 | 0 | A counter which increments whenever the contents of the front panel display changes. This object is implemented as a 32-bit signe… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.64 | control-panel-display-contents-crc | 0 | 0 | Reading this object returns a 32-bit Cyclical Redundancy Check (CRC) which represents the current contents of the display. Additi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.65 | control-panel-display | 1 | 1 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.99 | rtc-time-zone, cancel-active-dry-time | 0 | 0 | A device may normally delay placing a sheet in the output binuntil a certain amount of time has passed (the time is commonlyref… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.100 | automatic-daylight-savings | 0 | 0 | Determines whether or not the automatic adjustment for daylightsavings time is enabled. If it's enabled the device local timewi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.101 | daylight-savings-start | 0 | 0 | A C structure containing the following fields: \\typedef struct { \\ubyte hour; /* hour: 0 to 23 */ \\ubyte weekday; /* weekday… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.102 | daylight-savings-end | 0 | 0 | A C structure containing the following fields: \\typedef struct { \\ubyte hour; /* hour: 0 to 23 */ \\ubyte weekday; /* weekday… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.103 | daylight-savings-offset | 0 | 0 | Controls the offset in minutes to be added to the time when DSTis in effect. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.104 | daylight-savings-reset | 0 | 0 | This object is used to reset (set back to factory default forthe current time zone) or read the current status of the DSTsettin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.105 | warning-log-clear | 0 | 0 | Setting this object clears all the entries in the warning logsub-tree. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.116 | dfa-data-in-nvram | 0 | 0 | This object will act as a Read/Write area for HP print application to facilitate the new Design for Attach Data and Product Warra… |