This attribute indicates the type of ABR behavior which is in effect
at this connection. This attribute is only applicable if the
atmServiceCategory attribute is availableBitRate. If the
atmServiceCategory attribute is not availableBitRate, or if the
connection is not active, this attribute value is displayed as
notApplicable.
For CQC-based ATM cards, the only possible values are
notApplicable, efciSwitch or nonAbrInterworking. In EFCI
marking mode, the Explicit Forward Congestion Indication (EFCI)
field in the data cell headers is used to indicate transmit queue
congestion.
For ATM IP cards, if the connectionPointType is displayed as
connectionEndPoint, this attribute has the value sourceDest. In this
mode, the ABR Source and Destination behavior is in effect at this
connection. This attribute is also sourceDest in the case where the
next hop connection is specified as nonAbrInterworking. The next
hop connection is the Vcc or Vpc identified by the nextHop attribute
of the Nrp or Rp component.
If the connectionPointType is not connectionEndPoint, the value of
this attribute depends upon the abrConnectionType provisioning
and the card type to which the traffic is forwarded on the backplane.
The default abrConnectionType is provisioned at the CA Abr
abrConnectionType attribute, and may be overridden for a
provisioned connection in the Vcd Tm abrConnectionType or Vpd
Tm abrConnectionType attribute. If the CA Abr abrConnectionType
attribute is virtualSourceDest at either one of the two connection
points, and if both the connection points are defined on ATM IP
cards, virtual source and destination behavior is applied to the
connection. In this instance, the attribute displays the value
virtualSourceDest.
This attribute has the value erSwitch if ABR explicit rate
functionality is in effect at this connection. In this mode, the switch
may modify the Explicit Rate (ER) field of backward Resource
Management (RM) cells to indicate the status of congestion at this
connection point.
This attribute has the value nonAbrInterworking in the case where
this connection point is functioning as an SPVC origin for an ABR
connection where the link side of this connection is configured as a
non-ABR ATM service category. This means that there are no RM
cells on the link side of this connection, and that the next hop
connection point is performing as an ABR sourceDest.
Parsed from file nortelPP-atmCoreV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-AtmCoreMIB
This attribute indicates the type of ABR behavior which is in effect
at this connection. This attribute is only applicable if the
atmServiceCategory attribute is availableBitRate. If the
atmServiceCategory attribute is not availableBitRate, or if the
connection is not active, this attribute value is displayed as
notApplicable.
For CQC-based ATM cards, the only possible values are
notApplicable, efciSwitch or nonAbrInterworking. In EFCI
marking mode, the Explicit Forward Congestion Indication (EFCI)
field in the data cell headers is used to indicate transmit queue
congestion.
For ATM IP cards, if the connectionPointType is displayed as
connectionEndPoint, this attribute has the value sourceDest. In this
mode, the ABR Source and Destination behavior is in effect at this
connection. This attribute is also sourceDest in the case where the
next hop connection is specified as nonAbrInterworking. The next
hop connection is the Vcc or Vpc identified by the nextHop attribute
of the Nrp or Rp component.
If the connectionPointType is not connectionEndPoint, the value of
this attribute depends upon the abrConnectionType provisioning
and the card type to which the traffic is forwarded on the backplane.
The default abrConnectionType is provisioned at the CA Abr
abrConnectionType attribute, and may be overridden for a
provisioned connection in the Vcd Tm abrConnectionType or Vpd
Tm abrConnectionType attribute. If the CA Abr abrConnectionType
attribute is virtualSourceDest at either one of the two connection
points, and if both the connection points are defined on ATM IP
cards, virtual source and destination behavior is applied to the
connection. In this instance, the attribute displays the value
virtualSourceDest.
This attribute has the value erSwitch if ABR explicit rate
functionality is in effect at this connection. In this mode, the switch
may modify the Explicit Rate (ER) field of backward Resource
Management (RM) cells to indicate the status of congestion at this
connection point.
This attribute has the value nonAbrInterworking in the case where
this connection point is functioning as an SPVC origin for an ABR
connection where the link side of this connection is configured as a
non-ABR ATM service category. This means that there are no RM
cells on the link side of this connection, and that the next hop
connection point is performing as an ABR sourceDest.
