This attribute indicates the relative weight of this unshaped
connection. Connections with a larger weight get a larger proportion
of the link bandwidth, or in the case of standard Vpt Vccs, the Vpt
bandwidth.
For all but standard Vpt Vccs, the default connection weight is
determined by the weight policy for a service category and the
traffic descriptor for a connection. For standard Vpt Vccs, the
default connection weight is determined by the Vcc's service
category.
For CQC-based ATM cards, this attribute is not applicable and is
not displayed.
A value from 1 to 4095 indicates an actual weight. The value
upToQueueLimit indicates that the weight of a connection is up to
the transmit queue limit for this connection. upToQueueLimit is
used with common (first-in-first-out) queueing.
This attribute is displayed as notApplicable if:
- this connection has trafficShaping displayed as linear or
inverseUpc.
- this is a basic Vpt.
VALUES (
0 = upToQueueLimit
65534 = notApplicable
)
Parsed from file nortelPP-atmCoreV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-AtmCoreMIB
This attribute indicates the relative weight of this unshaped
connection. Connections with a larger weight get a larger proportion
of the link bandwidth, or in the case of standard Vpt Vccs, the Vpt
bandwidth.
For all but standard Vpt Vccs, the default connection weight is
determined by the weight policy for a service category and the
traffic descriptor for a connection. For standard Vpt Vccs, the
default connection weight is determined by the Vcc's service
category.
For CQC-based ATM cards, this attribute is not applicable and is
not displayed.
A value from 1 to 4095 indicates an actual weight. The value
upToQueueLimit indicates that the weight of a connection is up to
the transmit queue limit for this connection. upToQueueLimit is
used with common (first-in-first-out) queueing.
This attribute is displayed as notApplicable if:
- this connection has trafficShaping displayed as linear or
inverseUpc.
- this is a basic Vpt.
VALUES (
0 = upToQueueLimit
65534 = notApplicable
)
Parsed from file Nortel-Magellan-Passport-AtmCoreMIB.mib
Module: Nortel-Magellan-Passport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-AtmCoreMIB
[Automatically extracted from oidview.com]
atmIfVpcTmWeight OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..4095 | 65534) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the relative weight of this unshaped connection. Connections with a larger weight get a larger proportion of the link bandwidth, or in the case of standard Vpt Vccs, the Vpt bandwidth. For all but standard Vpt Vccs, the default connection weight is determined by the weight policy for a service category and the traffic descriptor for a connection. For standard Vpt Vccs, the default connection weight is determined by the Vcc's service category. For CQC-based ATM cards, this attribute is not applicable and is not displayed. A value from 1 to 4095 indicates an actual weight. The value upToQueueLimit indicates that the weight of a connection is up to the transmit queue limit for this connection. upToQueueLimit is used with common (first-in-first-out) queueing. This attribute is displayed as notApplicable if: - this connection has trafficShaping displayed as linear or inverseUpc. - this is a basic Vpt. VALUES ( 0 = upToQueueLimit 65534 = notApplicable )" ::= { atmIfVpcTmOperEntry 79 }
atmIfVpcTmWeight OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..4095 | 65534) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the relative weight of this unshaped connection. Connections with a larger weight get a larger proportion of the link bandwidth, or in the case of standard Vpt Vccs, the Vpt bandwidth. For all but standard Vpt Vccs, the default connection weight is determined by the weight policy for a service category and the traffic descriptor for a connection. For standard Vpt Vccs, the default connection weight is determined by the Vcc's service category. For CQC-based ATM cards, this attribute is not applicable and is not displayed. A value from 1 to 4095 indicates an actual weight. The value upToQueueLimit indicates that the weight of a connection is up to the transmit queue limit for this connection. upToQueueLimit is used with common (first-in-first-out) queueing. This attribute is displayed as notApplicable if: - this connection has trafficShaping displayed as linear or inverseUpc. - this is a basic Vpt. VALUES ( 0 = upToQueueLimit 65534 = notApplicable )" ::= { atmIfVpcTmOperEntry 79 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.10 | atmIfVpcTmTxTrafficDescType | 0 | 0 | T his attribute indicates the type of traffic management which is applied to the transmit direction of this connection as define… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.31 | atmIfVpcTmTxQosClass | 0 | 0 | This attribute indicates the quality of service for the calling to called direction for this connection. This is only applicable… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.32 | atmIfVpcTmTxQueueLength | 0 | 0 | This attribute indicates the current number of cells in the transmit queue for this connection. If this connection has unshapedT… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.33 | atmIfVpcTmTxQueueCongestionState | 0 | 0 | This attribute indicates the congestion state of the transmit queue for this connection. If this connection has unshapedTransmit… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.35 | atmIfVpcTmHoldingPriority | 0 | 0 | This attribute indicates the actual holding priority in effect for this connection. In a situation where the link bandwidth fluc… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.40 | atmIfVpcTmRxTrafficDescType | 0 | 0 | This attribute indicates the type of traffic management which is applied to the receive direction of this connection as defined … |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.61 | atmIfVpcTmRxQosClass | 0 | 0 | This attribute indicates the quality of service for the called to calling direction for this connection. This is only applicable… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.62 | atmIfVpcTmAtmServiceCategory | 0 | 0 | This attribute indicates the ATM service category used for traffic in both directions of the connection. This attribute does not… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.70 | atmIfVpcTmTrafficShaping | 0 | 0 | This attribute indicates the traffic shaping state of the connection. A value of notApplicable indicates that traffic shaping i… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.71 | atmIfVpcTmBearerClassBbc | 0 | 0 | This attribute indicates the bearer capability for this connection. Class a service is a connection-oriented, constant bit rate… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.72 | atmIfVpcTmTransferCapabilityBbc | 0 | 0 | This attribute indicates the transfer capability for this connection. Uni 3.0/3.1 traffic type and end-to-end timing parameters … |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.74 | atmIfVpcTmClippingBbc | 0 | 0 | This attribute indicates the value of the clipping susceptibility parameter in the broadband bearer capability (BBC) Information… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.75 | atmIfVpcTmUnshapedTransmitQueueing | 0 | 0 | This attribute indicates the unshaped transmit queuing state of the connection. A value of common indicates that transmit traffi… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.76 | atmIfVpcTmBestEffort | 0 | 0 | This attribute indicates value of best effort parameter in the ATM Traffic Descriptor Information Element. The value indicated i… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.78 | atmIfVpcTmForceTagging | 0 | 0 | This attribute indicates the state of force tagging option for this connection. Force tagging refers to setting the CLP bit for … |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.80 | atmIfVpcTmUsageParameterControl | 0 | 0 | This attribute indicates the UPC state of the connection. A value of notApplicable indicates that UPC is not applicable or not s… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.85 | atmIfVpcTmTxPacketWiseDiscard | 0 | 0 | This attribute indicates the current set of packet-wise discard functions in effect in the transmit data direction at this conne… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.86 | atmIfVpcTmRxPacketWiseDiscard | 0 | 0 | This attribute indicates the current set of packet-wise discard functions in effect in the receive data direction at this connec… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.90 | atmIfVpcTmBandwidthElastic | 0 | 0 | This attribute is only of importance for connections which are carried on a link with a variable bandwidth. For example, the band… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.100 | atmIfVpcTmBandwidthReduction | 0 | 0 | This attribute shows the amount by which the bandwidth has been reduced for this connection. This value is non-zero only for conn… |
1.3.6.1.4.1.562.2.4.1.114.4.9.100.1.110 | atmIfVpcTmAbrConnectionType | 0 | 0 | This attribute indicates the type of ABR behavior which is in effect at this connection. This attribute is only applicable if th… |