Indicates that the printer can create multiple, collated
'originals' of a job and shows the level of support for
this capability.
cCollatedOriginals - The printer can create multiple
collated originals, or 'mopies'. This is the base
functionality required by the other collection items.
cProofAndHold - The printer saves a copy of the job
while printing the first mopy. Later, this held job can
be released and the rest of the mopies will print.
cSecurityPrint - The printer spools the job and holds
the job until the user releases the job by entering a
password at the printer's control panel.
cAutoHighlight - The printer prints the job a number
of times with a mail distribution list prepended to each
job. A different mailing address is highlighted on each
mopy.
cCollatedAtSpeed - The printer can create multiple
collated copies where all copies after the original are
printed at engine speed.
Additional information:
Indicates that the printer can create multiple,
collated 'originals' of a job and shows the level of support
for this capability.
cCollatedOriginals - The printer can create multiple
collated originals, or 'mopies'. This is the base
functionality required by the other collection items.
This is the base functionality required by the other collection
items.
Parsed from file lj3200_snmp.mib.txt
Company: None
Module: LJ3200-MIB
Indicates that the printer can create multiple, collated
'originals' of a job and shows the level of support for
this capability.
cCollatedOriginals - The printer can create multiple
collated originals, or 'mopies'. This is the base
functionality required by the other collection items.
cProofAndHold - The printer saves a copy of the job
while printing the first mopy. Later, this held job can
be released and the rest of the mopies will print.
cSecurityPrint - The printer spools the job and holds
the job until the user releases the job by entering a
password at the printer's control panel.
cAutoHighlight - The printer prints the job a number
of times with a mail distribution list prepended to each
job. A different mailing address is highlighted on each
mopy.
cCollatedAtSpeed - The printer can create multiple
collated copies where all copies after the original are
printed at engine speed.
Additional information:
Indicates that the printer can create multiple, collated
originals of a job and shows the level of support for this
capability.
cCollatedOriginals - The printer can create multiple collated
originals, or mopies.
This is the base functionality required by the other
collection items. None of them are supported by Jonah.
Without disk, this object will not exist. This will be set at
boot-up initialization. If the disk fails, in any way, then
the disk error functionality will handle the situation.
The value of this object will be:
!cCollatedOriginals - Only FLASH installed
cCollatedOriginals - IDE is installed combined
with/without FLASH
cCollatedOriginals - RAMDISK is On combined with/without FLASH
Parsed from file LaserJet-Series8000-MIB.mib
Module: LaserJet-Series8000-MIB
Vendor: Hewlett-Packard
Module: CLJ8500-MIB
[Automatically extracted from oidview.com]
collated-originals-support OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "Indicates that the printer can create multiple, collated 'originals' of a job and shows the level of support for this capability. cCollatedOriginals - The printer can create multiple collated originals, or 'mopies'. This is the base functionality required by the other collection items. cProofAndHold - The printer saves a copy of the job while printing the first mopy. Later, this held job can be released and the rest of the mopies will print. cSecurityPrint - The printer spools the job and holds the job until the user releases the job by entering a password at the printer's control panel. cAutoHighlight - The printer prints the job a number of times with a mail distribution list prepended to each job. A different mailing address is highlighted on each mopy. cCollatedAtSpeed - The printer can create multiple collated copies where all copies after the original are printed at engine speed. Additional information: Indicates that the printer can create multiple, collated 'originals' of a job and shows the level of support for this capability. cCollatedOriginals - The printer can create multiple collated originals, or 'mopies'. This is the base functionality required by the other collection items. This is the base functionality required by the other collection items." ::= { status-system 42 }
collated-originals-support OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "Indicates that the printer can create multiple, collated 'originals' of a job and shows the level of support for this capability. cCollatedOriginals - The printer can create multiple collated originals, or 'mopies'. This is the base functionality required by the other collection items. cProofAndHold - The printer saves a copy of the job while printing the first mopy. Later, this held job can be released and the rest of the mopies will print. cSecurityPrint - The printer spools the job and holds the job until the user releases the job by entering a password at the printer's control panel. cAutoHighlight - The printer prints the job a number of times with a mail distribution list prepended to each job. A different mailing address is highlighted on each mopy. cCollatedAtSpeed - The printer can create multiple collated copies where all copies after the original are printed at engine speed. Additional information: Indicates that the printer can create multiple, collated originals of a job and shows the level of support for this capability. cCollatedOriginals - The printer can create multiple collated originals, or mopies. This is the base functionality required by the other collection items. None of them are supported by Jonah. Without disk, this object will not exist. This will be set at boot-up initialization. If the disk fails, in any way, then the disk error functionality will handle the situation. The value of this object will be: !cCollatedOriginals - Only FLASH installed cCollatedOriginals - IDE is installed combined with/without FLASH cCollatedOriginals - RAMDISK is On combined with/without FLASH" ::= { status-system 42 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.1 | localization-language | 0 | 0 | Localization language used by the device for device generated PML strings, control panel messages, and text contained in any of t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.2 | not-ready-printer | 0 | 0 | Indicates if any of the sub-systems in the printer are not ready. A sub-system is not ready if the sub-system is unable to perfo… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.3 | not-ready-controller | 0 | 0 | Indicates if the hardware controller sub-system in the device is not ready. If there are no items in the collection (i.e. no bit… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.4 | not-idle | 0 | 0 | Indicates if any of the sub-systems in the device are not idle. The I/O source sub-system is considered not idle if there is