This attribute shows the amount by which the bandwidth has been
reduced for this connection. This value is non-zero only for
connections which have bandwidthElastic displayed as yes, and
which are also operating in a reduced bandwidth mode. This is
typically the case for selected connections running over an IMA
link. This attribute takes a value from 0 (no reduction) up to the
ECR. For all connections which are running at their full allocated
bandwidth, bwReduction has the value 0. Connections which have
been reduced in allocated bandwidth have a positive number for this
attribute. The bwReduction may be subtracted from the ECR (which
is displayed as txTrafficDescParm 5) to determine the actual
bandwidth allocated to this connection.
Parsed from file nortelPP-atmCoreV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-AtmCoreMIB
This attribute shows the amount by which the bandwidth has been
reduced for this connection. This value is non-zero only for
connections which have bandwidthElastic displayed as yes, and
which are also operating in a reduced bandwidth mode. This is
typically the case for selected connections running over an IMA
link. This attribute takes a value from 0 (no reduction) up to the
ECR. For all connections which are running at their full allocated
bandwidth, bwReduction has the value 0. Connections which have
been reduced in allocated bandwidth have a positive number for this
attribute. The bwReduction may be subtracted from the ECR (which
is displayed as txTrafficDescParm 5) to determine the actual
bandwidth allocated to this connection.
Parsed from file Nortel-Magellan-Passport-AtmCoreMIB.mib
Module: Nortel-Magellan-Passport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-AtmCoreMIB
[Automatically extracted from oidview.com]
atmIfVpcTmBandwidthReduction OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute shows the amount by which the bandwidth has been reduced for this connection. This value is non-zero only for connections which have bandwidthElastic displayed as yes, and which are also operating in a reduced bandwidth mode. This is typically the case for selected connections running over an IMA link. This attribute takes a value from 0 (no reduction) up to the ECR. For all connections which are running at their full allocated bandwidth, bwReduction has the value 0. Connections which have been reduced in allocated bandwidth have a positive number for this attribute. The bwReduction may be subtracted from the ECR (which is displayed as txTrafficDescParm 5) to determine the actual bandwidth allocated to this connection." ::= { atmIfVpcTmOperEntry 100 }
atmIfVpcTmBandwidthReduction OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute shows the amount by which the bandwidth has been reduced for this connection. This value is non-zero only for connections which have bandwidthElastic displayed as yes, and which are also operating in a reduced bandwidth mode. This is typically the case for selected connections running over an IMA link. This attribute takes a value from 0 (no reduction) up to the ECR. For all connections which are running at their full allocated bandwidth, bwReduction has the value 0. Connections which have been reduced in allocated bandwidth have a positive number for this attribute. The bwReduction may be subtracted from the ECR (which is displayed as txTrafficDescParm 5) to determine the actual bandwidth allocated to this connection." ::= { atmIfVpcTmOperEntry 100 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.10 | atmIfVpcTmTxTrafficDescType | 0 | 0 | T his attribute indicates the type of traffic management which is applied to the transmit direction of this connection as define… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.31 | atmIfVpcTmTxQosClass | 0 | 0 | This attribute indicates the quality of service for the calling to called direction for this connection. This is only applicable… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.32 | atmIfVpcTmTxQueueLength | 0 | 0 | This attribute indicates the current number of cells in the transmit queue for this connection. If this connection has unshapedT… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.33 | atmIfVpcTmTxQueueCongestionState | 0 | 0 | This attribute indicates the congestion state of the transmit queue for this connection. If this connection has unshapedTransmit… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.35 | atmIfVpcTmHoldingPriority | 0 | 0 | This attribute indicates the actual holding priority in effect for this connection. In a situation where the link bandwidth fluc… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.40 | atmIfVpcTmRxTrafficDescType | 0 | 0 | This attribute indicates the type of traffic management which is applied to the receive direction of this connection as defined … |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.61 | atmIfVpcTmRxQosClass | 0 | 0 | This attribute indicates the quality of service for the called to calling direction for this connection. This is only applicable… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.62 | atmIfVpcTmAtmServiceCategory | 0 | 0 | This attribute indicates the ATM service category used for traffic in both directions of the connection. This attribute does not… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.70 | atmIfVpcTmTrafficShaping | 0 | 0 | This attribute indicates the traffic shaping state of the connection. A value of notApplicable indicates that traffic shaping i… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.71 | atmIfVpcTmBearerClassBbc | 0 | 0 | This attribute indicates the bearer capability for this connection. Class a service is a connection-oriented, constant bit rate… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.72 | atmIfVpcTmTransferCapabilityBbc | 0 | 0 | This attribute indicates the transfer capability for this connection. Uni 3.0/3.1 traffic type and end-to-end timing parameters … |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.74 | atmIfVpcTmClippingBbc | 0 | 0 | This attribute indicates the value of the clipping susceptibility parameter in the broadband bearer capability (BBC) Information… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.75 | atmIfVpcTmUnshapedTransmitQueueing | 0 | 0 | This attribute indicates the unshaped transmit queuing state of the connection. A value of common indicates that transmit traffi… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.76 | atmIfVpcTmBestEffort | 0 | 0 | This attribute indicates value of best effort parameter in the ATM Traffic Descriptor Information Element. The value indicated i… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.78 | atmIfVpcTmForceTagging | 0 | 0 | This attribute indicates the state of force tagging option for this connection. Force tagging refers to setting the CLP bit for … |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.79 | atmIfVpcTmWeight | 0 | 0 | This attribute indicates the relative weight of this unshaped connection. Connections with a larger weight get a larger proporti… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.80 | atmIfVpcTmUsageParameterControl | 0 | 0 | This attribute indicates the UPC state of the connection. A value of notApplicable indicates that UPC is not applicable or not s… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.85 | atmIfVpcTmTxPacketWiseDiscard | 0 | 0 | This attribute indicates the current set of packet-wise discard functions in effect in the transmit data direction at this conne… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.86 | atmIfVpcTmRxPacketWiseDiscard | 0 | 0 | This attribute indicates the current set of packet-wise discard functions in effect in the receive data direction at this connec… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.90 | atmIfVpcTmBandwidthElastic | 0 | 0 | This attribute is only of importance for connections which are carried on a link with a variable bandwidth. For example, the band… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.110 | atmIfVpcTmAbrConnectionType | 0 | 0 | This attribute indicates the type of ABR behavior which is in effect at this connection. This attribute is only applicable if th… |