This number defaults to connection ID zero, which if used in
a SET PDU, notifies the system to find and use the next available
Connection ID. If this number is SET to a non-zero value, the
system will attempt to use that number for the Connection ID of
the new Connection being added. If the ID is already in use with
different Connection parameters, an error in the CmdStatus will be
returned.
Parsed from file ERI-DNX-SMC-MIB.mib
Module: ERI-DNX-SMC-MIB
Vendor: Eastern Research Inc.
Module: ERI-DNX-SMC-MIB
[Automatically extracted from oidview.com]
addConnID OBJECT-TYPE SYNTAX Integer32 (0..16224) MAX-ACCESS read-write STATUS current DESCRIPTION "This number defaults to connection ID zero, which if used in a SET PDU, notifies the system to find and use the next available Connection ID. If this number is SET to a non-zero value, the system will attempt to use that number for the Connection ID of the new Connection being added. If the ID is already in use with different Connection parameters, an error in the CmdStatus will be returned." ::= { addConnRecord 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.644.2.4.1.8.5.1 | addMapID | 0 | 0 | This number identifies the connection map where the new Connection is to be added. A value of zero will cause the system to add t… |
1.3.6.1.4.1.644.2.4.1.8.5.3 | addConnName | 0 | 0 | This is the textual description of a connection within a given configuration map. This name is optional and will be generated by… |
1.3.6.1.4.1.644.2.4.1.8.5.4 | addConnType | 0 | 0 | The connection type for this system connection. fullDuplex (0) Bi-directional connection from Source port to Destination… |
1.3.6.1.4.1.644.2.4.1.8.5.5 | addSrcAddr | 0 | 0 | The source port timeslot address for this new connection. The format is represented using an IP address syntax (4 byte string). … |
1.3.6.1.4.1.644.2.4.1.8.5.6 | addDestAddr | 0 | 0 | The destination port timeslot address for this new connection. The format is represented using an IP address syntax (4 byte strin… |
1.3.6.1.4.1.644.2.4.1.8.5.7 | addComm | 0 | 0 | The type of communications utilized on this system connection. data (0) Data only voice (1) Voice only voiceAuToMu (2) Voice wi… |
1.3.6.1.4.1.644.2.4.1.8.5.8 | addConnSpeed | 0 | 0 | The data transmission speed in kilobytes per second (kbps) for this connection. The format is: -Speed in kbps-number of DS0-kbps… |
1.3.6.1.4.1.644.2.4.1.8.5.9 | addSrcTsBitmap | 0 | 0 | This is a bit field used for the source port timeslots. Each bit represents a link timeslot on the source port. Setting the bit i… |
1.3.6.1.4.1.644.2.4.1.8.5.10 | addDestTsBitmap | 0 | 0 | This is a bit field used for the destination port timeslots. Each bit represents a link timeslot on the destination port. Setting… |
1.3.6.1.4.1.644.2.4.1.8.5.11 | addBroadSrcId | 0 | 0 | The connection ID number of the broadcast source connection for a listener connection to read from. |
1.3.6.1.4.1.644.2.4.1.8.5.12 | addTestMode | 0 | 0 | This indicates whether the current connection is in test mode, and if so, the type of test access being used. none (0… |
1.3.6.1.4.1.644.2.4.1.8.5.13 | addCmdStatus | 0 | 0 | The command status for this system connection row/record. The value used in a SET will be replaced by a response value in the GET… |
1.3.6.1.4.1.644.2.4.1.8.5.14 | addSrcTrunkCProfile | 0 | 0 | This identifies the hex value used for the start of signaling. The valid values are in hex format 0 through f. |
1.3.6.1.4.1.644.2.4.1.8.5.15 | addDestTrunkCProfile | 0 | 0 | This identifies the hex value used for the end of signaling. The valid values are in hex format 0 through f. |