unp… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.5 | on-off-line | 0 | 0 | To bring the PDL processing sub-system on or off line. If the device is a printer, then the printer does not process print job da… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.6 | continue | 0 | 0 | A device can support a class of errors called continuable errors. When a continuable error is encountered, the device requires a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.7 | auto-continue | 0 | 0 | Indicates if the device will automatically continue after encountering a continuable error. If AUTO- CONTINUE is set to eOn, the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.8 | install-date | 0 | 0 | Identifies the date that the device was installed. The format of the string is 'YYYYMMDDHHmmZ'. Where: YYYY is the year. MM is the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.10 | perm-store-init-occurred | 0 | 0 | This object will set the cAllPermDevices bit when a full perm storage initialization occurs (as would be the case for a brand new… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.12 | user-nvram-reset | 0 | 0 | Setting to eTrue causes all user NVRAM settings to factory default settings. May also perform POWER-ON- RESET functionality thus… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.17 | date-and-time, localization-language | 0 | 0 | A C structure containing the following fields: typedef struct { ubyte yr; /* year: 0 to 99 */ ubyte mon; /* month: 1 to 12 */ ubyte… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.19 | service-id | 0 | 0 | A read of this object will return the current SERVICE ID value in the printer. The format is 'YYDDD' where: YY = calendar year - … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20 | display | 2 | 7 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.21 | total-ram-size | 0 | 0 | Identifies total amount of RAM, in bytes, available to the controller for general computing. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.22 | status-printer | 0 | 0 | Indicates if any of the sub-systems in the device in a warning condition. A warning condition exists if the sub-system is useabl… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.23 | status-controller, status-controller2 | 0 | 0 | Indicates if the hardware controller sub-system in a warning condition. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.28 | time-display, not-ready-printer | 0 | 0 | Controls front-panel time display format. Set to eTimeDisplayTwelveHour for AM/PM display. Set to eTimeDisplayTwentyFourHour fo… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.35 | job-input-auto-continue-timeout | 0 | 0 | The number of seconds the device waits after a job related continuable error occurs before automatically continuing. An example … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.36 | job-input-auto-continue-mode | 0 | 0 | Returns or sets the device behavior when the desired media is not currently available. cCancelJob - The device cancels the job. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37 | background-message | 4 | 8 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.38 | error-log-clear, not-ready-controller | 0 | 0 | Setting this object clears all the entries in the error log sub-tree. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.40 | job-output-auto-continue-timeout, not-idle | 0 | 0 | Returns or sets the time that the printer will wait after an output bin becomes full and the printer is trying to deliver a sheet… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.43 | device-cfg-download-error | 0 | 0 | Error status of the configuration download session. POS should indicate the actual error values reserving value 0 as NO ERROR. Ad… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.45 | device-cfg-upload-error | 0 | 0 | Error status of the configuration upload session. POS should indicate the actual error values reserving value 0 as NO ERROR. Addi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.52 | localization-languages-supported, on-off-line | 0 | 0 | The list of languages supported by the device. The languages are primarily, but not limited to, two character codes from ISO 639,… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.53 | localization-countries-supported | 0 | 0 | The list of countries supported by the device. The countries are primarily, but not limited to, two character codes from ISO 3166… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.59 | host-application-available-memory | 0 | 0 | Returns the amount of memory, in bytes, that the device has available for job-related processing or resources. Also known as driv… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.60 | control-panel-button-press | 0 | 0 | Writing this object simulates pressing a button on the control panel. Reading it will return the last key pressed either on the c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.63 | control-panel-display-contents-change-counter | 0 | 0 | A counter which increments whenever the contents of the front panel display changes. This object is implemented as a 32-bit signe… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.64 | control-panel-display-contents-crc | 0 | 0 | Reading this object returns a 32-bit Cyclical Redundancy Check (CRC) which represents the current contents of the display. Additi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.65 | control-panel-display | 1 | 1 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.99 | rtc-time-zone, cancel-active-dry-time | 0 | 0 | A device may normally delay placing a sheet in the output binuntil a certain amount of time has passed (the time is commonlyref… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.100 | automatic-daylight-savings | 0 | 0 | Determines whether or not the automatic adjustment for daylightsavings time is enabled. If it's enabled the device local timewi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.101 | daylight-savings-start | 0 | 0 | A C structure containing the following fields: \\typedef struct { \\ubyte hour; /* hour: 0 to 23 */ \\ubyte weekday; /* weekday… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.102 | daylight-savings-end | 0 | 0 | A C structure containing the following fields: \\typedef struct { \\ubyte hour; /* hour: 0 to 23 */ \\ubyte weekday; /* weekday… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.103 | daylight-savings-offset | 0 | 0 | Controls the offset in minutes to be added to the time when DSTis in effect. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.104 | daylight-savings-reset | 0 | 0 | This object is used to reset (set back to factory default forthe current time zone) or read the current status of the DSTsettin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.105 | warning-log-clear | 0 | 0 | Setting this object clears all the entries in the warning logsub-tree. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.116 | dfa-data-in-nvram | 0 | 0 | This object will act as a Read/Write area for HP print application to facilitate the new Design for Attach Data and Product Warra… |