The command status for this system connection row/record.
The value used in a SET will be replaced by a response
value in the GET RESPONSE indicating success or failure.
ready-for-command (0)
initial default status for a row
Action States used in SET Command (1..99)
delete (2)
remove existing connection
create (3)
add new connection
createNsave (4)
add new connection and save to file immediately
deleteNsave (6)
delete existing connection and update map file
immediately
Response States used in GET RESPONSE Command (100..199)
delete-successful (102)
connection has been successfully deleted
add-successful (103)
connection has been successfully added
add-save-successful (104)
connection has been successfully added & saved
del-save-successful (106)
connection has been successfully removed & saved
Connection Error Codes used in GET RESPONSE Command (200..799)
err-general-connection-error (400)
An unknown system connection error occurred
err-src-broadcast-id-not-found (401)
Unable to find listener using this broadcast ID
err-src-port-in-use (402)
Source port cannot support multiple connections
err-dest-port-in-use (403)
Dest port cannot support multiple connections
err-conn-name-in-use (404)
Connection name already exists
err-invalid-broadcast-id (405)
Broadcast connection id out of valid range
err-invalid-src-slot (406)
Source slot number out of valid range
err-invalid-src-port (407)
Source port number out of valid range
err-invalid-src-timeslot (408)
Source timeslot number out of valid range
err-src-port-bandwidth-exceeded (409)
Source port cannot support requested timeslots
err-invalid-dest-slot (410)
Destination slot number out of valid range
err-invalid-dest-port (411)
Destination port number out of valid range
err-invalid-dest-timeslot (412)
Destination timeslot number out of valid range
err-dest-port-bandwidth-exceeded (413)
Dest port cannot support requested timeslots
err-invalid-command (414)
Unrecognized connection command-action
err-not-enough-bts-available (415)
Not enough available timeslots on Backplane
err-src-port-cannot-support-voice (416)
Device type in source slot does not support voice
err-dest-port-cannot-support-voice (417)
Device type in dest slot does not support voice
err-invalid-communications-for-device (418)
Only E1 devices support Au-law to Mu-law conversion
err-invalid-communications-type (419)
Unrecognized connection communications
err-invalid-conn-name (420)
Invalid connection name length
err-invalid-conn-type (421)
Unrecognized connection type
err-invalid-conn-speed (422)
Unrecognized connection speed code
err-invalid-conn-record (423)
Connection record contains missing or invalid fields
err-invalid-conn-id(425)
Connection Id out of range or already in use.
err-conn-not-saved-to-map(426)
Connection was added but save to file failed
err-connection-map-full (427)
No connections available for the map
err-invalid-card-type (428)
Invalid card type used for making the connection.
err-invalid-conn-bit-group (429)
Invalid bit-group selected for the globally set compression rate.
err-conn-max-channels-used (430)
All compression channels are in use
err-src-xlink-slot-not-assigned(431)
STM1X/OC3X virtual nest nbr undefined for src slot
err-dest-xlink-slot-not-assigned(432)
STM1X/OC3X virtual nest nbr undefined for dest slot
err-data-locked-by-another-user (450)
Another administrative user is making changes to this
part of the system via a terminal session. Check Event
Log for user name
err-snmp-parse-failed (500)
Agent could not parse variable
err-invalid-snmp-type (501)
Variable ASN type does not match Agent defined type
err-invalid-snmp-var-size (502)
Variable size is too big
Parsed from file ERI-DNX-SMC-MIB.mib
Module: ERI-DNX-SMC-MIB
Vendor: Eastern Research Inc.
