This attribute indicates the UPC state of the connection.
A value of notApplicable indicates that UPC is not applicable or not
supported for the connection. This is the case:
- when the connection's rxTrafficDescType is 1 or 2.
- for standard Vpt Vccs and basic Vpts.
A value of notApplicable is set regardless of whether UPC is
disabled or enabled in provisioning data.
A value of disabled indicates that UPC is applicable and supported
for the type of connection but has been turned off in the
provisioning data.
A value of enforced indicates that UPC is actively checking
conformance for the connection and is discarding or tagging cells
which do not conform to the connection traffic contract. The traffic
descriptor parameters used for UPC conformance are reflected in
the rxTrafficDescParms of the connection. On ATM IP cards, the
counts of UPC violations are visible in the Vcc, Vpc, or Vpt
rxUpcViolationsOnEnforcer1 or rxUpcViolationsOnEnforcer2
attributes.
ATM IP cards provide the ability to monitor UPC violations without
tagging or discarding. A value of monitored indicates that UPC is
actively checking conformance for the connection and counting the
violations, but is not discarding or tagging cells which do not
conform to the connection traffic contract. The traffic descriptor
parameters used for UPC conformance are reflected in the
rxTrafficDescParms of the connection. The counts of UPC
violations are visible in the Vcc, Vpc, or Vpt
rxUpcViolationsOnEnforcer1 or rxUpcViolationsOnEnforcer2
attributes. The value of monitored appears only on ATM IP cards.
If the atmServiceCategory for this connection indicates
availableBitRate, a value of abrEnforced indicates that Dynamic
Generic Cell Rate Algorithm (DGCRA) is active for the connection
and that violating cells are discarded. The cell rate which is in effect
at any particular instant is indicated in rxTrafficDescParm 4 of the
connection.
If the atmServiceCategory for this connection indicates
availableBitRate, a value of abrMonitored indicates that Dynamic
Generic Cell Rate Algorithm (DGCRA) is active for the connection
but that violating cells are counted only. The cell rate which is in
effect at any particular instant is indicated in rxTrafficDescParm 4
of the connection.
Parsed from file nortelPP-atmCoreV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-AtmCoreMIB
This attribute indicates the UPC state of the connection.
A value of notApplicable indicates that UPC is not applicable or not
supported for the connection. This is the case:
- when the connection's rxTrafficDescType is 1 or 2.
- for standard Vpt Vccs and basic Vpts.
A value of notApplicable is set regardless of whether UPC is
disabled or enabled in provisioning data.
A value of disabled indicates that UPC is applicable and supported
for the type of connection but has been turned off in the
provisioning data.
A value of enforced indicates that UPC is actively checking
conformance for the connection and is discarding or tagging cells
which do not conform to the connection traffic contract. The traffic
descriptor parameters used for UPC conformance are reflected in
the rxTrafficDescParms of the connection. On ATM IP cards, the
counts of UPC violations are visible in the Vcc, Vpc, or Vpt
rxUpcViolationsOnEnforcer1 or rxUpcViolationsOnEnforcer2
attributes.
ATM IP cards provide the ability to monitor UPC violations without
tagging or discarding. A value of monitored indicates that UPC is
actively checking conformance for the connection and counting the
violations, but is not discarding or tagging cells which do not
conform to the connection traffic contract. The traffic descriptor
parameters used for UPC conformance are reflected in the
rxTrafficDescParms of the connection. The counts of UPC
violations are visible in the Vcc, Vpc, or Vpt
rxUpcViolationsOnEnforcer1 or rxUpcViolationsOnEnforcer2
attributes. The value of monitored appears only on ATM IP cards.
If the atmServiceCategory for this connection indicates
availableBitRate, a value of abrEnforced indicates that Dynamic
Generic Cell Rate Algorithm (DGCRA) is active for the connection
and that violating cells are discarded. The cell rate which is in effect
at any particular instant is indicated in rxTrafficDescParm 4 of the
connection.
If the atmServiceCategory for this connection indicates
availableBitRate, a value of abrMonitored indicates that Dynamic
Generic Cell Rate Algorithm (DGCRA) is active for the connection
but that violating cells are counted only. The cell rate which is in
effect at any particular instant is indicated in rxTrafficDescParm 4
of the connection.
