The type of technology (discriminated primarily according to
feeder mechanism type) employed by the input sub-unit. Note,
the Optional Input Class provides for a descriptor field to
further qualify the other choice.
Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details.
Additional information:
Tray 1 is the multi-purpose tray and is always
present. It supports both sheets and envelopes. Its type is
ePsheetFeedAutoNonRemovableTray.
Parsed from file lj3200_snmp.mib.txt
Company: None
Module: LJ3200-MIB
The type of technology (discriminated primarily according to
feeder mechanism type) employed by the input sub-unit. Note,
the Optional Input Class provides for a descriptor field to
further qualify the other choice.
Additional information:
Tray 1 is the right side tray and is always present.
Tray 1 can operate in manual feed mode but is
typically treated as a normal input source. Therefore,
its type is ePsheetFeedAutoNonRemovableTray.
Trays 2 and 3 are the drawers and, although they are
usually not removed from the printer, the printer
cannot distinguish the open and removed conditions.
Therefore, when they are open, they are considered to
be removed and, for this object, they are considered
to be of type ePsheetFeedAutoRemovableTray.
Tray 4 is the envelope feeder, which is removable at
any time.
Tray 5 is the high capacity input device. .
Parsed from file LaserJet5Si-MIB.mib
Module: LaserJet5Si-MIB
Vendor: Hewlett-Packard
Module: CLJ8500-MIB
[Automatically extracted from oidview.com]
prtinputtype OBJECT-TYPE SYNTAX INTEGER { ePsheetFeedAutoRemovableTray(3), ePsheetFeedAutoNonRemovableTray(4) } ACCESS read-only STATUS optional DESCRIPTION "The type of technology (discriminated primarily according to feeder mechanism type) employed by the input sub-unit. Note, the Optional Input Class provides for a descriptor field to further qualify the other choice. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional information: Tray 1 is the multi-purpose tray and is always present. It supports both sheets and envelopes. Its type is ePsheetFeedAutoNonRemovableTray." ::= { prtInputEntry 2 }
prtinputtype OBJECT-TYPE SYNTAX INTEGER { ePother(1), ePunknown(2), ePsheetFeedAutoRemovableTray(3), ePsheetFeedAutoNonRemovableTray(4), ePsheetFeedManual(5), ePcontinuousRoll(6), ePcontinuousFanFold(7) } ACCESS read-only STATUS optional DESCRIPTION "The type of technology (discriminated primarily according to feeder mechanism type) employed by the input sub-unit. Note, the Optional Input Class provides for a descriptor field to further qualify the other choice. Additional information: Tray 1 is the right side tray and is always present. Tray 1 can operate in manual feed mode but is typically treated as a normal input source. Therefore, its type is ePsheetFeedAutoNonRemovableTray. Trays 2 and 3 are the drawers and, although they are usually not removed from the printer, the printer cannot distinguish the open and removed conditions. Therefore, when they are open, they are considered to be removed and, for this object, they are considered to be of type ePsheetFeedAutoRemovableTray. Tray 4 is the envelope feeder, which is removable at any time. Tray 5 is the high capacity input device. ." ::= { prtInputEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.2.0 | prtinputtype | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.3 | prtinputdimunit | 1 | 1 | The unit of measurement for use calculating and relaying dimensional values for this input sub-unit. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.4 | prtinputmediadimfeeddirdeclared | 1 | 1 | This object provides the value of the declared dimension, in the feed direction, of the media that is (or, if empty, was or will … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.5 | prtinputmediadimxfeeddirdeclared | 1 | 1 | This object provides the value of the declared dimension, in the cross feed direction, of the media that is (or, if empty, was or… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.6 | prtinputmediadimfeeddirchosen | 1 | 1 | The printer will act as if media of the chosen dimension (in the feed direction) is present in this input source. Note that this… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.7 | prtinputmediadimxfeeddirchosen | 1 | 1 | The printer will act as if media of the chosen dimension (in the cross feed direction) is present in this input source. Note that… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.8 | prtinputcapacityunit | 1 | 1 | The unit of measurement for use in calculating and relaying capacity values for this input sub-unit. Additional information: A she… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.9 | prtinputmaxcapacity | 1 | 1 | The maximum capacity of the input sub-unit in input sub-unit capacity units (CapacityUnit). There is no convention associated wi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.10 | prtinputcurrentlevel | 1 | 1 | The current capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). If this input sub-unit can relia… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.11 | prtinputstatus | 1 | 1 | The current status of this input sub-unit. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.12 | prtinputmedianame | 1 | 1 | A description of the media contained in this input sub-unit; This description is intended for display to a human operator. This d… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.13 | prtinputname | 1 | 1 | The name assigned to this input sub-unit. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.14 | prtinputvendorname | 1 | 1 | The vendor name of this input sub-unit. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.15 | prtinputmodel | 1 | 1 | The model name of this input sub-unit. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.16 | prtinputversion | 1 | 1 | The version of this input sub-unit. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.17 | prtinputserialnumber | 1 | 1 | The serial number assigned to this input sub-unit. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.18 | prtinputdescription | 1 | 1 | A free-form text description of this input sub-unit in the localization specified by prtGeneralCurrentLocalization. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.19 | prtinputsecurity | 1 | 1 | Indicates if this input sub-unit has some security associated with it. Additional information: No security mechanism provided. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.24 | prtinputmedialoadtimeout | 1 | 1 | When the printer is not able to print due to a subunit being empty or the requested media must be manually loaded, the printer wi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.26 | prtinputnextindex | 1 | 1 | The value of prtInputIndex corresponding to the input subunit which will be used when this input subunit is emptied and the timeo… |