This indicates whether the current connection is in test
mode, and if so, the type of test access being used.
none (0) Connection has no active Tests
monitorSrc (1) Connection Source port is monitored
to a Test port
monitorDest (2) Connection Dest port is monitored
to a Test port
monitorSrc&Dest (3) Connection Source and Dest ports are
monitored to Test ports
splitSrc (4) Connection Source port is re-routed
to a Test port
splitDest (5) Connection Dest port is re-routed
to a Test port
splitSrc&Dest (6) Connection Source and Dest ports are
re-routed to Test ports
Parsed from file ERI-DNX-SMC-MIB.mib
Module: ERI-DNX-SMC-MIB
Vendor: Eastern Research Inc.
Module: ERI-DNX-SMC-MIB
[Automatically extracted from oidview.com]
addTestMode OBJECT-TYPE SYNTAX TestAccess MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates whether the current connection is in test mode, and if so, the type of test access being used. none (0) Connection has no active Tests monitorSrc (1) Connection Source port is monitored to a Test port monitorDest (2) Connection Dest port is monitored to a Test port monitorSrc&Dest (3) Connection Source and Dest ports are monitored to Test ports splitSrc (4) Connection Source port is re-routed to a Test port splitDest (5) Connection Dest port is re-routed to a Test port splitSrc&Dest (6) Connection Source and Dest ports are re-routed to Test ports" ::= { addConnRecord 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.644.2.4.1.8.5.1 | addMapID | 0 | 0 | This number identifies the connection map where the new Connection is to be added. A value of zero will cause the system to add t… |
| 1.3.6.1.4.1.644.2.4.1.8.5.2 | addConnID | 0 | 0 | This number defaults to connection ID zero, which if used in a SET PDU, notifies the system to find and use the next available Co… |
| 1.3.6.1.4.1.644.2.4.1.8.5.3 | addConnName | 0 | 0 | This is the textual description of a connection within a given configuration map. This name is optional and will be generated by… |
| 1.3.6.1.4.1.644.2.4.1.8.5.4 | addConnType | 0 | 0 | The connection type for this system connection. fullDuplex (0) Bi-directional connection from Source port to Destination… |
| 1.3.6.1.4.1.644.2.4.1.8.5.5 | addSrcAddr | 0 | 0 | The source port timeslot address for this new connection. The format is represented using an IP address syntax (4 byte string). … |
| 1.3.6.1.4.1.644.2.4.1.8.5.6 | addDestAddr | 0 | 0 | The destination port timeslot address for this new connection. The format is represented using an IP address syntax (4 byte strin… |
| 1.3.6.1.4.1.644.2.4.1.8.5.7 | addComm | 0 | 0 | The type of communications utilized on this system connection. data (0) Data only voice (1) Voice only voiceAuToMu (2) Voice wi… |
| 1.3.6.1.4.1.644.2.4.1.8.5.8 | addConnSpeed | 0 | 0 | The data transmission speed in kilobytes per second (kbps) for this connection. The format is: -Speed in kbps-number of DS0-kbps… |
| 1.3.6.1.4.1.644.2.4.1.8.5.9 | addSrcTsBitmap | 0 | 0 | This is a bit field used for the source port timeslots. Each bit represents a link timeslot on the source port. Setting the bit i… |
| 1.3.6.1.4.1.644.2.4.1.8.5.10 | addDestTsBitmap | 0 | 0 | This is a bit field used for the destination port timeslots. Each bit represents a link timeslot on the destination port. Setting… |
| 1.3.6.1.4.1.644.2.4.1.8.5.11 | addBroadSrcId | 0 | 0 | The connection ID number of the broadcast source connection for a listener connection to read from. |
| 1.3.6.1.4.1.644.2.4.1.8.5.13 | addCmdStatus | 0 | 0 | The command status for this system connection row/record. The value used in a SET will be replaced by a response value in the GET… |
| 1.3.6.1.4.1.644.2.4.1.8.5.14 | addSrcTrunkCProfile | 0 | 0 | This identifies the hex value used for the start of signaling. The valid values are in hex format 0 through f. |
| 1.3.6.1.4.1.644.2.4.1.8.5.15 | addDestTrunkCProfile | 0 | 0 | This identifies the hex value used for the end of signaling. The valid values are in hex format 0 through f. |