Parsed from file Nortel-Magellan-Passport-AtmCoreMIB.mib
Module: Nortel-Magellan-Passport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-AtmCoreMIB
[Automatically extracted from oidview.com]
atmIfVpcTmUsageParameterControl OBJECT-TYPE SYNTAX INTEGER { enforced(0), disabled(1), notApplicable(3), monitored(4), abrMonitored(5), abrEnforced(6) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the UPC state of the connection. A value of notApplicable indicates that UPC is not applicable or not supported for the connection. This is the case: - when the connection's rxTrafficDescType is 1 or 2. - for standard Vpt Vccs and basic Vpts. A value of notApplicable is set regardless of whether UPC is disabled or enabled in provisioning data. A value of disabled indicates that UPC is applicable and supported for the type of connection but has been turned off in the provisioning data. A value of enforced indicates that UPC is actively checking conformance for the connection and is discarding or tagging cells which do not conform to the connection traffic contract. The traffic descriptor parameters used for UPC conformance are reflected in the rxTrafficDescParms of the connection. On ATM IP cards, the counts of UPC violations are visible in the Vcc, Vpc, or Vpt rxUpcViolationsOnEnforcer1 or rxUpcViolationsOnEnforcer2 attributes. ATM IP cards provide the ability to monitor UPC violations without tagging or discarding. A value of monitored indicates that UPC is actively checking conformance for the connection and counting the violations, but is not discarding or tagging cells which do not conform to the connection traffic contract. The traffic descriptor parameters used for UPC conformance are reflected in the rxTrafficDescParms of the connection. The counts of UPC violations are visible in the Vcc, Vpc, or Vpt rxUpcViolationsOnEnforcer1 or rxUpcViolationsOnEnforcer2 attributes. The value of monitored appears only on ATM IP cards. If the atmServiceCategory for this connection indicates availableBitRate, a value of abrEnforced indicates that Dynamic Generic Cell Rate Algorithm (DGCRA) is active for the connection and that violating cells are discarded. The cell rate which is in effect at any particular instant is indicated in rxTrafficDescParm 4 of the connection. If the atmServiceCategory for this connection indicates availableBitRate, a value of abrMonitored indicates that Dynamic Generic Cell Rate Algorithm (DGCRA) is active for the connection but that violating cells are counted only. The cell rate which is in effect at any particular instant is indicated in rxTrafficDescParm 4 of the connection." ::= { atmIfVpcTmOperEntry 80 }
atmIfVpcTmUsageParameterControl OBJECT-TYPE SYNTAX INTEGER { enforced(0), disabled(1), notApplicable(3), monitored(4), abrMonitored(5), abrEnforced(6) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the UPC state of the connection. A value of notApplicable indicates that UPC is not applicable or not supported for the connection. This is the case: - when the connection's rxTrafficDescType is 1 or 2. - for standard Vpt Vccs and basic Vpts. A value of notApplicable is set regardless of whether UPC is disabled or enabled in provisioning data. A value of disabled indicates that UPC is applicable and supported for the type of connection but has been turned off in the provisioning data. A value of enforced indicates that UPC is actively checking conformance for the connection and is discarding or tagging cells which do not conform to the connection traffic contract. The traffic descriptor parameters used for UPC conformance are reflected in the rxTrafficDescParms of the connection. On ATM IP cards, the counts of UPC violations are visible in the Vcc, Vpc, or Vpt rxUpcViolationsOnEnforcer1 or rxUpcViolationsOnEnforcer2 attributes. ATM IP cards provide the ability to monitor UPC violations without tagging or discarding. A value of monitored indicates that UPC is actively checking conformance for the connection and counting the violations, but is not discarding or tagging cells which do not conform to the connection traffic contract. The traffic descriptor parameters used for UPC conformance are reflected in the rxTrafficDescParms of the connection. The counts of UPC violations are visible in the Vcc, Vpc, or Vpt rxUpcViolationsOnEnforcer1 or rxUpcViolationsOnEnforcer2 attributes. The value of monitored appears only on ATM IP cards. If the atmServiceCategory for this connection indicates availableBitRate, a value of abrEnforced indicates that Dynamic Generic Cell Rate Algorithm (DGCRA) is active for the connection and that violating cells are discarded. The cell rate which is in effect at any particular instant is indicated in rxTrafficDescParm 4 of the connection. If the atmServiceCategory for this connection indicates availableBitRate, a value of abrMonitored indicates that Dynamic Generic Cell Rate Algorithm (DGCRA) is active