When the printer is not able to print due to a subunit
being empty or the requested media must be manually loaded, the
printer will wait for the duration (in seconds) specified by this
object. Upon expiration of the timeout, the printer will take the
action specified by prtInputNextIndex.
The event which causes the printer to enter the waiting state is
product specific. If the printer is not waiting for manually fed
media, it may switch from an empty subunit to a different subunit
without waiting for the timeout to expire.
A value of (-1) implies 'other' or 'infinite' which translates to
'wait forever'. The action which causes printing to continue is
product specific. A value of (-2) implies 'unknown'.
Additional information:
This object simply reflects the value of the
JOB-INPUT-AUTO-CONTINUE-TIMEOUT object. See the description of that object
for additional information.
Parsed from file lj4100mfp_beta.mib.txt
Company: None
Module: LJ4100mfp-MIB
When the printer is not able to print due to a subunit
being empty or the requested media must be manually loaded, the
printer will wait for the duration (in seconds) specified by this
object. Upon expiration of the timeout, the printer will take the
action specified by prtInputNextIndex.
The event which causes the printer to enter the waiting state is
product specific. If the printer is not waiting for manually fed
media, it may switch from an empty subunit to a different subunit
without waiting for the timeout to expire.
A value of (-1) implies 'other' or 'infinite' which translates to
'wait forever'. The action which causes printing to continue is
product specific. A value of (-2) implies 'unknown'.
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
Additional information:
This object simply reflects the value of the
JOB-INPUT-AUTO-CONTINUE-TIMEOUT object. See the
description of that object for additional information.
Parsed from file LaserJet-Series8000-MIB.mib
Module: LaserJet-Series8000-MIB
Vendor: Hewlett-Packard
Module: HP-Color-LaserJet-4500-MIB
[Automatically extracted from oidview.com]
prtinputmedialoadtimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "When the printer is not able to print due to a subunit being empty or the requested media must be manually loaded, the printer will wait for the duration (in seconds) specified by this object. Upon expiration of the timeout, the printer will take the action specified by prtInputNextIndex. The event which causes the printer to enter the waiting state is product specific. If the printer is not waiting for manually fed media, it may switch from an empty subunit to a different subunit without waiting for the timeout to expire. A value of (-1) implies 'other' or 'infinite' which translates to 'wait forever'. The action which causes printing to continue is product specific. A value of (-2) implies 'unknown'. Additional information: This object simply reflects the value of the JOB-INPUT-AUTO-CONTINUE-TIMEOUT object. See the description of that object for additional information." ::= { prtInputEntry 24 }
prtinputmedialoadtimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "When the printer is not able to print due to a subunit being empty or the requested media must be manually loaded, the printer will wait for the duration (in seconds) specified by this object. Upon expiration of the timeout, the printer will take the action specified by prtInputNextIndex. The event which causes the printer to enter the waiting state is product specific. If the printer is not waiting for manually fed media, it may switch from an empty subunit to a different subunit without waiting for the timeout to expire. A value of (-1) implies 'other' or 'infinite' which translates to 'wait forever'. The action which causes printing to continue is product specific. A value of (-2) implies 'unknown'. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: This object simply reflects the value of the JOB-INPUT-AUTO-CONTINUE-TIMEOUT object. See the description of that object for additional information." ::= { prtInputEntry 24 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.24.0 | prtinputmedialoadtimeout | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.2 | prtinputtype | 1 | 1 | The type of technology (discriminated primarily according to feeder mechanism type) employed by the input sub-unit. Note, the Op… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.3 | prtinputdimunit | 1 | 1 | The unit of measurement for use calculating and relaying dimensional values for this input sub-unit. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.4 | prtinputmediadimfeeddirdeclared | 1 | 1 | This object provides the value of the declared dimension, in the feed direction, of the media that is (or, if empty, was or will … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.5 | prtinputmediadimxfeeddirdeclared | 1 | 1 | This object provides the value of the declared dimension, in the cross feed direction, of the media that is (or, if empty, was or… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.6 | prtinputmediadimfeeddirchosen | 1 | 1 | The printer will act as if media of the chosen dimension (in the feed direction) is present in this input source. Note that this… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.7 | prtinputmediadimxfeeddirchosen | 1 | 1 | The printer will act as if media of the chosen dimension (in the cross feed direction) is present in this input source. Note that… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.8 | prtinputcapacityunit | 1 | 1 | The unit of measurement for use in calculating and relaying capacity values for this input sub-unit. Additional information: A she… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.9 | prtinputmaxcapacity | 1 | 1 | The maximum capacity of the input sub-unit in input sub-unit capacity units (CapacityUnit). There is no convention associated wi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.10 | prtinputcurrentlevel | 1 | 1 | The current capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). If this input sub-unit can relia… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.11 | prtinputstatus | 1 | 1 | The current status of this input sub-unit. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.12 | prtinputmedianame | 1 | 1 | A description of the media contained in this input sub-unit; This description is intended for display to a human operator. This d… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.13 | prtinputname | 1 | 1 | The name assigned to this input sub-unit. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.14 | prtinputvendorname | 1 | 1 | The vendor name of this input sub-unit. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.15 | prtinputmodel | 1 | 1 | The model name of this input sub-unit. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.16 | prtinputversion | 1 | 1 | The version of this input sub-unit. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.17 | prtinputserialnumber | 1 | 1 | The serial number assigned to this input sub-unit. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.18 | prtinputdescription | 1 | 1 | A free-form text description of this input sub-unit in the localization specified by prtGeneralCurrentLocalization. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.19 | prtinputsecurity | 1 | 1 | Indicates if this input sub-unit has some security associated with it. Additional information: No security mechanism provided. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.26 | prtinputnextindex | 1 | 1 | The value of prtInputIndex corresponding to the input subunit which will be used when this input subunit is emptied and the timeo… |