Parsed from file Nortel-Magellan-Passport-AtmCoreMIB.mib
Module: Nortel-Magellan-Passport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-AtmCoreMIB
[Automatically extracted from oidview.com]
atmIfVpcTmAbrConnectionType OBJECT-TYPE SYNTAX INTEGER { erSwitch(1), efciSwitch(2), virtualSourceDest(3), sourceDest(4), nonAbrInterworking(5), notApplicable(15) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the type of ABR behavior which is in effect at this connection. This attribute is only applicable if the atmServiceCategory attribute is availableBitRate. If the atmServiceCategory attribute is not availableBitRate, or if the connection is not active, this attribute value is displayed as notApplicable. For CQC-based ATM cards, the only possible values are notApplicable, efciSwitch or nonAbrInterworking. In EFCI marking mode, the Explicit Forward Congestion Indication (EFCI) field in the data cell headers is used to indicate transmit queue congestion. For ATM IP cards, if the connectionPointType is displayed as connectionEndPoint, this attribute has the value sourceDest. In this mode, the ABR Source and Destination behavior is in effect at this connection. This attribute is also sourceDest in the case where the next hop connection is specified as nonAbrInterworking. The next hop connection is the Vcc or Vpc identified by the nextHop attribute of the Nrp or Rp component. If the connectionPointType is not connectionEndPoint, the value of this attribute depends upon the abrConnectionType provisioning and the card type to which the traffic is forwarded on the backplane. The default abrConnectionType is provisioned at the CA Abr abrConnectionType attribute, and may be overridden for a provisioned connection in the Vcd Tm abrConnectionType or Vpd Tm abrConnectionType attribute. If the CA Abr abrConnectionType attribute is virtualSourceDest at either one of the two connection points, and if both the connection points are defined on ATM IP cards, virtual source and destination behavior is applied to the connection. In this instance, the attribute displays the value virtualSourceDest. This attribute has the value erSwitch if ABR explicit rate functionality is in effect at this connection. In this mode, the switch may modify the Explicit Rate (ER) field of backward Resource Management (RM) cells to indicate the status of congestion at this connection point. This attribute has the value nonAbrInterworking in the case where this connection point is functioning as an SPVC origin for an ABR connection where the link side of this connection is configured as a non-ABR ATM service category. This means that there are no RM cells on the link side of this connection, and that the next hop connection point is performing as an ABR sourceDest." ::= { atmIfVpcTmOperEntry 110 }
atmIfVpcTmAbrConnectionType OBJECT-TYPE SYNTAX INTEGER { erSwitch(1), efciSwitch(2), virtualSourceDest(3), sourceDest(4), nonAbrInterworking(5), notApplicable(15) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the type of ABR behavior which is in effect at this connection. This attribute is only applicable if the atmServiceCategory attribute is availableBitRate. If the atmServiceCategory attribute is not availableBitRate, or if the connection is not active, this attribute value is displayed as notApplicable. For CQC-based ATM cards, the only possible values are notApplicable, efciSwitch or nonAbrInterworking. In EFCI marking mode, the Explicit Forward Congestion Indication (EFCI) field in the data cell headers is used to indicate transmit queue congestion. For ATM IP cards, if the connectionPointType is displayed as connectionEndPoint, this attribute has the value sourceDest. In this mode, the ABR Source and Destination behavior is in effect at this connection. This attribute is also sourceDest in the case where the next hop connection is specified as nonAbrInterworking. The next hop connection is the Vcc or Vpc identified by the nextHop attribute of the Nrp or Rp component. If the connectionPointType is not connectionEndPoint, the value of this attribute depends upon the abrConnectionType provisioning and the card type to which the traffic is forwarded on the backplane. The default abrConnectionType is provisioned at the CA Abr abrConnectionType attribute, and may be overridden for a provisioned connection in the Vcd Tm abrConnectionType or Vpd Tm abrConnectionType attribute. If the CA Abr abrConnectionType attribute is virtualSourceDest at either one of the two connection points, and if both the connection points are defined on ATM IP cards, virtual source and destination behavior is applied to the connection. In this instance, the attribute displays the value virtualSourceDest. This attribute has the value erSwitch if ABR explicit rate functionality is in effect at this connection. In this mode, the switch may modify the Explicit Rate (ER) field of backward Resource Management (RM) cells to indicate the status of congestion at this connection point. This attribute has the value nonAbrInterworking in the case where