The connection type for this system connection.
fullDuplex (0) Bi-directional connection from Source
port to Destination port and vice-versa.
broadcastConnection (1) One directional connection from Source
to Dest ports.
broadcastMaster (2) Input connection from Source port to
backplane only.
listenSrc (3) Output connection from backplane to
Destination port. Must be configured to
'listen' to an active Source port.
listenDest (4) Output connection from backplane to
Destination port. Must be configured to
'listen' to an active Dest port.
listenerConnection (7) Creates listenSrc or listenDest by providing
addSrcAddr rather than addBroadSrcId.
vcmp (8) Voice Compression - Applicable to DNX-1u supporting
Transcoder hardware. Provides cross-connect capability
between uncompressed source and compressed destination.
subChannel (9) Applicable to DNX-1u supporting Transcoder hardware.
Connection allowing the user to map source's compressed
bit group to the destination's bit group.
subRate (10) Sub-rate level switching connection that must use
ConnectionSpeed of 32k and must specify if high nibble or
low nibble timeslot bits are used for both Src and Dest.
Parsed from file ERI-DNX-SMC-MIB.mib
Module: ERI-DNX-SMC-MIB
Vendor: Eastern Research Inc.
Module: ERI-DNX-SMC-MIB
[Automatically extracted from oidview.com]
addConnType OBJECT-TYPE SYNTAX ConnectionType MAX-ACCESS read-write STATUS current DESCRIPTION "The connection type for this system connection. fullDuplex (0) Bi-directional connection from Source port to Destination port and vice-versa. broadcastConnection (1) One directional connection from Source to Dest ports. broadcastMaster (2) Input connection from Source port to backplane only. listenSrc (3) Output connection from backplane to Destination port. Must be configured to 'listen' to an active Source port. listenDest (4) Output connection from backplane to Destination port. Must be configured to 'listen' to an active Dest port. listenerConnection (7) Creates listenSrc or listenDest by providing addSrcAddr rather than addBroadSrcId. vcmp (8) Voice Compression - Applicable to DNX-1u supporting Transcoder hardware. Provides cross-connect capability between uncompressed source and compressed destination. subChannel (9) Applicable to DNX-1u supporting Transcoder hardware. Connection allowing the user to map source's compressed bit group to the destination's bit group. subRate (10) Sub-rate level switching connection that must use ConnectionSpeed of 32k and must specify if high nibble or low nibble timeslot bits are used for both Src and Dest." ::= { addConnRecord 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.644.2.4.1.8.5.1 | addMapID | 0 | 0 | This number identifies the connection map where the new Connection is to be added. A value of zero will cause the system to add t… |
1.3.6.1.4.1.644.2.4.1.8.5.2 | addConnID | 0 | 0 | This number defaults to connection ID zero, which if used in a SET PDU, notifies the system to find and use the next available Co… |
1.3.6.1.4.1.644.2.4.1.8.5.3 | addConnName | 0 | 0 | This is the textual description of a connection within a given configuration map. This name is optional and will be generated by… |
1.3.6.1.4.1.644.2.4.1.8.5.5 | addSrcAddr | 0 | 0 | The source port timeslot address for this new connection. The format is represented using an IP address syntax (4 byte string). … |
1.3.6.1.4.1.644.2.4.1.8.5.6 | addDestAddr | 0 | 0 | The destination port timeslot address for this new connection. The format is represented using an IP address syntax (4 byte strin… |
1.3.6.1.4.1.644.2.4.1.8.5.7 | addComm | 0 | 0 | The type of communications utilized on this system connection. data (0) Data only voice (1) Voice only voiceAuToMu (2) Voice wi… |
1.3.6.1.4.1.644.2.4.1.8.5.8 | addConnSpeed | 0 | 0 | The data transmission speed in kilobytes per second (kbps) for this connection. The format is: -Speed in kbps-number of DS0-kbps… |
1.3.6.1.4.1.644.2.4.1.8.5.9 | addSrcTsBitmap | 0 | 0 | This is a bit field used for the source port timeslots. Each bit represents a link timeslot on the source port. Setting the bit i… |
1.3.6.1.4.1.644.2.4.1.8.5.10 | addDestTsBitmap | 0 | 0 | This is a bit field used for the destination port timeslots. Each bit represents a link timeslot on the destination port. Setting… |
1.3.6.1.4.1.644.2.4.1.8.5.11 | addBroadSrcId | 0 | 0 | The connection ID number of the broadcast source connection for a listener connection to read from. |
1.3.6.1.4.1.644.2.4.1.8.5.12 | addTestMode | 0 | 0 | This indicates whether the current connection is in test mode, and if so, the type of test access being used. none (0… |
1.3.6.1.4.1.644.2.4.1.8.5.13 | addCmdStatus | 0 | 0 | The command status for this system connection row/record. The value used in a SET will be replaced by a response value in the GET… |
1.3.6.1.4.1.644.2.4.1.8.5.14 | addSrcTrunkCProfile | 0 | 0 | This identifies the hex value used for the start of signaling. The valid values are in hex format 0 through f. |
1.3.6.1.4.1.644.2.4.1.8.5.15 | addDestTrunkCProfile | 0 | 0 | This identifies the hex value used for the end of signaling. The valid values are in hex format 0 through f. |