This attribute indicates the traffic shaping state of the connection.
A value of notApplicable indicates that traffic shaping is not
applicable or not supported for this connection. This is the case:
- when the txTrafficDescType is 1 or 2.
- for standard Vpt Vccs and basic Vpts.
- for CQC-based ATM cards, when the atmServiceCategory is
constantBitRate.
In these cases, the value of notApplicable is set regardless of
whether traffic shaping is enabled or disabled in the provisioning
data.
A value of disabled indicates that traffic shaping is applicable and
supported for the type of connection but has been turned off in the
provisioning data.
A value of linear or inverseUpc indicates that traffic shaping is
applicable and supported for the type of connection and has been
turned on in the provisioning data. This is the only case that
indicates that traffic shaping is performed on the connection. In this
case, the actual shaping rate is reflected in the txTrafficDescParm
attribute, parameter number 4. A value of linear indicates that
traffic is being shaped at the constant rate indicated in
txTrafficDescParm 4.
A value of inverseUpc is possible only on ATM IP cards. This value
indicates that the shaper strictly conforms to the requirements of a
dual leaky bucket UPC enforcer. This value is indicated if traffic
shaping is enabled, and the txTrafficDescType for this connection is
6, 7 or 8.
Traffic shaping for connections with atmServiceCategory as
availableBitRate (txTrafficDescType 9) depends upon the
abrConnectionType attribute. If abrConnectionType is sourceDest
or virtualSourceDest, the value of this attribute is dynamic. If
abrConnectionType is erSwitch or efciSwitch, this attribute is
notApplicable.
Parsed from file nortelPP-atmCoreV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-AtmCoreMIB
This attribute indicates the traffic shaping state of the connection.
A value of notApplicable indicates that traffic shaping is not
applicable or not supported for this connection. This is the case:
- when the txTrafficDescType is 1 or 2.
- for standard Vpt Vccs and basic Vpts.
- for CQC-based ATM cards, when the atmServiceCategory is
constantBitRate.
In these cases, the value of notApplicable is set regardless of
whether traffic shaping is enabled or disabled in the provisioning
data.
A value of disabled indicates that traffic shaping is applicable and
supported for the type of connection but has been turned off in the
provisioning data.
A value of linear or inverseUpc indicates that traffic shaping is
applicable and supported for the type of connection and has been
turned on in the provisioning data. This is the only case that
indicates that traffic shaping is performed on the connection. In this
case, the actual shaping rate is reflected in the txTrafficDescParm
attribute, parameter number 4. A value of linear indicates that
traffic is being shaped at the constant rate indicated in
txTrafficDescParm 4.
A value of inverseUpc is possible only on ATM IP cards. This value
indicates that the shaper strictly conforms to the requirements of a
dual leaky bucket UPC enforcer. This value is indicated if traffic
shaping is enabled, and the txTrafficDescType for this connection is
6, 7 or 8.
Traffic shaping for connections with atmServiceCategory as
availableBitRate (txTrafficDescType 9) depends upon the
abrConnectionType attribute. If abrConnectionType is sourceDest
or virtualSourceDest, the value of this attribute is dynamic. If
abrConnectionType is erSwitch or efciSwitch, this attribute is
notApplicable.
Parsed from file Nortel-Magellan-Passport-AtmCoreMIB.mib
Module: Nortel-Magellan-Passport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-AtmCoreMIB
[Automatically extracted from oidview.com]
atmIfVpcTmTrafficShaping OBJECT-TYPE SYNTAX INTEGER { disabled(1), notApplicable(4), linear(5), inverseUpc(6), dynamic(7) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the traffic shaping state of the connection. A value of notApplicable indicates that traffic shaping is not applicable or not supported for this connection. This is the case: - when the txTrafficDescType is 1 or 2. - for standard Vpt Vccs and basic Vpts. - for CQC-based ATM cards, when the atmServiceCategory is constantBitRate. In these cases, the value of notApplicable is set regardless of whether traffic shaping is enabled or disabled in the provisioning data. A value of disabled indicates that traffic shaping is applicable and supported for the type of connection but has been turned off in the provisioning data. A value of linear or inverseUpc indicates that traffic shaping is applicable and supported for the type of connection and has been turned on in the provisioning data. This is the only case that indicates that traffic shaping is performed on the connection. In this case, the actual shaping rate is reflected in the txTrafficDescParm attribute, parameter number 4. A value of linear indicates that traffic is being shaped at the constant rate indicated in txTrafficDescParm 4. A value of inverseUpc is possible only on ATM IP cards. This value indicates that the shaper strictly conforms to the requirements of a dual leaky bucket UPC enforcer. This value is indicated if traffic shaping is enabled, and the txTrafficDescType for this connection is 6, 7 or 8. Traffic shaping for connections with atmServiceCategory as availableBitRate (txTrafficDescType 9) depends upon the abrConnectionType attribute. If abrConnectionType is sourceDest or virtualSourceDest, the value of this attribute is dynamic. If abrConnectionType is erSwitch or efciSwitch, this attribute is notApplicable." ::= { atmIfVpcTmOperEntry 70 }