this connection point is functioning as an SPVC origin for an ABR connection where the link side of this connection is configured as a non-ABR ATM service category. This means that there are no RM cells on the link side of this connection, and that the next hop connection point is performing as an ABR sourceDest." ::= { atmIfVpcTmOperEntry 110 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.10 | atmIfVpcTmTxTrafficDescType | 0 | 0 | T his attribute indicates the type of traffic management which is applied to the transmit direction of this connection as define… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.31 | atmIfVpcTmTxQosClass | 0 | 0 | This attribute indicates the quality of service for the calling to called direction for this connection. This is only applicable… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.32 | atmIfVpcTmTxQueueLength | 0 | 0 | This attribute indicates the current number of cells in the transmit queue for this connection. If this connection has unshapedT… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.33 | atmIfVpcTmTxQueueCongestionState | 0 | 0 | This attribute indicates the congestion state of the transmit queue for this connection. If this connection has unshapedTransmit… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.35 | atmIfVpcTmHoldingPriority | 0 | 0 | This attribute indicates the actual holding priority in effect for this connection. In a situation where the link bandwidth fluc… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.40 | atmIfVpcTmRxTrafficDescType | 0 | 0 | This attribute indicates the type of traffic management which is applied to the receive direction of this connection as defined … |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.61 | atmIfVpcTmRxQosClass | 0 | 0 | This attribute indicates the quality of service for the called to calling direction for this connection. This is only applicable… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.62 | atmIfVpcTmAtmServiceCategory | 0 | 0 | This attribute indicates the ATM service category used for traffic in both directions of the connection. This attribute does not… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.70 | atmIfVpcTmTrafficShaping | 0 | 0 | This attribute indicates the traffic shaping state of the connection. A value of notApplicable indicates that traffic shaping i… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.71 | atmIfVpcTmBearerClassBbc | 0 | 0 | This attribute indicates the bearer capability for this connection. Class a service is a connection-oriented, constant bit rate… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.72 | atmIfVpcTmTransferCapabilityBbc | 0 | 0 | This attribute indicates the transfer capability for this connection. Uni 3.0/3.1 traffic type and end-to-end timing parameters … |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.74 | atmIfVpcTmClippingBbc | 0 | 0 | This attribute indicates the value of the clipping susceptibility parameter in the broadband bearer capability (BBC) Information… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.75 | atmIfVpcTmUnshapedTransmitQueueing | 0 | 0 | This attribute indicates the unshaped transmit queuing state of the connection. A value of common indicates that transmit traffi… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.76 | atmIfVpcTmBestEffort | 0 | 0 | This attribute indicates value of best effort parameter in the ATM Traffic Descriptor Information Element. The value indicated i… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.78 | atmIfVpcTmForceTagging | 0 | 0 | This attribute indicates the state of force tagging option for this connection. Force tagging refers to setting the CLP bit for … |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.79 | atmIfVpcTmWeight | 0 | 0 | This attribute indicates the relative weight of this unshaped connection. Connections with a larger weight get a larger proporti… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.80 | atmIfVpcTmUsageParameterControl | 0 | 0 | This attribute indicates the UPC state of the connection. A value of notApplicable indicates that UPC is not applicable or not s… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.85 | atmIfVpcTmTxPacketWiseDiscard | 0 | 0 | This attribute indicates the current set of packet-wise discard functions in effect in the transmit data direction at this conne… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.86 | atmIfVpcTmRxPacketWiseDiscard | 0 | 0 | This attribute indicates the current set of packet-wise discard functions in effect in the receive data direction at this connec… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.90 | atmIfVpcTmBandwidthElastic | 0 | 0 | This attribute is only of importance for connections which are carried on a link with a variable bandwidth. For example, the band… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.100 | atmIfVpcTmBandwidthReduction | 0 | 0 | This attribute shows the amount by which the bandwidth has been reduced for this connection. This value is non-zero only for conn… |