Module: ERI-DNX-SMC-MIB
[Automatically extracted from oidview.com]
addCmdStatus OBJECT-TYPE SYNTAX ConnCmdStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The command status for this system connection row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failure. ready-for-command (0) initial default status for a row Action States used in SET Command (1..99) delete (2) remove existing connection create (3) add new connection createNsave (4) add new connection and save to file immediately deleteNsave (6) delete existing connection and update map file immediately Response States used in GET RESPONSE Command (100..199) delete-successful (102) connection has been successfully deleted add-successful (103) connection has been successfully added add-save-successful (104) connection has been successfully added & saved del-save-successful (106) connection has been successfully removed & saved Connection Error Codes used in GET RESPONSE Command (200..799) err-general-connection-error (400) An unknown system connection error occurred err-src-broadcast-id-not-found (401) Unable to find listener using this broadcast ID err-src-port-in-use (402) Source port cannot support multiple connections err-dest-port-in-use (403) Dest port cannot support multiple connections err-conn-name-in-use (404) Connection name already exists err-invalid-broadcast-id (405) Broadcast connection id out of valid range err-invalid-src-slot (406) Source slot number out of valid range err-invalid-src-port (407) Source port number out of valid range err-invalid-src-timeslot (408) Source timeslot number out of valid range err-src-port-bandwidth-exceeded (409) Source port cannot support requested timeslots err-invalid-dest-slot (410) Destination slot number out of valid range err-invalid-dest-port (411) Destination port number out of valid range err-invalid-dest-timeslot (412) Destination timeslot number out of valid range err-dest-port-bandwidth-exceeded (413) Dest port cannot support requested timeslots err-invalid-command (414) Unrecognized connection command-action err-not-enough-bts-available (415) Not enough available timeslots on Backplane err-src-port-cannot-support-voice (416) Device type in source slot does not support voice err-dest-port-cannot-support-voice (417) Device type in dest slot does not support voice err-invalid-communications-for-device (418) Only E1 devices support Au-law to Mu-law conversion err-invalid-communications-type (419) Unrecognized connection communications err-invalid-conn-name (420) Invalid connection name length err-invalid-conn-type (421) Unrecognized connection type err-invalid-conn-speed (422) Unrecognized connection speed code err-invalid-conn-record (423) Connection record contains missing or invalid fields err-invalid-conn-id(425) Connection Id out of range or already in use. err-conn-not-saved-to-map(426) Connection was added but save to file failed err-connection-map-full (427) No connections available for the map err-invalid-card-type (428) Invalid card type used for making the connection. err-invalid-conn-bit-group (429) Invalid bit-group selected for the globally set compression rate. err-conn-max-channels-used (430) All compression channels are in use err-src-xlink-slot-not-assigned(431) STM1X/OC3X virtual nest nbr undefined for src slot err-dest-xlink-slot-not-assigned(432) STM1X/OC3X virtual nest nbr undefined for dest slot err-data-locked-by-another-user (450) Another administrative user is making changes to this part of the system via a terminal session. Check Event Log for user name err-snmp-parse-failed (500) Agent could not parse variable err-invalid-snmp-type (501) Variable ASN type does not match Agent defined type err-invalid-snmp-var-size (502) Variable size is too big" ::= { addConnRecord 13 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.644.2.4.1.8.5.1 | addMapID | 0 | 0 | This number identifies the connection map where the new Connection is to be added. A value of zero will cause the system to add t… |
1.3.6.1.4.1.644.2.4.1.8.5.2 | addConnID | 0 | 0 | This number defaults to connection ID zero, which if used in a SET PDU, notifies the system to find and use the next available Co… |
1.3.6.1.4.1.644.2.4.1.8.5.3 | addConnName | 0 | 0 | This is the textual description of a connection within a given configuration map. This name is optional and will be generated by… |
1.3.6.1.4.1.644.2.4.1.8.5.4 | addConnType | 0 | 0 | The connection type for this system connection. fullDuplex (0) Bi-directional connection from Source port to Destination… |
1.3.6.1.4.1.644.2.4.1.8.5.5 | addSrcAddr | 0 | 0 | The source port timeslot address for this new connection. The format is represented using an IP address syntax (4 byte string). … |
1.3.6.1.4.1.644.2.4.1.8.5.6 | addDestAddr | 0 | 0 | The destination port timeslot address for this new connection. The format is represented using an IP address syntax (4 byte strin… |
1.3.6.1.4.1.644.2.4.1.8.5.7 | addComm | 0 | 0 | The type of communications utilized on this system connection. data (0) Data only voice (1) Voice only voiceAuToMu (2) Voice wi… |
1.3.6.1.4.1.644.2.4.1.8.5.8 | addConnSpeed | 0 | 0 | The data transmission speed in kilobytes per second (kbps) for this connection. The format is: -Speed in kbps-number of DS0-kbps… |
1.3.6.1.4.1.644.2.4.1.8.5.9 | addSrcTsBitmap | 0 | 0 | This is a bit field used for the source port timeslots. Each bit represents a link timeslot on the source port. Setting the bit i… |
1.3.6.1.4.1.644.2.4.1.8.5.10 | addDestTsBitmap | 0 | 0 | This is a bit field used for the destination port timeslots. Each bit represents a link timeslot on the destination port. Setting… |
1.3.6.1.4.1.644.2.4.1.8.5.11 | addBroadSrcId | 0 | 0 | The connection ID number of the broadcast source connection for a listener connection to read from. |
1.3.6.1.4.1.644.2.4.1.8.5.12 | addTestMode | 0 | 0 | This indicates whether the current connection is in test mode, and if so, the type of test access being used. none (0… |
1.3.6.1.4.1.644.2.4.1.8.5.14 | addSrcTrunkCProfile | 0 | 0 | This identifies the hex value used for the start of signaling. The valid values are in hex format 0 through f. |
1.3.6.1.4.1.644.2.4.1.8.5.15 | addDestTrunkCProfile | 0 | 0 | This identifies the hex value used for the end of signaling. The valid values are in hex format 0 through f. |