Vendor: Eastern Research Inc.
Module: ERI-DNX-SMC-MIB
[Automatically extracted from oidview.com]
addConnRecord OBJECT IDENTIFIER ::= { connections 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.644.2.4.1.8.5.1 | addMapID | 0 | 0 | This number identifies the connection map where the new Connection is to be added. A value of zero will cause the system to add t… |
1.3.6.1.4.1.644.2.4.1.8.5.2 | addConnID | 0 | 0 | This number defaults to connection ID zero, which if used in a SET PDU, notifies the system to find and use the next available Co… |
1.3.6.1.4.1.644.2.4.1.8.5.3 | addConnName | 0 | 0 | This is the textual description of a connection within a given configuration map. This name is optional and will be generated by… |
1.3.6.1.4.1.644.2.4.1.8.5.4 | addConnType | 0 | 0 | The connection type for this system connection. fullDuplex (0) Bi-directional connection from Source port to Destination… |
1.3.6.1.4.1.644.2.4.1.8.5.5 | addSrcAddr | 0 | 0 | The source port timeslot address for this new connection. The format is represented using an IP address syntax (4 byte string). … |
1.3.6.1.4.1.644.2.4.1.8.5.6 | addDestAddr | 0 | 0 | The destination port timeslot address for this new connection. The format is represented using an IP address syntax (4 byte strin… |
1.3.6.1.4.1.644.2.4.1.8.5.7 | addComm | 0 | 0 | The type of communications utilized on this system connection. data (0) Data only voice (1) Voice only voiceAuToMu (2) Voice wi… |
1.3.6.1.4.1.644.2.4.1.8.5.8 | addConnSpeed | 0 | 0 | The data transmission speed in kilobytes per second (kbps) for this connection. The format is: -Speed in kbps-number of DS0-kbps… |
1.3.6.1.4.1.644.2.4.1.8.5.9 | addSrcTsBitmap | 0 | 0 | This is a bit field used for the source port timeslots. Each bit represents a link timeslot on the source port. Setting the bit i… |
1.3.6.1.4.1.644.2.4.1.8.5.10 | addDestTsBitmap | 0 | 0 | This is a bit field used for the destination port timeslots. Each bit represents a link timeslot on the destination port. Setting… |
1.3.6.1.4.1.644.2.4.1.8.5.11 | addBroadSrcId | 0 | 0 | The connection ID number of the broadcast source connection for a listener connection to read from. |
1.3.6.1.4.1.644.2.4.1.8.5.12 | addTestMode | 0 | 0 | This indicates whether the current connection is in test mode, and if so, the type of test access being used. none (0… |
1.3.6.1.4.1.644.2.4.1.8.5.13 | addCmdStatus | 0 | 0 | The command status for this system connection row/record. The value used in a SET will be replaced by a response value in the GET… |
1.3.6.1.4.1.644.2.4.1.8.5.14 | addSrcTrunkCProfile | 0 | 0 | This identifies the hex value used for the start of signaling. The valid values are in hex format 0 through f. |
1.3.6.1.4.1.644.2.4.1.8.5.15 | addDestTrunkCProfile | 0 | 0 | This identifies the hex value used for the end of signaling. The valid values are in hex format 0 through f. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.644.2.4.1.8.1 | connInfo | 3 | 3 | None |
1.3.6.1.4.1.644.2.4.1.8.2 | connMapTable | 1 | 10 | This is the Connection Map table which consists of 5 connection configuration map entries. |
1.3.6.1.4.1.644.2.4.1.8.3 | sysConnTable | 1 | 22 | This is the system Connection table which consists of connection entries from all available configuration maps. There are 5 sep… |
1.3.6.1.4.1.644.2.4.1.8.4 | actvConnTable | 1 | 22 | This is the Active Map Connection table which consists of connection entries from the active configuration map. There are 5 sep… |
1.3.6.1.4.1.644.2.4.1.8.6 | trunkCProfileTable | 1 | 6 | This is the Trunk Conditioning Profile table which consists of 16 entries of configured signaling data profiles. |