atmIfVpcTmTrafficShaping OBJECT-TYPE SYNTAX INTEGER { disabled(1), notApplicable(4), linear(5), inverseUpc(6), dynamic(7) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the traffic shaping state of the connection. A value of notApplicable indicates that traffic shaping is not applicable or not supported for this connection. This is the case: - when the txTrafficDescType is 1 or 2. - for standard Vpt Vccs and basic Vpts. - for CQC-based ATM cards, when the atmServiceCategory is constantBitRate. In these cases, the value of notApplicable is set regardless of whether traffic shaping is enabled or disabled in the provisioning data. A value of disabled indicates that traffic shaping is applicable and supported for the type of connection but has been turned off in the provisioning data. A value of linear or inverseUpc indicates that traffic shaping is applicable and supported for the type of connection and has been turned on in the provisioning data. This is the only case that indicates that traffic shaping is performed on the connection. In this case, the actual shaping rate is reflected in the txTrafficDescParm attribute, parameter number 4. A value of linear indicates that traffic is being shaped at the constant rate indicated in txTrafficDescParm 4. A value of inverseUpc is possible only on ATM IP cards. This value indicates that the shaper strictly conforms to the requirements of a dual leaky bucket UPC enforcer. This value is indicated if traffic shaping is enabled, and the txTrafficDescType for this connection is 6, 7 or 8. Traffic shaping for connections with atmServiceCategory as availableBitRate (txTrafficDescType 9) depends upon the abrConnectionType attribute. If abrConnectionType is sourceDest or virtualSourceDest, the value of this attribute is dynamic. If abrConnectionType is erSwitch or efciSwitch, this attribute is notApplicable." ::= { atmIfVpcTmOperEntry 70 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.10 | atmIfVpcTmTxTrafficDescType | 0 | 0 | T his attribute indicates the type of traffic management which is applied to the transmit direction of this connection as define… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.31 | atmIfVpcTmTxQosClass | 0 | 0 | This attribute indicates the quality of service for the calling to called direction for this connection. This is only applicable… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.32 | atmIfVpcTmTxQueueLength | 0 | 0 | This attribute indicates the current number of cells in the transmit queue for this connection. If this connection has unshapedT… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.33 | atmIfVpcTmTxQueueCongestionState | 0 | 0 | This attribute indicates the congestion state of the transmit queue for this connection. If this connection has unshapedTransmit… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.35 | atmIfVpcTmHoldingPriority | 0 | 0 | This attribute indicates the actual holding priority in effect for this connection. In a situation where the link bandwidth fluc… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.40 | atmIfVpcTmRxTrafficDescType | 0 | 0 | This attribute indicates the type of traffic management which is applied to the receive direction of this connection as defined … |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.61 | atmIfVpcTmRxQosClass | 0 | 0 | This attribute indicates the quality of service for the called to calling direction for this connection. This is only applicable… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.62 | atmIfVpcTmAtmServiceCategory | 0 | 0 | This attribute indicates the ATM service category used for traffic in both directions of the connection. This attribute does not… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.71 | atmIfVpcTmBearerClassBbc | 0 | 0 | This attribute indicates the bearer capability for this connection. Class a service is a connection-oriented, constant bit rate… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.72 | atmIfVpcTmTransferCapabilityBbc | 0 | 0 | This attribute indicates the transfer capability for this connection. Uni 3.0/3.1 traffic type and end-to-end timing parameters … |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.74 | atmIfVpcTmClippingBbc | 0 | 0 | This attribute indicates the value of the clipping susceptibility parameter in the broadband bearer capability (BBC) Information… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.75 | atmIfVpcTmUnshapedTransmitQueueing | 0 | 0 | This attribute indicates the unshaped transmit queuing state of the connection. A value of common indicates that transmit traffi… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.76 | atmIfVpcTmBestEffort | 0 | 0 | This attribute indicates value of best effort parameter in the ATM Traffic Descriptor Information Element. The value indicated i… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.78 | atmIfVpcTmForceTagging | 0 | 0 | This attribute indicates the state of force tagging option for this connection. Force tagging refers to setting the CLP bit for … |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.79 | atmIfVpcTmWeight | 0 | 0 | This attribute indicates the relative weight of this unshaped connection. Connections with a larger weight get a larger proporti… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.80 | atmIfVpcTmUsageParameterControl | 0 | 0 | This attribute indicates the UPC state of the connection. A value of notApplicable indicates that UPC is not applicable or not s… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.85 | atmIfVpcTmTxPacketWiseDiscard | 0 | 0 | This attribute indicates the current set of packet-wise discard functions in effect in the transmit data direction at this conne… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.86 | atmIfVpcTmRxPacketWiseDiscard | 0 | 0 | This attribute indicates the current set of packet-wise discard functions in effect in the receive data direction at this connec… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.90 | atmIfVpcTmBandwidthElastic | 0 | 0 | This attribute is only of importance for connections which are carried on a link with a variable bandwidth. For example, the band… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.100 | atmIfVpcTmBandwidthReduction | 0 | 0 | This attribute shows the amount by which the bandwidth has been reduced for this connection. This value is non-zero only for conn… |
| 1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.110 | atmIfVpcTmAbrConnectionType | 0 | 0 | This attribute indicates the type of ABR behavior which is in effect at this connection. This attribute is only applicable if th… |