The threshold at which an over current warning is activated. If
the measured current (lgpPduPsLineEntryEc) is equal to or over
this percentage of the full scale rated value
(lgpPduPsEntryEcInputRated), an over current warning
is activated.
Parsed from file LIEBERT_GP_PDU.MIB.txt
Company: liebert
Module: LIEBERT-GP-PDU-MIB
Vendor: Liebert
Module: LIEBERT-GP-PDU-MIB (LIEBERT_GP_PDU.MIB)
Type: TABULAR
Access: read-write
Syntax: Unsigned32
Automatically extracted from www.mibdepot.com
lgpPduPsLineEntryEcThrshldOvrWarn OBJECT-TYPE SYNTAX Unsigned32 UNITS "Percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold at which an over current warning is activated. If the measured current (lgpPduPsLineEntryEc) is equal to or over this percentage of the full scale rated value (lgpPduPsEntryEcInputRated), an over current warning is activated." ::= { lgpPduPsLineEntry 36 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.476.1.42.3.8.30.40.1.5 | lgpPduPsLineEntryIndex | 0 | 0 | This is the index that indicates the line/phase of the measurements in the given row of the 'lgpPduPsLineTable'. |
| 1.3.6.1.4.1.476.1.42.3.8.30.40.1.10 | lgpPduPsLineEntryId | 0 | 0 | Unique identifier (within a PDU) for the PDU's power source. The object may not be available in non-modular systems. |
| 1.3.6.1.4.1.476.1.42.3.8.30.40.1.15 | lgpPduPsLineEntryLine | 0 | 0 | The line number (phase) that the measurement represents for all measurements in a given row of the table. Note that this always… |
| 1.3.6.1.4.1.476.1.42.3.8.30.40.1.19 | lgpPduPsLineEntryEpLNTenths | 0 | 0 | Alternating Current RMS Line to Neutral Electrical Potential measurement. The line/phase being measured is indicated by the corre… |
| 1.3.6.1.4.1.476.1.42.3.8.30.40.1.20 | lgpPduPsLineEntryEpLN | 0 | 0 | Alternating Current RMS Line to Neutral Electrical Potential measurement. The line/phase being measured is indicated by the corre… |
| 1.3.6.1.4.1.476.1.42.3.8.30.40.1.21 | lgpPduPsLineEntryEc | 0 | 0 | Total input line-to-neutral electrical current. The line/phase being measured is indicated by the corresponding lgpPduPsLineEntry… |
| 1.3.6.1.4.1.476.1.42.3.8.30.40.1.22 | lgpPduPsLineEntryEcHundredths | 0 | 0 | Total input line-to-neutral electrical current. The line/phase being measured is indicated by the corresponding lgpPduPsLineEntry… |
| 1.3.6.1.4.1.476.1.42.3.8.30.40.1.35 | lgpPduPsLineEntryEcThrshldUndrAlarm | 0 | 0 | The threshold at which an under current alarm is activated. If the measured current (lgpPduPsLineEntryEc) is equal to or below t… |
| 1.3.6.1.4.1.476.1.42.3.8.30.40.1.37 | lgpPduPsLineEntryEcThrshldOvrAlarm | 0 | 0 | The threshold at which an over current alarm is activated. If the measured current (lgpPduPsLineEntryEc) is equal to or over thi… |
| 1.3.6.1.4.1.476.1.42.3.8.30.40.1.38 | lgpPduPsLineEntryEcAvailBeforeAlarm | 0 | 0 | The amount that the current/amperage may increase from its present value before an over current alarm occurs. |
| 1.3.6.1.4.1.476.1.42.3.8.30.40.1.39 | lgpPduPsLineEntryEcUsedBeforeAlarm | 0 | 0 | The percent of current utilization relative to the over current alarm threshold. |
| 1.3.6.1.4.1.476.1.42.3.8.30.40.1.60 | lgpPduPsLineEntryEpLL | 0 | 0 | Line to Line Electrical Potential. The line/phase being measured is indicated by the corresponding lgpPduPsLineEntryLine value of… |
| 1.3.6.1.4.1.476.1.42.3.8.30.40.1.61 | lgpPduPsLineEntryEpLLTenths | 0 | 0 | Line to Line Electrical Potential. The line/phase being measured is indicated by the corresponding lgpPduPsLineEntryLine value of… |
| 1.3.6.1.4.1.476.1.42.3.8.30.40.1.62 | lgpPduPsLineEntryEcAvailBeforeAlarmHundredths | 0 | 0 | The amount that the current/amperage may increase from its present value before an over current alarm occurs. |