The percent of current utilization relative to the over current
alarm threshold.
Parsed from file LIEBERT_GP_PDU.MIB.txt
Company: liebert
Module: LIEBERT-GP-PDU-MIB
Vendor: Liebert
Module: LIEBERT-GP-PDU-MIB (LIEBERT_GP_PDU.MIB)
Type: TABULAR
Access: read-only
Syntax: Unsigned32
Automatically extracted from www.mibdepot.com
lgpPduPsLineEntryEcUsedBeforeAlarm OBJECT-TYPE SYNTAX Unsigned32 UNITS "0.1 Percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The percent of current utilization relative to the over current alarm threshold." ::= { lgpPduPsLineEntry 39 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.476.1.42.3.8.30.40.1.5 | lgpPduPsLineEntryIndex | 0 | 0 | This is the index that indicates the line/phase of the measurements in the given row of the 'lgpPduPsLineTable'. |
1.3.6.1.4.1.476.1.42.3.8.30.40.1.10 | lgpPduPsLineEntryId | 0 | 0 | Unique identifier (within a PDU) for the PDU's power source. The object may not be available in non-modular systems. |
1.3.6.1.4.1.476.1.42.3.8.30.40.1.15 | lgpPduPsLineEntryLine | 0 | 0 | The line number (phase) that the measurement represents for all measurements in a given row of the table. Note that this always… |
1.3.6.1.4.1.476.1.42.3.8.30.40.1.19 | lgpPduPsLineEntryEpLNTenths | 0 | 0 | Alternating Current RMS Line to Neutral Electrical Potential measurement. The line/phase being measured is indicated by the corre… |
1.3.6.1.4.1.476.1.42.3.8.30.40.1.20 | lgpPduPsLineEntryEpLN | 0 | 0 | Alternating Current RMS Line to Neutral Electrical Potential measurement. The line/phase being measured is indicated by the corre… |
1.3.6.1.4.1.476.1.42.3.8.30.40.1.21 | lgpPduPsLineEntryEc | 0 | 0 | Total input line-to-neutral electrical current. The line/phase being measured is indicated by the corresponding lgpPduPsLineEntry… |
1.3.6.1.4.1.476.1.42.3.8.30.40.1.22 | lgpPduPsLineEntryEcHundredths | 0 | 0 | Total input line-to-neutral electrical current. The line/phase being measured is indicated by the corresponding lgpPduPsLineEntry… |
1.3.6.1.4.1.476.1.42.3.8.30.40.1.35 | lgpPduPsLineEntryEcThrshldUndrAlarm | 0 | 0 | The threshold at which an under current alarm is activated. If the measured current (lgpPduPsLineEntryEc) is equal to or below t… |
1.3.6.1.4.1.476.1.42.3.8.30.40.1.36 | lgpPduPsLineEntryEcThrshldOvrWarn | 0 | 0 | The threshold at which an over current warning is activated. If the measured current (lgpPduPsLineEntryEc) is equal to or over t… |
1.3.6.1.4.1.476.1.42.3.8.30.40.1.37 | lgpPduPsLineEntryEcThrshldOvrAlarm | 0 | 0 | The threshold at which an over current alarm is activated. If the measured current (lgpPduPsLineEntryEc) is equal to or over thi… |
1.3.6.1.4.1.476.1.42.3.8.30.40.1.38 | lgpPduPsLineEntryEcAvailBeforeAlarm | 0 | 0 | The amount that the current/amperage may increase from its present value before an over current alarm occurs. |
1.3.6.1.4.1.476.1.42.3.8.30.40.1.60 | lgpPduPsLineEntryEpLL | 0 | 0 | Line to Line Electrical Potential. The line/phase being measured is indicated by the corresponding lgpPduPsLineEntryLine value of… |
1.3.6.1.4.1.476.1.42.3.8.30.40.1.61 | lgpPduPsLineEntryEpLLTenths | 0 | 0 | Line to Line Electrical Potential. The line/phase being measured is indicated by the corresponding lgpPduPsLineEntryLine value of… |
1.3.6.1.4.1.476.1.42.3.8.30.40.1.62 | lgpPduPsLineEntryEcAvailBeforeAlarmHundredths | 0 | 0 | The amount that the current/amperage may increase from its present value before an over current alarm occurs. |