for the connection but that violating cells are counted only. The cell rate which is in effect at any particular instant is indicated in rxTrafficDescParm 4 of the connection." ::= { atmIfVpcTmOperEntry 80 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.10 | atmIfVpcTmTxTrafficDescType | 0 | 0 | T his attribute indicates the type of traffic management which is applied to the transmit direction of this connection as define… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.31 | atmIfVpcTmTxQosClass | 0 | 0 | This attribute indicates the quality of service for the calling to called direction for this connection. This is only applicable… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.32 | atmIfVpcTmTxQueueLength | 0 | 0 | This attribute indicates the current number of cells in the transmit queue for this connection. If this connection has unshapedT… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.33 | atmIfVpcTmTxQueueCongestionState | 0 | 0 | This attribute indicates the congestion state of the transmit queue for this connection. If this connection has unshapedTransmit… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.35 | atmIfVpcTmHoldingPriority | 0 | 0 | This attribute indicates the actual holding priority in effect for this connection. In a situation where the link bandwidth fluc… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.40 | atmIfVpcTmRxTrafficDescType | 0 | 0 | This attribute indicates the type of traffic management which is applied to the receive direction of this connection as defined … |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.61 | atmIfVpcTmRxQosClass | 0 | 0 | This attribute indicates the quality of service for the called to calling direction for this connection. This is only applicable… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.62 | atmIfVpcTmAtmServiceCategory | 0 | 0 | This attribute indicates the ATM service category used for traffic in both directions of the connection. This attribute does not… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.70 | atmIfVpcTmTrafficShaping | 0 | 0 | This attribute indicates the traffic shaping state of the connection. A value of notApplicable indicates that traffic shaping i… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.71 | atmIfVpcTmBearerClassBbc | 0 | 0 | This attribute indicates the bearer capability for this connection. Class a service is a connection-oriented, constant bit rate… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.72 | atmIfVpcTmTransferCapabilityBbc | 0 | 0 | This attribute indicates the transfer capability for this connection. Uni 3.0/3.1 traffic type and end-to-end timing parameters … |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.74 | atmIfVpcTmClippingBbc | 0 | 0 | This attribute indicates the value of the clipping susceptibility parameter in the broadband bearer capability (BBC) Information… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.75 | atmIfVpcTmUnshapedTransmitQueueing | 0 | 0 | This attribute indicates the unshaped transmit queuing state of the connection. A value of common indicates that transmit traffi… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.76 | atmIfVpcTmBestEffort | 0 | 0 | This attribute indicates value of best effort parameter in the ATM Traffic Descriptor Information Element. The value indicated i… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.78 | atmIfVpcTmForceTagging | 0 | 0 | This attribute indicates the state of force tagging option for this connection. Force tagging refers to setting the CLP bit for … |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.79 | atmIfVpcTmWeight | 0 | 0 | This attribute indicates the relative weight of this unshaped connection. Connections with a larger weight get a larger proporti… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.85 | atmIfVpcTmTxPacketWiseDiscard | 0 | 0 | This attribute indicates the current set of packet-wise discard functions in effect in the transmit data direction at this conne… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.86 | atmIfVpcTmRxPacketWiseDiscard | 0 | 0 | This attribute indicates the current set of packet-wise discard functions in effect in the receive data direction at this connec… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.90 | atmIfVpcTmBandwidthElastic | 0 | 0 | This attribute is only of importance for connections which are carried on a link with a variable bandwidth. For example, the band… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.100 | atmIfVpcTmBandwidthReduction | 0 | 0 | This attribute shows the amount by which the bandwidth has been reduced for this connection. This value is non-zero only for conn… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.110 | atmIfVpcTmAbrConnectionType | 0 | 0 | This attribute indicates the type of ABR behavior which is in effect at this connection. This attribute is only applicable if th… |