The current capacity of the input sub-unit in input
sub-unit capacity units (PrtCapacityUnitTC). If this input
sub-unit can reliably sense this value, the value is
sensed by the printer and may not be changed by
management requests; otherwise, the value may
be written (by a Remote Contol Panel or a
Management Application). The value (-1) means other and
specifically indicates that the sub-unit places no
restrictions on this parameter. The value (-2) means unknown.
The value (-3) means that the printer knows that at least one
unit remains.
Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details.
Additional information:
The fourpak products can only detect
empty/not empty in its trays. It returns -3 for not empty
and -2 (unknown) for any other condition (e.g. tray is empty
or tray is removed).
Parsed from file lj3200_snmp.mib.txt
Company: None
Module: LJ3200-MIB
The current capacity of the input sub-unit in input
sub-unit capacity units (CapacityUnit). If this input
sub-unit can reliably sense this value, the value is
sensed by the printer and may not be changed by
management requests; otherwise, the value may
be written (by a Remote Contol Panel or a
Management Application). The value (-1) means other and
specifically indicates that the sub-unit places no
restrictions on this parameter. The value (-2) means unknown.
The value (-3) means that the printer knows that at least one
unit remains.
Additional information:
For trays 1 and 4, LaserJet 5Si can only detect empty/not
empty trays. It returns -3 for not empty and 0 for
empty.
For trays 2 and 3, LaserJet 5Si can detect approximately the amount of media. The
value returned is based on the amount detected as follows:
0 - empty
1 - 1-110 sheets
50 - 50-260 sheets
200 - 200-490 sheets
430 - 430 sheets or more
For tray 5, LaserJet 5Si can detect approximately the amount of media. The
value returned is based on the amount detected as follows:
0 - empty
1 - 1 sheet to 25% of capacity
500 - 26% to 50% of capacity
1000 - 51% to 75% of capacity
1500 - 76% to 100% of capacity
If the tray drawer is open, a value of -2 (unknown) will be returned.
Parsed from file LaserJet5Si-MIB.mib
Module: LaserJet5Si-MIB
Vendor: Hewlett-Packard
Module: CLJ8500-MIB
[Automatically extracted from oidview.com]
prtinputcurrentlevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The current capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). If this input sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests; otherwise, the value may be written (by a Remote Contol Panel or a Management Application). The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter. The value (-2) means unknown. The value (-3) means that the printer knows that at least one unit remains. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional information: The fourpak products can only detect empty/not empty in its trays. It returns -3 for not empty and -2 (unknown) for any other condition (e.g. tray is empty or tray is removed)." ::= { prtInputEntry 10 }
prtinputcurrentlevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The current capacity of the input sub-unit in input sub-unit capacity units (CapacityUnit). If this input sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests; otherwise, the value may be written (by a Remote Contol Panel or a Management Application). The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter. The value (-2) means unknown. The value (-3) means that the printer knows that at least one unit remains. Additional information: For trays 1 and 4, LaserJet 5Si can only detect empty/not empty trays. It returns -3 for not empty and 0 for empty. For trays 2 and 3, LaserJet 5Si can detect approximately the amount of media. The value returned is based on the amount detected as follows: 0 - empty 1 - 1-110 sheets 50 - 50-260 sheets 200 - 200-490 sheets 430 - 430 sheets or more For tray 5, LaserJet 5Si can detect approximately the amount of media. The value returned is based on the amount detected as follows: 0 - empty 1 - 1 sheet to 25% of capacity 500 - 26% to 50% of capacity 1000 - 51% to 75% of capacity 1500 - 76% to 100% of capacity If the tray drawer is open, a value of -2 (unknown) will be returned." ::= { prtInputEntry 10 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.10.0 | prtinputcurrentlevel | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.2 | prtinputtype | 1 | 1 | The type of technology (discriminated primarily according to feeder mechanism type) employed by the input sub-unit. Note, the Op… |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.3 | prtinputdimunit | 1 | 1 | The unit of measurement for use calculating and relaying dimensional values for this input sub-unit. |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.4 | prtinputmediadimfeeddirdeclared | 1 | 1 | This object provides the value of the declared dimension, in the feed direction, of the media that is (or, if empty, was or will … |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.5 | prtinputmediadimxfeeddirdeclared | 1 | 1 | This object provides the value of the declared dimension, in the cross feed direction, of the media that is (or, if empty, was or… |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.6 | prtinputmediadimfeeddirchosen | 1 | 1 | The printer will act as if media of the chosen dimension (in the feed direction) is present in this input source. Note that this… |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.7 | prtinputmediadimxfeeddirchosen | 1 | 1 | The printer will act as if media of the chosen dimension (in the cross feed direction) is present in this input source. Note that… |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.8 | prtinputcapacityunit | 1 | 1 | The unit of measurement for use in calculating and relaying capacity values for this input sub-unit. Additional information: A she… |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.9 | prtinputmaxcapacity | 1 | 1 | The maximum capacity of the input sub-unit in input sub-unit capacity units (CapacityUnit). There is no convention associated wi… |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.11 | prtinputstatus | 1 | 1 | The current status of this input sub-unit. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional … |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.12 | prtinputmedianame | 1 | 1 | A description of the media contained in this input sub-unit; This description is intended for display to a human operator. This d… |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.13 | prtinputname | 1 | 1 | The name assigned to this input sub-unit. |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.14 | prtinputvendorname | 1 | 1 | The vendor name of this input sub-unit. |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.15 | prtinputmodel | 1 | 1 | The model name of this input sub-unit. |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.16 | prtinputversion | 1 | 1 | The version of this input sub-unit. |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.17 | prtinputserialnumber | 1 | 1 | The serial number assigned to this input sub-unit. |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.18 | prtinputdescription | 1 | 1 | A free-form text description of this input sub-unit in the localization specified by prtGeneralCurrentLocalization. |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.19 | prtinputsecurity | 1 | 1 | Indicates if this input sub-unit has some security associated with it. Additional information: No security mechanism provided. |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.24 | prtinputmedialoadtimeout | 1 | 1 | When the printer is not able to print due to a subunit being empty or the requested media must be manually loaded, the printer wi… |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.26 | prtinputnextindex | 1 | 1 | The value of prtInputIndex corresponding to the input subunit which will be used when this input subunit is emptied and the timeo… |